Cloud chasing - Page 2
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
Like Tree1Likes

Thread: Cloud chasing

  1. #11
    Super Member ECF Veteran
    Join Date
    May 2013
    Location
    Denmark
    Posts
    874

    Default

    Quote Originally Posted by D. Waterhouse View Post
    Your battery looks good. Remember, check the ohms of your build be fore you put it on your battery device, just because you metered your coil doesn't necessarily mean it will be that ohm reading when installed in your RBA/RDA.

    OK, safety out of the way.

    I run a .8 micro coil on an Igo S w/ 26AWG Kanthal and cotton ball wick. I'm looking to get a set of Sonys to run Dual 1ohms in an Igo W but moneys squeaky tight right now so maybe for christmas?
    I dont even bother doing a read untill the coil is in the rda... I dont want to think yay its .7 and end up with a kaboom... I know with what i use to wrap with every wrap is 0.1 ohm so i just give it 7-10 wraps and it reads 8-11


    Sent from my iPhone using Tapatalk - now Free

  2. #12
    Super Member ECF Veteran
    Join Date
    May 2013
    Location
    Denmark
    Posts
    874

    Default Cloud chasing

    And i just remembered that my "local" store has some sony batteries that they actually dont know what is... But they look like US18650VTC3 as i remember them...

  3. #13
    Ultra Member Verified Member
    ECF Veteran
    Supporting Member
    Vwls's Avatar
    Join Date
    Jun 2013
    Location
    AZ
    Posts
    1,572

    Default

    Couple things I am looking at - maybe you will benefit. Also have questions to add.

    Batteries: Sony SE US18650VTC3 1600mAh 30A (18.75C)
    RDA: EXCLUSIVE PRICE: The ATOMIC RDA by MCV PHILIPPINES | VAPEHAPPYVAPEHAPPY Just watched the review on this and it looks sweet. No modding/drilling needed (clouds are all about air control).
    Juice: order some 6 or 3 mg nic... things are about to get crazy.
    Wicking material: Anything better (healthier) than silica for sub-ohming? Cotton won't work, right?
    Mod: What can I put in my mechanical with this battery to safeguard this process? Kick 2? Another device?
    Wire: Would flat or ribbon wire work better (cover more surface area) than round?
    ♥❄♥ .* ♡♥ ❇ ★ ♡♥ ☆ `*. ♥❄♥ *♡ ♥❄♥.*

  4. #14
    Full Member Verified Member
    Join Date
    Oct 2013
    Location
    Us
    Posts
    22

    Default

    I'm pretty new to vaping I just want to keep getting a better vape recently built a dual coil on a trident cotton wick efest batteries at .6 ohm and wow I blow some clouds it's pretty delish as well but dripping is a bummer

  5. #15
    Full Member Verified Member xSKOOBSx's Avatar
    Join Date
    Feb 2014
    Location
    United States
    Posts
    55

    Default

    Quote Originally Posted by Dusif View Post
    I dont even bother doing a read untill the coil is in the rda... I dont want to think yay its .7 and end up with a kaboom... I know with what i use to wrap with every wrap is 0.1 ohm so i just give it 7-10 wraps and it reads 8-11
    I always thought half the reason you ohm out every build is to check for shorts. those are problematic.

    and you can kind of tell if something is amiss after you have been building a while. you know what resistance to expect for a coil, and if the build is reading differently, either higher or lower, you need to check for shorts, loose connections, etc.

    edit: oops, thread necro. stumble on a thread doing a search, reply, realize thread is old. my bad.

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks