where to buy 801 manual switch

[deewal]

So if i bought a Janty Manual Switch and the Janty USB box would i be able to use them with a RN4072 Atomiser ?
I'm also confused about the photo of the USB box on the Euro Website.
It's round shaped and in the description of it in the Kissbox Classic Extended it says "1 x USB E-system (100 cm) KISS USB cable with integrated battery and connection to the e-cigarette, this is no standard USB cable!"
The description of it as a Stand alone buy at 18.95 Euros says
"With this USB-E cable you will be able to smoke when connected to the USB port of your computer or any other power outlet!" but say's nothing about an integrated battery. There is only one photo of this and it is the round one which i can't actually see how a battery would fit in it.
I thought the USB box was oblong like David Yang's.
http://www.jantyshop.com/popup_image.php?pID=233

[ZambucaLu]

Dee, that picture is a bit misleading. That is not the battery box. That must be some type of retractable device that comes with the kit, or something.....but I've never heard anyone mention it. The battery box is just like David's.....they take the same batteries. And I would say yes, you can use the RN atomizer as I have used all my atomizers on it with no problem so far.

Lu

[deewal]

Thanks Lu. I'm getting really paranoid ordering thing from people i hav'nt dealt with before as a lot of them don't have things their selling in Stock.
They still take your money though and then you don't hear anything until after a few e-mails and then they apologise for the delay and assure you you will get your order when New stock comes in. Great.

[ZambucaLu]

Thanks Lu. I'm getting really paranoid ordering thing from people i hav'nt dealt with before as a lot of them don't have things their selling in Stock.
They still take your money though and then you don't hear anything until after a few e-mails and then they apologise for the delay and assure you you will get your order when New stock comes in. Great.

Yeh, I hear ya! I'm going through that now with a juice order I placed last weekend from someone I've never ordered from before either. But I got his address and phone number, so he better put out....LOL

Lu

[Kate]

This is what the Janty USB cable actually looks like, the website picture is misleading as Lu says:

[yvilla]

Yeah, the picture is of a retractable USB cable - many USB devices do come as retractables. The benefit of course is having the cable all neatly wound up when not in use, or when you want or need variable lengths of cable for different situations.

I felt kind of cheated when I received my Janty USB battery, because I thought from the picture that I would be getting the retractable cable!

[rmasu]

I dont mind taking apart an 801 battery and re soldering the leads directly to the end cap to by pass the air pressure switch, I've already spliced up an old usb cable and soldered it to an old battery plate to make a homemade usb power supply, works great. I've put a momentary button inine with the usb cable and it works good for a hacked manual switch, but something more ergonomic on the pen itself would be great.
Thanks


I am pretty handy with wires and solder. So... any place to just buy a switch for an 801 that can work with a modded battery?

Doc

[yvilla]

I am pretty handy with wires and solder. So... any place to just buy a switch for an 801 that can work with a modded battery?
Doc

Here's the problem: The manual switch Janty sells has atomizer connection threads that fit an 801 or 4072 penstyle atomizer just fine.

But, the battery connection threads of the switch are made to fit their USB battery, and don't fit the regular 801 or 4072 battery threads! Can't say for sure, but I imagine you'd find the same problem with David Yang's manual switch. So for sure with the Janty one, looks like you'd be stuck going with their USB battery too if you want the switch.

[yvilla]

Sorry, double post.

[rmasu]

Here's the problem: The manual switch Janty sells has atomizer connection threads that fit an 801 or 4072 penstyle atomizer just fine.

But, the battery connection threads of the switch are made to fit their USB battery, and don't fit the regular 801 or 4072 battery threads! Can't say for sure, but I imagine you'd find the same problem with David Yang's manual switch. So for sure with the Janty one, looks like you'd be stuck going with their USB battery too if you want the switch.

You are so right yvilla, I have the kissbbox and the 801 atomizer fits the kissbox manual switch but the batteries are not compatiable, so... I guess I should be specific, where can I get a switch for the 801 (non Kiss box) that will work with the 801, I guess I'm making a KB clone. Can I buy the switch as a stand alone?