I call it ADP Mod.. Auto Drip Mod!

[Jaydee]

Day 3 of this mod and it's working great. Thanks Scotty

[SCOTTYBALLS]

Originally Posted by Zaija

When I remove my carts I twist them off, could that be why it's sticking?

Yes never twist them off...

[MaxUT]

The ONLY time you ever twist a cart while removing it is, when it's really stuck and there's no other way to get it off. If it's hard to get off, try rocking it side to side just a little as you pull on it.

Twisting the cart when it's in contact with the atty bridge is guaranteed to mess up the cart filler and leave shreds of it on the atty.

[goonie]

The auto drip mod is genius ... Thank you

[Zaija]

There is deffinatly a learning curve with the ecigs, any additional tips?

(especially to get this mod to work?)

I feel so silly struggling with this, while everyone else has it perfected!
lol

[sandy]

the string mod works the best with the 510 carts. I've been trying it with 901's but definitely don't get the same success. No idea why. There must be some difference inside the carts. Anyone with same experience?

[SCOTTYBALLS]

Originally Posted by Zaija

There is deffinatly a learning curve with the ecigs, any additional tips?

(especially to get this mod to work?)

I feel so silly struggling with this, while everyone else has it perfected!
lol

if its not working with a 510 I would change your atty!! you are probly smoking a dud atty I went thew 3 before I found one that hit right..

[mcl5000]

Originally Posted by newkirk

ummm... Have you noticed that the entire wick/bridge structure in the atomizer is metal?

j

Yeah, but they're made to have juice in them. Springs that I pull out of pens are meant to be in a pen.

Either way, I finally got around to trying this mod (used both straws and the spring) and it works great. You definitely have to draw a little harder to get the last half of the juice, but it's still a better solution than the PTB plug.

Good work here!

[julianka]

I've tried the spring and it DOES work, but I'm doing it with a 401 and it's awful having to cut the spring SO small and try to get it in the tiny little cart. People who are doing this with 401s, please tell me exactly what you're doing to make it work without giving you a temper tantrum.

[SCOTTYBALLS]

Originally Posted by julianka

I've tried the spring and it DOES work, but I'm doing it with a 401 and it's awful having to cut the spring SO small and try to get it in the tiny little cart. People who are doing this with 401s, please tell me exactly what you're doing to make it work without giving you a temper tantrum.

If the 401 is the same as a 4081 (cart has a lil white cart inside of it) pull the lil white cart out with tweezers and cut the spring about 2-3 mm from the top fill it up and pop in a peice of polly insert back in the main cart..