confusion on my new ingulgence - Page 17
Page 17 of 21 FirstFirst ... 7131415161718192021 LastLast
Results 161 to 170 of 205

Thread: confusion on my new ingulgence

  1. #161
    Super Member Verified Member
    ECF Veteran

    Join Date
    Sep 2009
    Location
    In The Plex
    Posts
    591
    Blog Entries
    2

    Default

    Anyone else have this issue with the juice overflowing from the atomizer and filling the threadcaps ? I know since I drip , that I get a bit of run off lol.

    The liquid is going to form deposits with time, and solidify , so by not maintaining the device, I can see this happening for sure.

  2. #162
    Super Member ECF Veteran
    Join Date
    Jul 2009
    Location
    Manhattan Upper West Side
    Posts
    515

    Default

    Mud - Drip less and when atty Is cool. These are my findings after a couple of weeks :
    801 2-3 drops EM juice. If the atty is warm or hot the juice will flow freely. Putting the tip on will force the liquid out. Putting on a drip tip eliminates part of the problem. Using a more viscous juice eliminates almost all of the problem.
    901 1-2 drops same as above.
    401 and 510 have less of a problem.
    After numerous changes, I don't have any atty's fail. I am currently using an old EM 801 marble atty that I thought was ng, at 7.4 in one Indulgence. After an initial bad taste, it vapes warm, but good. I have 3 Indulgence in rotation, so I'll see how long it lasts. That one doesn't leak as much as the new ones.

  3. #163
    Super Member ECF Veteran Jumi's Avatar
    Join Date
    Feb 2010
    Location
    Athens, Greece
    Posts
    309

    Default

    I believe this issue with 3V 16340 over-reacting in low resistance atties is something that should be fixed in later batches. With 808 cartomizers also they don't work... It is self-defeating to have batteries with great discharge rate that protection stops them functioning waaaaay before their limit and other batteries with lower specs to exceed them easily and work fine.

    If the specs of these batteries are accurate then these can be the best batteries there is for 6V vaping if this is fixed.

  4. #164
    Moved On
    Join Date
    Jan 2010
    Location
    Tru Nor Cal
    Posts
    402

    Default

    lack of airflow & leakage on 801 yes.
    others seem to be fine for me just tiny bit of leakage on others from overfill.

    801 regular atties rub the cap so .01 airflow
    cut down the atty a bit & it helps airflow but still not good.
    notch the adapter & better airflow & get leakage in upright position sitting for couple minutes.

  5. #165
    Super Member ECF Veteran
    Join Date
    Apr 2009
    Location
    Somewhere in Upstate NY
    Posts
    721

    Default

    I want to strongly suggest Eastmall at least sell extra adapter caps and adapters the way they do batteries. What happens if a year from now my adapter cap fails? Would I have to buy a whole new unit? My reason for buying a big battery and versatile mod is to last a long time and not having these pieces sold separate worries me.

  6. #166
    Moved On
    Join Date
    Jan 2010
    Location
    Tru Nor Cal
    Posts
    402

    Default

    Quote Originally Posted by prr2freya View Post
    I want to strongly suggest Eastmall at least sell extra adapter caps and adapters the way they do batteries. What happens if a year from now my adapter cap fails? Would I have to buy a whole new unit? My reason for buying a big battery and versatile mod is to last a long time and not having these pieces sold separate worries me.
    agree's & I have suggested it to them many times.
    & it states it comes with 4caps & adapters.
    but comes with 1 cap & 4adapters.
    I have suggested to them to fix that.

    i ordered because I read & seen it had 4 caps & adapters.
    Was perfect for me. As the adapters are so tiny LOL..

    I am waiting for friend to get some time & make me some caps.

    Since I don't have anything to order & request extra's.

  7. #167
    Di
    Di is offline
    ECF Guru ECF Veteran
    Join Date
    Oct 2008
    Location
    *Australia*
    Posts
    10,163

    Default

    Quote Originally Posted by prr2freya View Post
    I want to strongly suggest Eastmall at least sell extra adapter caps and adapters the way they do batteries. What happens if a year from now my adapter cap fails? Would I have to buy a whole new unit? My reason for buying a big battery and versatile mod is to last a long time and not having these pieces sold separate worries me.
    Quote Originally Posted by Kuya Dave View Post
    agree's & I have suggested it to them many times.
    & it states it comes with 4caps & adapters.
    but comes with 1 cap & 4adapters.
    I have suggested to them to fix that.

    i ordered because I read & seen it had 4 caps & adapters.
    Was perfect for me. As the adapters are so tiny LOL..

    I am waiting for friend to get some time & make me some caps.

    Since I don't have anything to order & request extra's.

    I have asked before,

    and I have just asked again
    if we can sell the adapters and cap set as an accessory pack.

    the answer is

    YES

    they will be available as an accessory pack on the new web shop

    we are discussing price -- it will be 5.00

    everyone throw flowers at my feet, --- hahahahaha





    Last edited by Di; 04-30-2010 at 01:21 PM.

  8. #168
    PV Master Verified Member
    ECF Veteran
    Supporting Member
    blondeambition3's Avatar
    Join Date
    Dec 2009
    Location
    FL, USA
    Posts
    3,440

    Exclamation

    Quote Originally Posted by jgdovin View Post
    So I just got my indulgence in and its my first mod. I got a gold, along with an hv 510 atty. I love the 6v 510, its my first 510 and absolutely love it. But I have a few questions that someone else had the same problem.

    So heres how it went, was asking someone about a charger for the 16340's he told me to make sure I liked the 6v experience. I said I loved it with an HV atty, he told me try a regular atty. I threw my 510 standard atty on, no sizzle, no nothing at all. didnt move batteries. So I thought maybe its a bum attie, or I popped it. So didnt touch atty, and put the 3.7v cup on, and it worked just fine with same attie.

    hmm.. weird.. threw back on 6v cup, nothing... threw back on hv atty, worked great. So did the same thing with standard 901 atty, same results.. The only atty that will work with my 6v cup and batteries is an HV atty. Is there some kind of circuit stopping it from working on regular atties?

    Other than that and the slight discoloration between different parts (not horrible) I love this mod from my first impressions. Can anyone help?


    EDIT: Also, The website says "The Universal Battery Charger (provided with the Indulgence Manual STARTER KIT) is suitable for 3v 16340 (CR123A) batteries, The battery has PCB to protect itself when it is fully charged"

    But I was informed that it kills the batteries faster charging 3v batteries on a 3.7v charger. Any suggestions? If you can use that charger, do you charge them one at a time? I thought it was unsafe to charge them seperately.
    I'm dying to get a GOLD Indulgence! (all they have are silver & titanium right now).... Where'd you find a Gold one?.... Does anyone know if there are any US distributors for the Eastmall Indulgence?
    A simple handmaiden for Christ



  9. #169
    Di
    Di is offline
    ECF Guru ECF Veteran
    Join Date
    Oct 2008
    Location
    *Australia*
    Posts
    10,163

    Default

    Quote Originally Posted by blondeambition3 View Post
    I'm dying to get a GOLD Indulgence! (all they have are silver & titanium right now).... Where'd you find a Gold one?.... Does anyone know if there are any US distributors for the Eastmall Indulgence?

    The gold indulgence sold out very quickly both times it was released in shop

    I am sure it will come again,

    an no, I do not know of any USA distributors for the Eastmall Indulgence.


    and if anyone else does,

    please do not post it in David's forum thank you.

    This is Eastmall Forum

  10. #170
    Super Member ECF Veteran
    Join Date
    Apr 2009
    Location
    Somewhere in Upstate NY
    Posts
    721

    Default

    Great! I am very glad the caps and adapters will be available as an accessory pack.. I will def get them to be safe. I hope they and the LR atties are ready by the 10th when i make my next order.. after that it will be a LONG time before I can order again, but this is a pretty big order so if they are not there yet....

    Quote Originally Posted by Di View Post

    I have asked before,

    and I have just asked again
    if we can sell the adapters and cap set as an accessory pack.

    the answer is

    YES

    they will be available as an accessory pack on the new web shop

    we are discussing price -- it will be 5.00

    everyone throw flowers at my feet, --- hahahahaha






Tags for this Thread

Bookmarks