+ Reply to Thread
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 25
Anyone know what the jantystick is in The E-Cigarette; I remember the pic now! when's that sucker coming out??...
  1. #11
    Super Member ECF Veteran youfillintheblank's Avatar
    Join Date
    Nov 2008
    Location
    Ontario, Canada
    Posts
    927

    Default

    I remember the pic now! when's that sucker coming out??
    Cheese graters could also be marketed and sold as sponge ruiners. Think about it.

  2. Advertisement
  3. #12
    OFFICIAL STALKER OF JERRYRM ECF Veteran
    Supporting Member
    ZambucaLu's Avatar
    Join Date
    Nov 2008
    Location
    Central NY, USA
    Posts
    10,284

    Default

    Quote Originally Posted by nitewriter View Post
    I think that we need to get away from the cigarette looking devices, the ones that are painted to actually look like a cig more so than shaped like one.

    I am searching for my next device and it will be something along the lines of the Jantystick or Screwdriver. The shape won't bother me to gain the benefits. Does anyone know if they can make passthroughs for these types of devices?
    Nitewriter,

    Not sure if you would call it a passthrough, but look what Ludo says about it:

    The Jantystick can be recharged by a mini usb cable (the ones that come with mobile phones) + you can vaporize at the same time when it is charging through the USB port of your computer + you can charge the little e-cig battery with a e-cig battery charger.

    Sounds like you can vape it while plugged in so wouldn't that serve the same purpose? (fingers crossed!)

    This was taken from here:

    Janty thread - q&a

    Lu
    Last edited by ZambucaLu; 02-18-2009 at 05:22 PM.
    Hey, Upstate New Yorkers!!! Buffalo, Rochester, Syracuse, Ithaca, Binghamton, Plattsburgh, Oswego and surrounding areas, check this out:

    UpstateNYVapersClub

    Come one, come all! Visit the forum above for further details.


  4. Advertisement
  5. #13
    Super Member
    Join Date
    Jan 2009
    Location
    Rio Rancho, NM
    Posts
    483

    Default

    The JantyStick looks pretty cool, but I bet it is going to cost a pretty penny as well. Looks expensive!

  6. #14
    Ultra Member
    Join Date
    Jan 2009
    Location
    Beantown, USA
    Posts
    1,014

    Default

    Lets Hope That Janty / Joyetech Really & Fully Test Their New Great Products Before Putting Them On The Market This Time!

    I am the Proud Owner of (2) Dead Janty Dura's in the trash. RIP.....

  7. #15
    Super Member ECF Veteran
    Join Date
    Aug 2008
    Location
    In a house.
    Posts
    691

    Default

    Quote Originally Posted by Cellmeister View Post
    Lets Hope That Janty / Joyetech Really & Fully Test Their New Great Products Before Putting Them On The Market This Time!

    I am the Proud Owner of (2) Dead Janty Dura's in the trash. RIP.....
    Were you not offered replacements ?
    If not did you get your money back ?

    Where are you located ?

  8. #16
    Ultra Member
    Join Date
    Jan 2009
    Location
    Beantown, USA
    Posts
    1,014

    Default

    FYI:

    Yes, Jeff @ JantyUSA Was Great!! Jeff Sent Me Out New Batteries & New Atomizers! Got them in a few days!

    Charged Them Up & Vaped Great for Two Days Again! Then Same Frigin Issues...

    After That The Batteries Either would no longer charge, or charge and no longer put out enough voltage (measured at 3.2 volts after removing from the charger).

    I think the batteries when 1st used cooked the atomizers on all of them, I did let Jeff know about this, so he sent me new batts & atomizers.

    I got the PPC too. Does not work well, the battery connector was dirty (prior to use) as I was checking it out. Charged it up overnight. Tried it on a low battery, no charge. If you open the top cover & press on the battery when its in the charging hole you will see a connection sometimes, cleaned it off and still no good, meaning erraditc connection.

    The PPC top cover of course has to be closed for it to charge since you do not screw the battery into it. When it does work, wait about a minute or so with the cover closed and you should see a red LED come in to show its charging. The batteries I Got to charge only seemed to get half a charge, one battery after 18 hours was still charging and ended up never to be charged again.

    Overall the PPC idea is great, but it is very tinny, another RIP......

    Sorry but this is how it is. But I will say on the 1st 2 Days The Dura Kicked Vapor Like a Real Fogger, Burni'n HOT!!!

    I just hope they get squared away with their products.

    But I Can say Jeff at JantyUSA Does Provide Top Notch Service on Their products.

    I emailed him today, no response yet on the Dura-C Upgrade and I did Even Did The Pre-Order Dura when it was available. So I do have some hope they get there sh@t together with Joye.

    Duraless & Patiently Waiting..

  9. #17
    Super Member ECF Veteran
    Join Date
    Aug 2008
    Location
    In a house.
    Posts
    691

    Default

    I don't think i'll be buying a Janty anything until the model has been on the market and reviewed for a few months.
    I like the look and the description of the Stick but i'm gonna wait and see.

    @ Cellmeister. Thanks for sharing your experience with the Dura.

  10. #18
    Di
    Di is offline
    ECF Veteran ECF Veteran Di's Avatar
    Join Date
    Oct 2008
    Location
    *Australia*
    Posts
    8,872

    Default buy from the modders

    I am going to buy from the modders on this forum,

    Di ......
    ** fallen∞**

  11. #19
    Super Member ECF Veteran
    Join Date
    Nov 2008
    Location
    Mexico
    Posts
    439

    Default

    Janty is in the right track, people will slowly move from the "real thing design" as soon as they realize that get involved with something looking like a cigarette is a bad idea, too much attention on everything looking like a real cigarette or with the words "cigarette", "smoke", etc. in it, NJoy is in the right track too, trying to get into the whitelist with the goverments of many countries, this can lead into a great acceptance of "personal vaporizers" AKA e-cigarettes.

  12. #20
    Ultra Member ECF Veteran ApOsTle51's Avatar
    Join Date
    Aug 2008
    Location
    UK
    Posts
    2,123

    Default

    Janty is " on the right track" at the expense of it's own consumers.
    Moving away from cigarette style device's has been in the modders field of knowledge for a long time, nothing new there.
    Janty really should learn to field test their new super products better before releasing them for sale. even from the first kissbox release and the troubles they apparently had with that up to their latest Dura still having the same release issues.
    Janty R&D department need a kick up the ass.
    Good products let down by poor testing and rushing them onto the shelves.
    The only loosers here are those who have purchased the failing devices....

+ Reply to Thread
Page 2 of 3 FirstFirst 123 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

SEO by vBSEO