E-Turbo ..my new invention....

[e-pipeman]

Sounds great - if you need an English beta-tester, please let me know.

And, of course - the very best of luck!

[tribalmasters]

I know what it is! Its a special computerised container that creates a vacuum around the atomiser and adds freon or whatever so the atomiser can get mega hot like a lightbulb without dying! It then complicatedly filters out the freon (or whatever) from the vapour and pumps the vapour out of its tube end!

It also has an optional attachment to revitalise atomisers! Using pulses of atomiserly theraputic electrical waves (that 901 atomisers in particular enjoy) it helps to promote a healthy balance of voltage and non-cruddyness of fibre core for your treasured atomiser!

After the electrical waves pass, 901s will enjoy bathing in the special substance, warmed gently up to 100*C where they will be boiled for a short while and then steamed and left to dry slowly for 24 hours after which they will be primed. Its then onto the painting module which repaints your atomiser in whatever colour you like. It then goes through a final diagnostic test where it burns off some of its primer liquid, is put into debug mode and given certain commands to make it behave good, rebooted and left to rest before being used again.

Please note that atomisers will eventually wear out even with this cycle. In which case, you need the atomiser new-coil and wick stuffer module wicks and coils sold seperately.

[mEtoke2]

Sounds very intriguing! We need a new device to spice things up here!

[jimldk]

Thanks all for the reponse..I will post pics soon....please be patient...it still looks very rudimentary at this stage but the idea is to divert away from traditional cigarette looks....watch this space...need to get few things done first....thanks again guys and gals....

[jimldk]

I know what it is! Its a special computerised container that creates a vacuum around the atomiser and adds freon or whatever so the atomiser can get mega hot like a lightbulb without dying! It then complicatedly filters out the freon (or whatever) from the vapour and pumps the vapour out of its tube end!

It also has an optional attachment to revitalise atomisers! Using pulses of atomiserly theraputic electrical waves (that 901 atomisers in particular enjoy) it helps to promote a healthy balance of voltage and non-cruddyness of fibre core for your treasured atomiser!

After the electrical waves pass, 901s will enjoy bathing in the special substance, warmed gently up to 100*C where they will be boiled for a short while and then steamed and left to dry slowly for 24 hours after which they will be primed. Its then onto the painting module which repaints your atomiser in whatever colour you like. It then goes through a final diagnostic test where it burns off some of its primer liquid, is put into debug mode and given certain commands to make it behave good, rebooted and left to rest before being used again.

Please note that atomisers will eventually wear out even with this cycle. In which case, you need the atomiser new-coil and wick stuffer module wicks and coils sold seperately.

Holy christ..your ideas and creativeness is way out of my league...hahahaa but nontheless something similar...but much simpler...

[madog]

Thanks all for the reponse..I will post pics soon....please be patient...it still looks very rudimentary at this stage but the idea is to divert away from traditional cigarette looks....watch this space...need to get few things done first....thanks again guys and gals....

OH I CAN'T WAIT ANY LONGER -
Whip out that digi camera and post a couple pics -

PLEASE - PLEASE

[dc2k08]

i'm on the edge of my seat jim.

[jimldk]

The picture below will show the first prototype(built yesterday)...it will look crude and primitive at this juncture of time...I am already sourcing other refinements in this current model....

Pic 1: Attached to the wires is a Atomiser(penstyle) from Njoy..Incidentally , the atomiser now performs very well with its original battery after going thru a session with the E-turbo..it has shown to be able to revive old weakened atomiser after using the atomiser with the E-turbo.....



Pic 2: it self explanatory...portability...I will try to post a picture in my hand and using it later on....

[dc2k08]

super interested in how it manages to revive bad atts jim, but perhaps you should keep that privy while you work out the patent. you are going to sell a million !

[BrazilyanGuy]

Interesting! It looks real nice but the "cigarette look" is very important for me. Why don't construct one penstyle with two atomizers one after the other?