GG Genesis Style Atty

**Vaypor_Phi** · 06-08-2012, 07:09 PM

Imeo, do you see any genesis style atomizers in the near future for the GG line? A genesis atomizer with your influence would be one of a kind. If you did make one, I know people would flock to your creation. You mentioned that you did not have much luck with SS mesh wicks, and you get a lot of arcing in another thread.

I used to get frustrated working with SS mesh as well, but a good friend of mine introduced me to using 30AWG Kanthal A, and it's almost like cheating when making coils with SS mesh. The heating wire is thick enough that it's very forgiving with the arcing. If it arcs, just a little adjustment or wiggle to the wick and everything is good.

The genesis atomizer seems to be at a stand still with the creativity put into it at the moment, but I know if there was a GG version, it would raise the bar.

We need your creativity and influence in this area..

**imeothanasis** · 06-08-2012, 09:52 PM

I think that Ody already works with mesh vapor. Have you read about Mrkrinkle's method?

**Tgoode** · 06-09-2012, 02:09 AM

I have been using stainless with 30 ga kanthal in my Ody off and on for a couple months. Works very well indeed with the Krinkle method.

I've also been using 28 ga silver for the nr wire.

**Setzer** · 06-09-2012, 02:31 AM

I had mine running ss mesh without any fg wick involved and it worked well at the start and then I had flooding issues but I ultimately went back a couple of days ago to the fg wick as I just preferred the taste.

Its hard to explain but I found the mesh wick to give a very "hard" taste where the fg seems more mellow. That could be down to the juice Im using at the minute which is a mellow and delicate smokey homemade juice so I guess that a different juice may suit the ss mesh wick better.

The first night with the mesh wick the Ody was going absolutely great but the next few days I was having trouble getting a balance with the juice control but after a bit of time Im sure I would have had that sorted but I just preferred the taste of my juice with the fg wick.

Have a go with the ss mesh in your Ody, its really very easy to do.

**Vaypor_Phi** · 06-09-2012, 07:12 PM

Originally Posted by imeothanasis

I think that Ody already works with mesh vapor. Have you read about Mrkrinkle's method?

Imeo, the Ody does work with SS mesh, but it could very much so be improved for SS mesh. Using Mr. Krinkles method works, but with the nr wire resting below the wick causes gaps where juice leaks through and causes flooding gurgling.

Using that method does work well when it does work, but I find that method to have problems with feeding properly often.

If you could design an atty made for SS mesh, I'm certain many of the GG family would greatly appreciate your efforts.

Thank you.

**dspin** · 06-10-2012, 06:30 PM

I will agree with Vaypor Phi - using a little piece of mesh in the Odys in not the same as running a true genisis atomizer. A dedicated genisis atomizer - if you are so inclined would be an awesome addition some day to the GG Line - IMO.

**Poppa D** · 06-10-2012, 06:47 PM

Can't imagine the flack Imeo would endure if he did this.

**dspin** · 06-10-2012, 07:09 PM

Ah but thats the beauty of being human - we all can change our minds at anytime if we so desire. Perhaps with the wealth of more information out there Imeo may decide to think about it again someday. Hopefully he does.

As far as flack goes - he has his GG forum friends to stand behind him.