Page 1 of 49 1234511 ... LastLast
Results 1 to 10 of 483
Like Tree427Likes

Thread: Atmistique mod's accessories and more

  1. #1
    Resting In Peace ECF Veteran billakosgr's Avatar
    Join Date
    Oct 2011
    Location
    Athens,Greece
    Posts
    209

    Default Atmistique mod's accessories and more

    Hello to all people all over the ECF community.

    We are really happy to be a part of the ECF and share our first creations for mods and not only.
    We are vapers for a yeah and a half and we are get involed with creations for about a month so
    here we will publish our first creations we have made and hope you liked them.

    1.The Twins (Telescope extension sleeve for Provari)

    Twins is a pair of ss telescopic tubes which gives you the opportunity especially on mini Provari to use
    both 18500 and 18650 batteries without taking off or add more tubes but only taking of your end cap.
    We have focus on it to have exact the same finish with the Provari both end caps to make a best match.

    Here is some photos of it.










    2.Hippo (upper sleeve and air flow control for Provari)

    Hippo is a special sleeve which gives you the straight look at the upper cap to the Provari and also
    it can be used as an air flow regulator by right-left turning because of the o-ring it has at the upper place.



    And here is some photos to see.









    3.Bulli A2 collection

    For some old lovers of the Bulli A2 atomizer we have made some drip adaptors that let you put your
    favourite drip tip or adaptor that is ready drip tip end.made from Delrin or SS material.








    4.UFS-510 adaptor

    We are working on making an adaptor which gives you the opportunity to use UFS in any 510 connection mod except the GGTS.
    Here is some pictures of the brass prototype before goes to production with some changes will be made.
    The final piece will be made from stainless steel material.







    The first post will be updated with news when they are available.
    Last edited by billakosgr; 12-16-2012 at 11:46 PM.

  2. #2
    PV Master Verified Member
    ECF Veteran
    Supporting Member
    dspin's Avatar
    Join Date
    Sep 2010
    Location
    USA
    Posts
    7,352

    Default

    Great pieces for the UFS and Bulli
    cigarbabe likes this.

    JGG Proto,GGTS, GGTB , Stealth, JGG, Caravela, Polidiac #6, GUS Lord #78, Ti Prometey L.E. #1, Prometey 1, Prometey 2 #1, 17, Achilles #1, Gryphon,Hydra 2, DID, Mini DID, ZAU, ZAG, Hellfire, Iatty, UFS V1, Odysseus, Penelope, Nahual #16, Bliss, Nahual Proto Genisis ,Kato Hammer #536,

  3. #3
    Resting In Peace ECF Veteran billakosgr's Avatar
    Join Date
    Oct 2011
    Location
    Athens,Greece
    Posts
    209

    Default

    Thanks dspin.

    Also for provari will be available soon the third part of trilogy...

  4. #4
    Resting In Peace ECF Veteran billakosgr's Avatar
    Join Date
    Oct 2011
    Location
    Athens,Greece
    Posts
    209

    Default

    Gemini Drip-tip 316 ss

    The third part of our aesthetic intervention comes with GEMINI.
    A driptip based on known cone of provari.
    The GEMINI is made with same finishing quality of "twins" and "hippo" and stainless steel AISI 316.

    Totally resistant to rust.
    The Stainless Steel protects itself. Reacts with atmospheric oxygen and creates a protective film.
    There is no surface coating. That appears on the surface exists throughout the bulk of the material.
    Temperature resistant and fire.
    100% recyclable.

    Design attempted to simulate the above cone, keeping accurate angles and as much as possible of the known "tears."
    The mouthpiece also has the same angles but with appropriate treatment to a very beauty steaming.
    Finally we created a cone entry on the base hole, in order to reduce the well-known phenomenon of water vapor in the lower seat of driptips.

    Visible height 20mm
    Maximum diameter 12mm

    An early sign in the photo below.
    Soon we will notify you of the availability and the cost.



    Atmistique mod's accessories and more-603363_4798262201962_1837855748_n.jpg
    Last edited by billakosgr; 12-19-2012 at 10:27 PM.
    k3v1n and Sisq0 like this.

  5. #5
    Full Member
    Join Date
    Jul 2012
    Location
    London U.K
    Posts
    128

    Default

    Some nice things for the Provari there...do you have a web-site ?
    If not, how much are you charging for the Provari add on's ?

  6. #6
    Resting In Peace ECF Veteran billakosgr's Avatar
    Join Date
    Oct 2011
    Location
    Athens,Greece
    Posts
    209

    Default

    Charges is:
    Twins:31 euros
    Hippo:35 euros
    Pack both:54 euros
    Gemini drip:soon

    All prices includes paypal fees and registered tracked shipping worldwide.

    For any further info let me know.
    Website not available until complete online constructions.

    Thanks.

  7. #7
    Full Member Verified Member Cracker23's Avatar
    Join Date
    Nov 2011
    Location
    NE Atlanta metro
    Posts
    35
    Blog Entries
    1

    Default

    Look like nice products for Provari. Any matches for black satin mini?

  8. #8
    Resting In Peace ECF Veteran billakosgr's Avatar
    Join Date
    Oct 2011
    Location
    Athens,Greece
    Posts
    209

    Default

    All matches because our first priority was to have same finish and quality as Provari's caps and here they are....

  9. #9
    Ultra Member* Verified Member
    ECF Veteran
    Supporting Member
    rwechsler's Avatar
    Join Date
    Nov 2011
    Location
    Los Angeles, CA
    Posts
    2,580

    Default

    Quote Originally Posted by billakosgr View Post
    I think I was just chatting with you over on Facebook! Glad to see you guys are also here on ECF. Count me in for one of the Gemini drip tips, but as for the UFS->510 base, I was wondering if you'll be offering it in SS and with no knurling? I would love one for my Z-Atty-G.

  10. #10
    Resting In Peace ECF Veteran billakosgr's Avatar
    Join Date
    Oct 2011
    Location
    Athens,Greece
    Posts
    209

    Default

    This is just a brass sample.The final product will be from stainless steel material and with same knurling as GG UFS to make a match with it.
    Maybe on Z-Atty-G knurling gives a different picture with this combo.

    Also the drip tip post updated with some pictures more...

Page 1 of 49 1234511 ... LastLast

Tags for this Thread

Bookmarks