Best atomizer to use with the eGo/Tornado
Page 1 of 4 1234 LastLast
Results 1 to 10 of 38

Thread: Best atomizer to use with the eGo/Tornado

  1. #1
    Full Member ECF Veteran
    Join Date
    Mar 2010
    Location
    Enterprise, Alabama, United States
    Posts
    95

    Default Best atomizer to use with the eGo/Tornado

    I got lucky and got an order in with Dietsmokes late last night for an eGo. Just checked my e-mail and found out they shipped it today and it should be here by Wednesday. It only comes with one atty though so I wanted to have a few extra on hand, in case anything goes wrong with that one I don't want to be waiting in limbo.

    I've been reading about the LR atty's and that they almost turn a 3.7V mod into a 5V one. I was just wondering how these stack up against the eGo atty's. Janty's out of those right now but I did notice they were more expensive, individually, than the LR ones I found a link to on here last night. I also noticed Janty sells a cheaper eGo atty, the TAWA atty, which Janty says is the same product but doesn't come with the same 6 month warranty the regular one comes with.

    It seems like there are plenty of eGo vapers around here. Which atty have you found works the best with it?

  2. #2
    Supplier Associate ECF Veteran ImYourSalt's Avatar
    Join Date
    Jun 2009
    Location
    San Diego, CA
    Posts
    2,431

    Default

    i would love the answers to these questions.

    *subscribed*
    Liberty-Flights.com | Quality Electronic Cigarettes and E-Liquid

  3. #3
    Senior Member ECF Veteran
    Join Date
    Feb 2010
    Location
    Eastern WV
    Posts
    163

    Default

    The eGo/Tornado just uses a 510 atty. If Janty is out, order from another vendor. Almost all carry them.

  4. #4
    Inactive Supplier ECF Veteran
    Join Date
    Sep 2008
    Location
    Southern California USA
    Posts
    1,675

    Default

    Also you should order BE-510s or the other 510 clones, NOT Joye 510 atomizers. These atomizers are designed for higher voltages.
    Quote Originally Posted by Hammond Egger View Post
    The eGo/Tornado just uses a 510 atty. If Janty is out, order from another vendor. Almost all carry them.

  5. #5
    Full Member ECF Veteran
    Join Date
    Mar 2010
    Location
    Enterprise, Alabama, United States
    Posts
    95

    Default

    Quote Originally Posted by Hammond Egger View Post
    The eGo/Tornado just uses a 510 atty. If Janty is out, order from another vendor. Almost all carry them.
    Yeah, I get that the eGo uses a 510 atty, and that any old standard 510 atty will work with the eGo, but everything I've read about the Janty eGo atomizer says that it works much better with the eGo than the standard 510 atty does. Also, it sells for more than $15 a piece on Janty's website, which also says that the reason they've been out of stock for so long on the eGo's is because they haven't been able to get in eGo atty's in stock, so I have a hard time imaging that it's your standard JOYE 510 atomizer that comes with it.

  6. #6
    Full Member ECF Veteran
    Join Date
    Mar 2010
    Location
    Enterprise, Alabama, United States
    Posts
    95

    Default

    Quote Originally Posted by gashin View Post
    Also you should order BE-510s or the other 510 clones, NOT Joye 510 atomizers. These atomizers are designed for higher voltages.
    Yeah, that's kind of what I was getting at. I don't know the right way to say it but I know that I've read there's high voltage atomizers (made to handle the higher voltage mods) and that there's low resistance atomizers which can allow you to vape at close to 5V with a 3.7V mod. Since the eGo caps out at 3.7V, this was the way I was most definitely leaning in, just wanted to hear if anybody had any experience with any of these HV or LR atty's on the eGo and how they stack up compared to the one that originally comes with the starter kit and can be bought on Janty's site when in stock.

    Like I said, I'm probably not phrasing any of this right, but I'd love to know which atty most people enjoy using with the eGo.

  7. #7
    PV Master ECF Veteran Drozd's Avatar
    Join Date
    Nov 2009
    Location
    NW Ohio
    Posts
    4,156

    Default

    Quote Originally Posted by gashin View Post
    Also you should order BE-510s or the other 510 clones, NOT Joye 510 atomizers. These atomizers are designed for higher voltages.
    nooo that's a bad bit of advice.... the eGo battery actually is about 3.1V ...the clone atties have higher resistance than the standard 2.3Ω.. the clones are at a resistance of around 3.2Ω...

    I would go with one of the low resistance atties that are at 1.5Ω..or even the standard genuine joye 510... the LR atties are real nice on the eGo and do produce much more and a much warmer vape..I have some that I'm using on my eGo..

    Current PVs: Precise Plus 18650 10/7/11, Super6 3/13/10, eGo 1/23/10 (shelved)...

  8. #8
    Full Member
    Join Date
    Mar 2010
    Location
    Ontario, Canada
    Posts
    73

    Default

    I ordered my eGo from Jack at Happy Vaper and was able to order an extra atomizer for $13 canadian. Not sure if that helps as I don't know where you are located, but for me in Canada, it was a good deal.

  9. #9
    PV Master ECF Veteran
    Join Date
    Sep 2009
    Location
    Okauchee Lake, WI
    Posts
    3,610

    Default

    Quote Originally Posted by gashin View Post
    Also you should order BE-510s or the other 510 clones, NOT Joye 510 atomizers. These atomizers are designed for higher voltages.
    As Drozd already mentioned... that's really bad advice. The last thing that you want to do is put a high resistance, "high voltage" atomizer on the eGo/Tornado. If anything, go for a low resistance atomizer.

    I think new eGo/Tornado users will be happy with the traditional Joey (true Joye) 510 atomizer.. available from many sources.

    If the vapor "just isn't getting you there".... even with the cone on.. then you might want to consider one of the 1.5Ω or 1.6Ω 510-equivalent atomizers available from Drew at NHaler.

    I'm still evaluating that combo.... so I'm hesitant to say much more.

  10. #10
    PV Master ECF Veteran
    Join Date
    Sep 2009
    Location
    Okauchee Lake, WI
    Posts
    3,610

    Default

    Quote Originally Posted by Lola69 View Post
    I ordered my eGo from Jack at Happy Vaper and was able to order an extra atomizer for $13 canadian. Not sure if that helps as I don't know where you are located, but for me in Canada, it was a good deal.
    Lola....

    For the sake of my own sanity I'm hoping that's your real name and not a reference to a Kinks song....

Page 1 of 4 1234 LastLast

Tags for this Thread