E-Cigarette Forum - ProVape http://www.e-cigarette-forum.com/forum/ US, West Coast en Sun, 19 May 2013 23:37:42 GMT vBulletin 60 http://www.e-cigarette-forum.com/forum/images/misc/rss.png E-Cigarette Forum - ProVape http://www.e-cigarette-forum.com/forum/ Recommended 18650 batteries ? http://www.e-cigarette-forum.com/forum/provape/418736-recommended-18650-batteries.html Sat, 18 May 2013 14:24:15 GMT Are these panasonic CGR18650CH (with button top) batteries still the recommended batteries for use in a provari? Trying to look for long lasting... Are these panasonic CGR18650CH (with button top) batteries still the recommended batteries for use in a provari?

Trying to look for long lasting charge and quality....dont want to ruin the device obviously for a just a little more run time.

If so will they charge ok in the TN270 charger that provape sells?

Thanks! ]]> ProVape evolv3 http://www.e-cigarette-forum.com/forum/provape/418736-recommended-18650-batteries.html Official - New Provari Red and Chrome http://www.e-cigarette-forum.com/forum/provape/416849-official-new-provari-red-chrome.html Mon, 13 May 2013 19:19:49 GMT Just saw these two announcements from Provari and thought I'd share. The Red (well, not exactly red as it has a soft terracotta/clay-like tint to it), is a limited edition, while the Chrome one looks like it's going to be offered among the other regular colors.

Provap-1-2_1.jpgProvap-1-2_2.jpg
Attached Images
]]> ProVape Mistsmok3 http://www.e-cigarette-forum.com/forum/provape/416849-official-new-provari-red-chrome.html Double button press http://www.e-cigarette-forum.com/forum/provape/416534-double-button-press.html Sun, 12 May 2013 20:07:48 GMT I've had my new Provari Mini for just over a week now and I still find myself making frequent adjustments based on my tastes at the moment. One thing that's been bugging me is that a lot of time when pressing the button it registers as two button presses. I thought that over time I would find just the right way to press the button but I simply haven't come up with a way to press it that always gives me the one press I want. This makes navigating the simple menu options and making small adjustments pretty hard as it's very inconsistent.

Has anyone else had a button issue like this? It seems to register a double press about 1/5 of the time. ]]> ProVape cpomeray http://www.e-cigarette-forum.com/forum/provape/416534-double-button-press.html Alcohol Bath Killed my Provari http://www.e-cigarette-forum.com/forum/provape/415763-alcohol-bath-killed-my-provari.html Fri, 10 May 2013 14:57:28 GMT I have had my Provari V1 for 2 years without a single problem. Last night I decided to give it an alcohol bath. I poured a little 92% isopropyl in,... I have had my Provari V1 for 2 years without a single problem. Last night I decided to give it an alcohol bath. I poured a little 92% isopropyl in, swished it around, dumped it and dried it out over night. This morning, popped a battery in and......Nada, Zilch! Guess I have to send it in for repair. :facepalm: ]]> ProVape TheGreekTitan http://www.e-cigarette-forum.com/forum/provape/415763-alcohol-bath-killed-my-provari.html Red Provari...I recived this e-mail from the ECF..... http://www.e-cigarette-forum.com/forum/provape/415698-red-provari-i-recived-e-mail-ecf.html Fri, 10 May 2013 08:36:56 GMT Win the new Provape Provari Red in the ECF Supporting Members Draw Image:... Win the new Provape Provari Red in the ECF Supporting Members Draw
This month we're giving a lucky Supporting Member the chance to be one of the first people in the world to get hold of a brand new Provari Red, along with a bundle of accessories.

All you need to do for a chance to win, along with receiving a host of other exclusive benefits, is sign up to become a Supporting Member over at ECF.

Is it true that Provape is going to make a Red Provari? ]]> ProVape Riverboat http://www.e-cigarette-forum.com/forum/provape/415698-red-provari-i-recived-e-mail-ecf.html Ahhh.. the POWER of nagging http://www.e-cigarette-forum.com/forum/provape/414244-ahhh-power-nagging.html Tue, 07 May 2013 00:19:21 GMT Posted in wrong location...sorry Posted in wrong location...sorry ]]> ProVape EagleTa2 http://www.e-cigarette-forum.com/forum/provape/414244-ahhh-power-nagging.html My mini has stopped working http://www.e-cigarette-forum.com/forum/provape/414196-my-mini-has-stopped-working.html Mon, 06 May 2013 22:24:11 GMT I'm posting this to see if there is a home fix before I send it back to Pro Vape. Last week my mini quit functioning completely. The button would flash when inserting a battery, but the menu would not come up nor would the device fire. I cleaned the contact pin and battery button with 91% alcohol. Still wouldn't fire and the menu wouldn't come up. Hmmm..... so I poured a small bit of the alcohol into the device, swirled it around a few times, dumped it and let it dry out. Perfect! Worked great for about 2 days, and then started with the same issues. So, I cleaned it out again and let it dry out. Worked great when I tested it and I took the battery out and put it away. Pulled it out today to use it and the same issue. Won't hit a lick at anything. Any other suggestions? I've only had it for 4 months so it's still under warranty, just didn't know if there was something I was overlooking. ]]> ProVape house mouse http://www.e-cigarette-forum.com/forum/provape/414196-my-mini-has-stopped-working.html broken LED... http://www.e-cigarette-forum.com/forum/provape/412929-broken-led.html Fri, 03 May 2013 04:37:50 GMT I have a new provari 2.5 that I received a week ago and decided to powder coat green... low and behold soon as I put it back together half the LED is... I have a new provari 2.5 that I received a week ago and decided to powder coat green... low and behold soon as I put it back together half the LED is not working... This is the 6th one I have done and did nothing different (also attached a photo showing the others). Anyone know how much they will charge me to fix it. I know they won't warranty it because I took it apart to powder coat.
20130502_232509.jpg

20130502_232736.jpg
Attached Images
]]> ProVape osmo http://www.e-cigarette-forum.com/forum/provape/412929-broken-led.html Happy aniversary to me http://www.e-cigarette-forum.com/forum/provape/412778-happy-aniversary-me.html Thu, 02 May 2013 22:39:37 GMT I celebrated my first year without analogs yesterday. :toast: Could not help myself and ordered another ProVari (my second one). I am glad they... I celebrated my first year without analogs yesterday. :toast:

Could not help myself and ordered another ProVari (my second one). I am glad they have factory seconds V2 on sale just now. Good timing.

I ordered satin silver with red display. Yes, I am a bit on cheap side with it. But I own the blue led version already. I do not fancy those color tubes so satin silver was the only choice for me. Besides, I managed to drop my so far only satin silver ProVari from my chest pocket last week - it hit the edge of field shovel during the metal detecting - and the tube survived just fine without any dents. I am happy camper.

I did some research trying to find something "upgraded" for my second VV mod, but could not. Just ended at ProVari again.

Ordered yesterday and shipped today. That was fast. :thumb: :thumb: :thumb: ]]> ProVape Karlos http://www.e-cigarette-forum.com/forum/provape/412778-happy-aniversary-me.html Provari emitting faint high pitched sound http://www.e-cigarette-forum.com/forum/provape/412717-provari-emitting-faint-high-pitched-sound.html Thu, 02 May 2013 19:06:00 GMT Hello Provarinatis,

I've finally got a Provari, but I had to get it used since I didn't have the funds to get it brand new (I also understand I have no warranty). I've been using it for a couples days now and this afternoon in my very very silent office I started noticing a very faint but high pitched sound coming from the Provari when I was firing it. I tried to replicate the sound with no load on the Provari itself (took off my carto tank) and its perfectly silent. As soon as I get home I will try it with other delivery system to see if I can notice that damn sound. In any cases is that something considered "normal" since the PWM is using a high frequency? For all I know this device has never been dropped or damaged, its cosmetically perfect I'd say, and since i got my hands on it all I did was baby it and make sure to wipe my connector clean and etc. I'm kinda worried that i'd have to send it to Provape at my expenses and pay for repairs.... that would kill the sweet deal I had in the first place. So help me please you Provari Pros.

Thanks in advance ]]> ProVape Illuminatu http://www.e-cigarette-forum.com/forum/provape/412717-provari-emitting-faint-high-pitched-sound.html <![CDATA[Charger for AW IMR's]]> http://www.e-cigarette-forum.com/forum/provape/411840-charger-aw-imrs.html Tue, 30 Apr 2013 15:16:47 GMT I have a generic charger I got for my protected 18650s that I use on my Silver Bullet.
Here's the batteries-
AltSmoke.com | AW 18650 Protected 3100 mAh Rechargeable Lithium Battery | Electronic Cigarette | Ecigs |

Here's the charger-
Adjustable Battery Charger for 14500, 18650 3.7v battery

Does anyone know if this is ok to charge the AW high drains sold for the Provari by Provape?
I assume it will.
Thanks ]]> ProVape Charlie C http://www.e-cigarette-forum.com/forum/provape/411840-charger-aw-imrs.html Tank moves wiggles? http://www.e-cigarette-forum.com/forum/provape/410691-tank-moves-wiggles.html Sat, 27 Apr 2013 14:49:47 GMT Ok I need to ask this because it just doesn't seem right to me. I have 2 minis had them now a couple months the most if even that. Anyway I use carto tanks on mine. IBtanks and Iken Cartos. So I screw the tank in and use, great vape but the tank wiggles from side to side at the connector. Now the cartos are flanged and it doesn't sit flush against the top cap of the Provari. It doesn't move a lot but enough to have me worried something is wrong. Is this normal for a tank to be able to wiggle a little even though it is secure in the threads without being over tightened? I did write to provape and they said that was normal because they set the pin higher due to the many dif juice deliver devices people use on there devices. I don't know it still doesn't seem wright that the tank should move at all. Any info from fellow members would be appreciated. ]]> ProVape Tjloa http://www.e-cigarette-forum.com/forum/provape/410691-tank-moves-wiggles.html Terrific Speed! http://www.e-cigarette-forum.com/forum/provape/410021-terrific-speed.html Thu, 25 Apr 2013 23:07:04 GMT Just a quick thanks to the folks at ProVape...I placed an order for two ProVari's and a whole slew of other items 3.5 HOURS ago...and I just received the shipping notice email for everything!

Terrific! Thanks ProVape! ]]> ProVape KY_Rob http://www.e-cigarette-forum.com/forum/provape/410021-terrific-speed.html Tell me what to buy - a little help spending my $ http://www.e-cigarette-forum.com/forum/provape/408762-tell-me-what-buy-little-help-spending-my.html Tue, 23 Apr 2013 03:24:49 GMT ~*~* UPDATE EDIT: WooHoo! Purchased the standard Provari kit with an atomizer (I think I need that to be able to direct drip. If I'm wrong, show me the way. It comes with a tip of some sort, but I think that's for the cartomizer, so I may want a drip tip later? *~*~

:oops: Okay, I'm sitting on the ProVape website getting ready to buy one of these :) I'm fairly new to vaping, so I need a little help...

I work from home and I don't really expect to carry this thing around outside of the house. I have a few eGos so I have a bunch of stuff for that (LOVE my ProTanks and T3s). I'm told I need a connector to use my ProTanks but hubby says ProTanks are 510 threaded already, that's why we use the collar thingy with the eGos. True?

So... I also want to be able to drip, I can see the benefit for taste-testing. The kit I'm looking at comes with some cartomizers (never used those before, but whatever). Is that what I would use to drip or do I need to add an atomizer? I assume I need a drip tip of some sort?

Being that I work from home and it comes with 2 standard batteries, I'm thinking I'll use the standard ones and decide later if I want bigger batteries or not.

Hoping someone is hanging around tonight before I change my mind for the 10th time. LOL!

Bad part is that it looks like the kits only come in silver. I was really wanting purple, but I priced it out and it's cheaper to go with the kit. I can "Jwrap" it later :)

Thanks in advance. You guys are seriously the most helpful bunch! ]]> ProVape CandyTX http://www.e-cigarette-forum.com/forum/provape/408762-tell-me-what-buy-little-help-spending-my.html Not getting same juice taste from Provari http://www.e-cigarette-forum.com/forum/provape/408251-not-getting-same-juice-taste-provari.html Mon, 22 Apr 2013 03:00:30 GMT I recently just recieved my Provari coming from an ego c-twist. I am having a bit of an issue with juice taste, it isn't a burning taste or bad taste there just isn't really much taste at all when i am vaping from it as opposed to my e-GO. I have tried different tanks, different voltage even switched out coils anyone have an answer as to why and how i can fix it? ]]> ProVape chrisplague http://www.e-cigarette-forum.com/forum/provape/408251-not-getting-same-juice-taste-provari.html