+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 19
Refilling the Green Cig from V4L in Tips and Tricks; Does anyone have any suggestions on how to refill the Green Cig carts? I bought one recently, assuming the carts ...
  1. #1
    Full Member
    Join Date
    Sep 2009
    Posts
    20

    Default Refilling the Green Cig from V4L

    Does anyone have any suggestions on how to refill the Green Cig carts? I bought one recently, assuming the carts where the same as the Vapor King carts, but they aren't. If anyone has any tips on how to refill the I would greatly appreciate it. I have been trying dripping the juice straight into the atomoizer end, and that seems to be working somewhat.

  2. Advertisement
  3. #2
    RsL
    RsL is offline
    Super Member ECF Veteran RsL's Avatar
    Join Date
    Apr 2009
    Location
    Minneapolis
    Posts
    756

    Default

    The best way is to remove the end cap and then using a dental pick, pry out the cartridge that holds the poly fill. Once out, just fill it up with juice and reinsert. They are tough to get out the first time and that's why you really need something like a dental pick which is sturdy enough to do the job.


  4. #3
    Full Member ECF Veteran radwor's Avatar
    Join Date
    Aug 2009
    Location
    san diego
    Posts
    129

    Default

    Quote Originally Posted by RsL View Post
    The best way is to remove the end cap and then using a dental pick, pry out the cartridge that holds the poly fill. Once out, just fill it up with juice and reinsert. They are tough to get out the first time and that's why you really need something like a dental pick which is sturdy enough to do the job.
    Yes that will work but you will trash the tube, especially if its the aluminium one. I found the best way to get the cart out is to use a thin stiff wire like the inside wire from a guitar string (steel) with a 1/16 L bend at the end. slide the L bent doun the straight edge of the cart turn 45 degrees and pull the cart out. works super easy.

  5. #4
    Super Member ECF Veteran
    Join Date
    Aug 2009
    Location
    Rogersville, MO - USA
    Posts
    621

    Default

    ... Then take out the little black o-ring, scrape away the white glue / caulk. then tap the carto until the interior white cartridge gets down to where you can easily pull it out with a pin or clip of some kind... pull the filler out of it, add 10 - 15 drops of your fav liquid. Put the filler back in, and top off slowly a drop at a time until it stops soaking it up. NOW you have a completely full and ready to go cartridge for your cartomizer.

    Be sure when you put it back in, that the longest / raised part of the wet end, is pushed down onto the raised / highest part of the wick that you can see down inside of the cartomizer. Pop the white mouthpiece back on the top. Good to go!

    Take care,
    - Hap

  6. #5
    Full Member
    Join Date
    Sep 2009
    Posts
    20

    Default

    Ecxellent, thanks for the advice. I was taken aback by the difference between the Green Cig carts and the Vapor King carts. Should I discard the black O-ring afterwards? It doesn't seem possible to get it back in the same way it came out.

  7. #6
    RsL
    RsL is offline
    Super Member ECF Veteran RsL's Avatar
    Join Date
    Apr 2009
    Location
    Minneapolis
    Posts
    756

    Default

    Quote Originally Posted by radwor View Post
    Yes that will work but you will trash the tube, especially if its the aluminium one. I found the best way to get the cart out is to use a thin stiff wire like the inside wire from a guitar string (steel) with a 1/16 L bend at the end. slide the L bent doun the straight edge of the cart turn 45 degrees and pull the cart out. works super easy.
    That sounds like it would work better than using a dental pic. However, I do use a dental pic and I don't trash the tube. Ya just gotta be careful.


  8. #7
    RsL
    RsL is offline
    Super Member ECF Veteran RsL's Avatar
    Join Date
    Apr 2009
    Location
    Minneapolis
    Posts
    756

    Default

    Quote Originally Posted by Lloyd View Post
    Should I discard the black O-ring afterwards? It doesn't seem possible to get it back in the same way it came out.
    Yeah, I just throw it away.


  9. #8
    Full Member
    Join Date
    Sep 2009
    Posts
    20

    Default

    you guys are awesome, thanks so much for the help. Take care

  10. #9
    Ultra Member ECF Veteran
    Join Date
    May 2009
    Location
    Treasure Coast Florida =)
    Posts
    1,247

    Default Ok HAP....

    Can you PLEASE make a video??? Prutty Please??? I am sure all Green Cart fans would Love this!!

  11. #10
    Full Member
    Join Date
    Sep 2009
    Posts
    20

    Default

    Your description was great, but I am sure a video would be even better. I second that notion!

+ Reply to Thread
Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

SEO by vBSEO