Results 1 to 5 of 5

Thread: Vivi Nova Coil Head?

  1. #1
    Senior Member ECF Veteran
    Join Date
    Sep 2009
    Location
    Bossier City, La
    Posts
    299

    Default Vivi Nova Coil Head?

    What's with the Vivi Nova Coil Heads I bought from you? I installed one and it flooded immediately. I removed it and placed it next to my original coil head and yours is a good 5mm shorter than the original (no wonder it flooded).

  2. Advertisement
  3. #2
    Super Member ECF Veteran vikeme28's Avatar
    Join Date
    Jan 2012
    Location
    Waste Lands
    Posts
    575

    Default

    its probably the newer version head. they are a little shorter. all you have to do is pull up on the silicone sleeve that goes on the top. pull it up a little bit then when you srew your top on it will push it back down but will stay sealed to the top.
    whish i knew they were the new ones, i just ordered a bunch of diy stuff and i need the new heads for my old vivi. i would have added a couple.

  4. #3
    Senior Member ECF Veteran
    Join Date
    Sep 2009
    Location
    Bossier City, La
    Posts
    299

    Default

    Thanks for that info. Since V1 and V2 are interchangeable it should have been noted on their site that these were not usable. Well live and learn. Guess I will find a new supplier.

  5. #4
    Forum Supplier ECF Veteran linnx's Avatar
    Join Date
    Apr 2009
    Location
    Washington USA
    Posts
    1,593

    Default

    We also thought everything on Nova was interchangeable. So it seems you were looking for the older head replacements. So it sounds like a slight modification is needed on the newer heads? I'll have to ask Vision if there is any information about this and why they did not mention it.

    Sorry for the inconvenience.
    Toll Free 1-888-418-2215
    web: ecigexpress.com

  6. #5
    Super Member ECF Veteran vikeme28's Avatar
    Join Date
    Jan 2012
    Location
    Waste Lands
    Posts
    575

    Default

    I believe they are interchangeable. Like I said all you have to do is pull up on the sleeve that goes over the wicks about 5mm and it will seal to the top.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •