Is your Mini a DSE901 or a RN4075?

[LuckySevens4U]

Ok, so that's what I got. So now the green one I ordered from you is it the true 901 or is it also the 4075? Thanks.

[halopunker]

Ok, so that's what I got. So now the green one I ordered from you is it the true 901 or is it also the 4075? Thanks.

I only sell 901s, I use to sell both the 4075 and the 901.

But I stuck with the 901 since the batteries/atomizers tend to last longer.

[LuckySevens4U]

Well this will be interesting for me to compare then, Rob. But either way I can mix and match my parts and be okay right?

[halopunker]

Well this will be interesting for me to compare then, Rob. But either way I can mix and match my parts and be okay right?

Yes, the parts will work. But I would probably use the DSE901 atomizer rather than the RN4075 atomizer.

The RN4075 Atomizer is more 'bridged' then the DSE901, so the 901 Will stick further into the cartridge where as the RN4075 may have issues with the 901 cartridges. (Doesnt get as much juice out of the DSE901 cartridges, in my opinion)

But it may have just been a mental thing :P Try it for yourself, I've heard stories lately that some of the newer RN4075s/DSE901s have been having issues fitting the threads of each other. But typically those are few and far between

[Houdini]

you guys are freaking me out, after reading for hours and hours i ordered a 901 last night since it seems to be the best/most reliable unit with the least amount of complaints then i read a thread like this and now i start to think i got the wrong one...augh...i just need to go and sit in a cave until the 901 arrives, i'm a smoker so i guess that make me paraniod by nature since obama is trying to take away the only plesure i still have...taxing the crap out of my smokes!

Nothing to freak out about. There is no right or wrong one. They are basically identical and all interchangeable. It doesn't matter which one you get. The only difference I've read about is the 4075 atomizer burns a little hotter and produces a little more vapor. Which means it may burn out faster but who knows. I have a couple of each and there is no huge difference between one or the other. They all fit each others battery. They all use the same carts. They all fit the USB pass and they all fit the ScrewDriver.

[halopunker]

They all fit the USB pass and they all fit the ScrewDriver.

Not all atomizers fit the USB passthrough ;P Some have issues making contact due to the threads. But typically it is rare

[LuckySevens4U]

Not all atomizers fit the USB passthrough ;P Some have issues making contact due to the threads. But typically it is rare

Well the passthrough I ordered and connected to my 4075 lit up but didn't vape. I sent it back. What's up with that?

[Houdini]

Not all atomizers fit the USB passthrough ;P Some have issues making contact due to the threads. But typically it is rare

Ok, you're right. I'll change that to all of MINE fit the USB.

[halopunker]

Well the passthrough I ordered and connected to my 4075 lit up but didn't vape. I sent it back. What's up with that?

The switches in the USB Passthrough are really sensitive, they even light up if you blow on the top casing of the battery. Similar to how the 510s operate :P

It just may have had issues making contact with the 4075, there's a tin foil trick but don't recall the link ;P

Sounds like it just didnt make a good contact Lucky. It confused me with several of mine that people claimed didnt work, but when I got them I tested em out and wallah, they worked fine. :P

[Houdini]

Well the passthrough I ordered and connected to my 4075 lit up but didn't vape. I sent it back. What's up with that?

I know exactly what's up with that. The contact point in the atomizer is not connecting with the one in the passthrough. The contact in the battery stick out a little further and is connecting with the atomizer but the center contact in the USB is not sticking out far enough to touch the one in the atomizer. A way to fix that is to use a small needle nose plyers and pull the center contact of the atomizer out very gently and not to hard. Just enough so it touchs the one in the USB when screwed together.