RBA's that will fit the Innokin itaste VTR...
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
Like Tree2Likes

Thread: RBA's that will fit the Innokin itaste VTR...

  1. #1
    Super Member ECF Veteran
    Join Date
    Apr 2009
    Location
    West Chester, PA USA
    Posts
    407

    Default RBA's that will fit the Innokin itaste VTR...

    I've been doing a lot of research about the Innokin itaste VTR and close to pulling the trigger to purchasing it. I know that there are limitations with RBA's fitting it unless you use the adapter. I was wondering if you fellow vapor enthusiasts would help me compile a list of all the 19mm RBA's that would fit flush with the unit. Thanks in advance.

  2. #2
    Senior Member SpettroJoe's Avatar
    Join Date
    Nov 2013
    Location
    Carthage, Mo
    Posts
    252

    Default

    hmm, well i cant think of any that i have that will fit. there are some dripping ones that are really small but for ones like the steam turbine, kayfun etc none are 19mm

  3. #3
    Super Member Verified Member
    ECF Veteran
    djtonyb's Avatar
    Join Date
    Mar 2010
    Location
    Big Pine Key
    Posts
    796

  4. #4
    Super Member ECF Veteran
    Join Date
    Apr 2009
    Location
    West Chester, PA USA
    Posts
    407

    Default

    I saw that thread, thanks for reminding me, but unfortunately, it seems as though it hasn't been updated in some time.

  5. #5
    Super Member Verified Member
    ECF Veteran
    djtonyb's Avatar
    Join Date
    Mar 2010
    Location
    Big Pine Key
    Posts
    796

    Default

    RatInDaHat has a live Google Doc with collected info:

    https://docs.google.com/spreadsheet/...=sharing#gid=0
    mrmoto likes this.

  6. #6
    Super Member ECF Veteran
    Join Date
    Apr 2009
    Location
    West Chester, PA USA
    Posts
    407

    Default

    Thanks for the google docs... I also see that The COBRA Genesis SS MESH Rebuildable Atomizer Tank will also fit...and the price is forgiving.

    COBRA Genesis SS MESH Rebuildable Atomizer Tank -Stainless 3.5ml [gv-CobraGenesisSSStainless-3.5ml] - $23.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more

  7. #7
    Full Member
    Join Date
    Jan 2013
    Location
    Charlotte, North Carolina, United States
    Posts
    16

    Default

    Quote Originally Posted by djtonyb View Post
    RatInDaHat has a live Google Doc with collected info:

    https://docs.google.com/spreadsheet/...=sharing#gid=0

    Nice! - thanks for this link. I've got my eye on that $25 Taifun GS clone at FT.

  8. #8
    Full Member tRu3_sKiTz0's Avatar
    Join Date
    Mar 2014
    Location
    Seminole County, Lake Mary, FL, USA, 32746
    Posts
    37

    Default

    One genesis that is not listed on either the google doc or the afore mentioned post is the Hydra Titanium v2.1. I received mine a couple weeks ago and dimensions are close to that of a protank 2/3. I started with a Chobra until I became proficient in rolling mesh and wrapping coils. The wick hole on the chobra is smaller than the Hydra so it did take a bit of trial and error to figure out the best roll/wrap for the Hydra but I can confirm that it not only fits but also looks quite nice in the VTR. After a lot of experimentation I have discovered that although the VTR will fires sub ohms the chip doesn't like them very much and will take time to fire. I am currently using 30g kanthal 7/6 micro coil(which was kind of a PITA to wrap) producing 2 to 2.2 ohm and fires just as quickly as any "plug and play" type tank I have tried. #500 mesh at 2.3mm wide fits just right in the 2.4mm wick hole and wicks perfectly. If you are looking for the perfect RBA for the VTR, the Hydra is where it's at for me. Just make sure you wrapping 2ohm coils to ensure the best performance for the VTR.

    EDIT: Adding a photo for confirmation...



    Sent from my XT894 using Tapatalk
    Last edited by tRu3_sKiTz0; 03-31-2014 at 06:30 PM.

  9. #9
    Super Member Verified Member
    ECF Veteran
    Taylor7617's Avatar
    Join Date
    Aug 2013
    Location
    Humble, Texas, United States
    Posts
    419

    Default

    tRu3 - Now that's a nice looking setup on the VTR.
    tRu3_sKiTz0 likes this.

  10. #10
    Super Member Verified Member
    ECF Veteran
    Supporting Member

    Join Date
    May 2013
    Location
    Middle East
    Posts
    764

    Default

    The Taifun GS really is perfect on the VTR. It's a wonderful little guy.

Page 1 of 2 12 LastLast

Bookmarks