I call it ADP Mod.. Auto Drip Mod!

[Don'tReadTheRunes]

I find this thread one day after finally finding a place near me that sells PTB. Tried the PTB and it worked well as advertised. Next day I try this mod and now I have a bunch of Bavarian Wild Berry that I need to drink. Wish they would of had Earl Grey.

[Midnight_toker]

Aye, this mod is great.

Thanks for posting it up.

MT

[BenJammin]

If the 401 is the same as a 4081 (cart has a lil white cart inside of it) pull the lil white cart out with tweezers and cut the spring about 2-3 mm from the top fill it up and pop in a peice of polly insert back in the main cart..

An even easier way to remove the white cart on a 4081 is to poke it out with a paperclip pushed in through the little vaping hole. I've also used a drinking straw as a "cart wrench". Use a straw small enough to fit inside the cart, but large enough to fit around the outside of the tiny reservoir cup. Push, Twist, Pull... Out! The tweezers I have are all too wide to fit all the way down to the cup. Before I switched over to a DSE601 pipe, I even made myself a little tool out of a paperclip cut to length and a cartridge plug as a handle. I used it to push the lil cup out flush with the mouth of the cart for easier refilling.
I've been dripping on the pipe almost exclusively for a couple of months now, but this ADM mod has got me curious now I'm going to give it a go for the pipe. PTB showed promise initially, but it was hit or miss with leakage issues. Everyone here seems to be getting such good results it's be a shame not to try it!

[jeffcmfrt]

Works great wit 510 and Silver Bullet!

[julianka]

On the 401: Lengthwise is it. This dawned on me last night when I went to bed and was trying to get to sleep (I almost got up out of bed to try it but I resisted until morning.) I'm using it now and it's perfect.

[crip]

working great on 901 2nd try, haah first was straw was good but instantly flooded cuz the fill moved got stuck,, i twist my carts all the time... i guess thats a bad habit lol,

so the spring get 2 from a pen cut in half then unwound at bottom so it stays in cart,, then took half the polyfill and made a lil ball and twisted it into the spring so it cant come out,, so now the fill part is a lil harder but not really,,

took my dental flos pix,, its plastic and pointed on end,, slide that in the side of fill push it over a lil and drip on to the plastic pic and it will drip right into the cart 10 - 12 drops and shes full and the filler isnt coming out..

I like it now,,, thx everyone..

[dwillings]

Thank you so much for this mod. I've been dripping for the past couple of weeks and now I think I may be a cart man again. This mod works great! Took me just a minute or so to do it and it's performing quite well! Thank you again!!

[PixieCut]

I love all you guys that experiment with this stuff!!! This is working great on my 801 cart!!
I have been thoroughly disgusted with the wasted liquid in my carts. I was constantly topping off the cart.
Yea! Thanks for the great info. Now I am off to search for more clicky pens....

[Guitarslinger]

For those of you that might have some old disposable lighters laying around (best to get rid of them anyway so you don't accidently "light" your e-cig like I did, lol), you can remove the metal holder that goes around the striking wheel, pry apart the plastic tabs and remove the wheel. Underneath the flint is a fairly long, very narrow spring (careful when you do this, some tend to fly across the room). I've used these springs for a variety of things, you can also stretch them out a bit to get more use from them. Just a tip

[RockStar]

Great idea Guitarslinger, thanks. I've been using this mod for a week and it works awesome! I've pretty much given up dripping thanks to this mod.