Kanger problems.
Results 1 to 4 of 4

Thread: Kanger problems.

  1. #1
    Full Member
    Join Date
    Oct 2013
    Location
    Pennsylvania
    Posts
    128

    Default Kanger problems.

    Alright, so I got a kanger protank2 3 days ago, and I know, I'm a little late to the party.
    When I first used the thing, it was awesome. It vaped well, was nice and smooth, and had a cooler hit than the vivi nova's I've grown so attached to.
    But now, it's nothing but issues. Second day. Gurgling, flooding, and a mess of juice everywhere.
    I replaced the flavor wicks with cotton, hoping they'd plug those holes better and get rid of the vaccum effect.
    It worked, but only temporary.
    Rebuilt the coil, added more flavor wicks. Fixed. Vape some more, and if you're like me and use cotton, you change coils and wicks with each flavor.
    So, now I go to rebuild the coil a second time, and I keep getting 0.0-0.4 ohm readings. I have no idea why. I'm not doing anything different this time as compared to the first time. Why is this happening?



  2. #2
    PV Master Verified Member
    ECF Veteran
    crxess's Avatar
    Join Date
    Sep 2012
    Location
    Williamsport Md
    Posts
    8,407
    Blog Entries
    3

    Default

    + wire touching in the tube.
    Possibly legs touching(crossing)

    I normally set my coil with a tiny screwdriver through the center - leaving it in place until fully mounted. Pull tightly on the legs and fold out to keep in position while installing Grommet and pin.

    Leaking//gurgling:
    To much Vacuum when Vaping
    Storing Vertical when not in use
    Storing with tank below 1/2 full
    Power to low - not vaporizing all the e-liquid delivered to coil.
    Smoke free since 08/06/12 for my loving Wife, our Children and Grand Children
    Someone has to pay the bills - lol


  3. #3
    Full Member
    Join Date
    Oct 2013
    Location
    Pennsylvania
    Posts
    128

    Default Kanger problems.

    Quote Originally Posted by crxess View Post
    + wire touching in the tube.
    Possibly legs touching(crossing)

    I normally set my coil with a tiny screwdriver through the center - leaving it in place until fully mounted. Pull tightly on the legs and fold out to keep in position while installing Grommet and pin.

    Leaking//gurgling:
    To much Vacuum when Vaping
    Storing Vertical when not in use
    Storing with tank below 1/2 full
    Power to low - not vaporizing all the e-liquid delivered to coil.
    Thanks for the help! I had fixed the leaking and gurgling issue by taking note to all those things, and adding some cotton!
    I just fixed the short problem too. I guess the ends of the wires that ground and connect to the firing pin have to be tucked into the gasket and pin area or it can cause some complications.
    These things are a lot more finicky than the vivi nova tanks haha :P



  4. #4
    Full Member
    Join Date
    Dec 2013
    Location
    Columbia SC, USA
    Posts
    16

    Default

    What would I look for If I wanted to rebuild my coils instead of buying new ones? and location for buying them?

Bookmarks