+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
Universal USB Charger in Forum Suppliers; Just wondering - does ELP's Universal USB Charger work on KR808D-1 batts as well as the Joye models (e.g. 510)? ...
  1. #1
    Super Member ECF Veteran Madame Psychosis's Avatar
    Join Date
    Nov 2009
    Location
    East Coast Gypsy
    Posts
    817

    Default Universal USB Charger

    Just wondering - does ELP's Universal USB Charger work on KR808D-1 batts as well as the Joye models (e.g. 510)?

    It looks different from the little USB dongles sold by some of the China suppliers as "Universal" so I'm wondering if this one has the same versatility (I like the longer cord on ELP's model, so I'm hoping it fits what I need).

    Thanks!

    M.Psych.

  2. Advertisement
  3. #2
    Forum Supplier ECF Veteran eplanet's Avatar
    Join Date
    Mar 2009
    Location
    Long Island, New York
    Posts
    1,261

    Default

    Hi M.Psych,

    the answer is yes, it will fit on all of those models.
    We support Vaping & Freedom...
    eliquidplanet.com -- Everything you need...What's your Essence?.... [B] The HeliX is here!!!/B]

  4. #3
    Ultra Member ECF Veteran sandyk's Avatar
    Join Date
    Aug 2009
    Location
    Clarkston, Michigan
    Posts
    1,586

    Default

    What amp and mah is that Universal Charger...............should be at least 1 amp for the kr808 and at least .5 amp for the 510 although the 1 amp is better for the 510 also???????

    Whoops sorry, I was thinking she meant the wall charger/usb. By the way, what is the Amp or mah on that wall charger/usb??
    Last edited by sandyk; 12-01-2009 at 12:12 AM.
    My Own Brews/Joye LR attys/Riva Batteries

  5. #4
    Ultra Member ECF Veteran sandyk's Avatar
    Join Date
    Aug 2009
    Location
    Clarkston, Michigan
    Posts
    1,586

    Default

    It isn't that hard to look on the charger and check the amps. It just surprises me how little suppliers know about what they sell. You aren't the only one, I must have asked about 2 suppliers and no one knows the amps...sheesh!!!!!!!!!!!!!!! Post the specs so we know what we are buying!
    My Own Brews/Joye LR attys/Riva Batteries

  6. #5
    Forum Supplier ECF Veteran eplanet's Avatar
    Join Date
    Mar 2009
    Location
    Long Island, New York
    Posts
    1,261

    Default

    Hey sandy...lol, I just do not have the charger with me at the moment...If I cant figure out the amps by reading the charger I can always as cisco ...lol
    We support Vaping & Freedom...
    eliquidplanet.com -- Everything you need...What's your Essence?.... [B] The HeliX is here!!!/B]

  7. #6
    PV Master ECF Veteran Scottbee's Avatar
    Join Date
    Sep 2009
    Location
    Okauchee Lake, WI
    Posts
    3,607

    Default

    Quote Originally Posted by sandyk View Post
    It isn't that hard to look on the charger and check the amps. It just surprises me how little suppliers know about what they sell. You aren't the only one, I must have asked about 2 suppliers and no one knows the amps...sheesh!!!!!!!!!!!!!!! Post the specs so we know what we are buying!
    Sandy,

    You are probably not getting good answers from the suppliers because you are confused regarding the chargers.

    mAh (milli-Amp hour) is a rating for batteries, not chargers. It is an indication of "capacity". In other words.. how much energy is stored in the battery.

    "Amps" can be used when talking about chargers... but it rarely is. The numbers that you listed (1A for the KR808D-1 and .5A for the 510) are not correct. Not even close. You may have been thinking of the current ratings for USB adapters for pass-throughs. But even at that.. your numbers are wrong.

  8. #7
    Ultra Member ECF Veteran sandyk's Avatar
    Join Date
    Aug 2009
    Location
    Clarkston, Michigan
    Posts
    1,586

    Default

    Well here is what one supplier told me...........

    Can_supplier
    CAN Supplier

    Join Date: Oct 2009
    Posts: 56

    Default
    You could use the 901 PT off the plugin wall adapter also, but in that case the 1 A/1000 mA is even more important, as its "sucking" current straight from the adapter.

    In the 510 case if you don't get enough power from whatever you have it pulled into, it will loose strength over time as the battery dies (assuming you are starting with a charged batt in the PT) because it is being drained at a greater rate than it can charge. For the 901, if the power from the adapter is not there, it will be a continuously bad vape.
    __________________
    Evapers - Evaper.com Canada's Best Source for E-cigs and E-liquid Canada's newest supplier!!
    My Own Brews/Joye LR attys/Riva Batteries

  9. #8
    Ultra Member ECF Veteran sandyk's Avatar
    Join Date
    Aug 2009
    Location
    Clarkston, Michigan
    Posts
    1,586

    Default

    I got this today from a friend of mine who uses it for her PT (not a 510):

    I tried MANY others before I tried this one It's cheap and works At this price I'd get 2

    The one she is talking about is a 2 amp USB/wall charger.......she vapes right off of that.

    This is the one she uses:


    USB Dual Power Adapter


    * Fast Charging Great for iPhones
    * USB Dual Ports Output: 5.0V DC +/- 5%
    * 2.7"L x 2.0"W x 0.7"H
    * 2Amps Power = FAST Charging

    Power Weight
    • Input: 100-240 VAC 50/60HZ 3.0 oz
    • Output: 5.0V DC +/- 5%
    • Current (1 port): 2A Dimensions
    • Current (2 port): 1A 2.7"L x 2.0"W x 0.7"H
    2 USB ports in one sleek lightweight package.
    2Amps Charging Power.
    4 Times more than most USB chargers.
    Fast Charging Dual USB Port
    Collapsible plug
    Last edited by sandyk; 12-07-2009 at 03:27 AM.
    My Own Brews/Joye LR attys/Riva Batteries

  10. #9
    Super Member
    Join Date
    Oct 2009
    Location
    Birmingham Al
    Posts
    932

    Default

    So what kind is it and where did she get it?

  11. #10
    PV Master ECF Veteran Scottbee's Avatar
    Join Date
    Sep 2009
    Location
    Okauchee Lake, WI
    Posts
    3,607

    Default

    Sandy,

    You are confusing the heck out of the issue.

    The OP asked about battery chargers. Chargers for the batteries that are used on the KR808D-1 and other PV's like the 510.

    You are off on some tangent talking about USB adapters and "wall chargers" that can be used to power a PT (Pass-Thru).

    Different subject... different items.. different purpose.

+ Reply to Thread
Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

SEO by vBSEO