Page 15 of 279 FirstFirst ... 51112131415161718192565115 ... LastLast
Results 141 to 150 of 2788
Like Tree9433Likes

Thread: Ikenvapers Chat (the door is open for EVERYBODY! Come on in.)

  1. #141
    PV Master Verified Member
    Join Date
    Nov 2013
    Location
    Montana
    Posts
    3,597
    Blog Entries
    1

    Default

    Morning miss Fran, looking lovely as always

    Performance-wise, it's hard to believe these Platinums are from the same place as the Fusions I tried. They work great... except... I have quickly learned that I cannot live without the flange. Even being ultra careful, I lost a few drips of juice after filling the tank, which is likely a skill I could master with some practice. The bigger problem was when I was out this morning the tank wouldn't stay put. I pinched off the airflow a few times, then the tank came up & I almost lost my drip tip, probably because I had it slightly too high to not pinch off the airflow again.

    The actual vaping performance is remarkable though. They'll definitely be appreciated on the tanks that stay at home, but I'm going to have to swap the one back out of my daily morning drive tank with something that has a flange on it.

    Since the only Fusions I've got so far were from the bad batch, are they supposed to have the same size punched holes as the Platinums do? The bad batch ones were tiny, less than half the size of the Platinums.
    Iken, Bovinia and FranC like this.

  2. #142
    Registered Supplier ECF Veteran Wharf Rat's Avatar
    Join Date
    Aug 2010
    Location
    Fresno, Ca
    Posts
    7,776

    Default

    It's Football time !!!
    Iken, 5cardstud, Bovinia and 2 others like this.

  3. #143
    Ascended To A Higher Plane Verified Member
    ECF Veteran
    Supporting Member
    FranC's Avatar
    Join Date
    Oct 2010
    Location
    New Hampshire
    Posts
    69,282

    Default

    Iken, 5cardstud and Bovinia like this.

  4. #144
    ECF Guru (Fusionman) Team ECF (folding@home)
    Verified Member
    ECF Veteran
    Supporting Member
    5cardstud's Avatar
    Join Date
    Jan 2010
    Location
    Fusionmans Cave, WA.
    Posts
    16,934

    Default

    Quote Originally Posted by Wharf Rat View Post
    It's Football time !!!
    You mean it's Seahawks time don't you? After all they are the 2014 definition of football.

    I better shut up or Wharf will black my other eye.
    Last edited by 5cardstud; 01-12-2014 at 04:43 AM.
    Iken, Bovinia, Wharf Rat and 2 others like this.

    To handle yourself, use your head; To handle others, use your heart.

  5. #145
    Ascended To A Higher Plane Verified Member
    ECF Veteran
    Supporting Member
    FranC's Avatar
    Join Date
    Oct 2010
    Location
    New Hampshire
    Posts
    69,282

    Default

    Good morning,folks
    Iken and Bovinia like this.

  6. #146
    Senior Member Verified Member DJLEC's Avatar
    Join Date
    Nov 2013
    Location
    Union City, California
    Posts
    275

    Default

    Quote Originally Posted by Ozwald View Post
    Performance-wise, it's hard to believe these Platinums are from the same place as the Fusions I tried. They work great... except... I have quickly learned that I cannot live without the flange... snip ... Since the only Fusions I've got so far were from the bad batch, are they supposed to have the same size punched holes as the Platinums do? The bad batch ones were tiny, less than half the size of the Platinums.
    Can you elaborate on how to identify the Bad Batch Fusions since I have been trying when available to build a little stash of the SR Mega Fusion Punch - 3 Ohm.

    I have not tried these yet but I did try a LR Mega Platinum S yesterday with a new Tank and the 1st one was DOA which surprised me. After replacing it I was very impressed but I agree since I also prefer a Flange. I will send a note to Isaac about the DOA since I am anxious to build my stash a little further when he gets more of the Fusion Flanged in.
    Last edited by DJLEC; 01-12-2014 at 12:46 PM.
    Bovinia likes this.

  7. #147
    ECF Guru (Fusionman) Team ECF (folding@home)
    Verified Member
    ECF Veteran
    Supporting Member
    5cardstud's Avatar
    Join Date
    Jan 2010
    Location
    Fusionmans Cave, WA.
    Posts
    16,934

    Default

    Quote Originally Posted by DJLEC View Post
    Can you elaborate on how to identify the Bad Batch Fusions since I have been trying when available to build a little stash of the SR Mega Fusion Punch - 3 Ohm.

    I have not tried these yet but I did try a LR Mega Platinum S yesterday with a new Tank and the 1st one was DOA which surprised me. After replacing it I was very impressed but I agree since I also prefer a Flange. I will send a note to Isaac about the DOA since I am anxious to build my stash a little further when he gets more of the Fusion Flanged in.
    Like I said in an earlier post I have 10 510 Punced SR Mega Fusions from before the bad batch that I'm not going to use that I'll let go.
    Iken and Bovinia like this.

    To handle yourself, use your head; To handle others, use your heart.

  8. #148
    PV Master Verified Member
    Join Date
    Nov 2013
    Location
    Montana
    Posts
    3,597
    Blog Entries
    1

    Default

    Quote Originally Posted by DJLEC View Post
    Can you elaborate on how to identify the Bad Batch Fusions
    Email Isaac. Include your order number to make it a little easier for him.
    Iken, Bovinia and DJLEC like this.

  9. #149
    Senior Member Verified Member DJLEC's Avatar
    Join Date
    Nov 2013
    Location
    Union City, California
    Posts
    275

    Default

    Quote Originally Posted by 5cardstud View Post
    Like I said in an earlier post I have 10 510 Punced SR Mega Fusions from before the bad batch that I'm not going to use that I'll let go.
    Sent you a PM if they are SR Mega Fusion Punch - 3 Ohm I would be interested.
    Bovinia likes this.

  10. #150
    Senior Member Verified Member DJLEC's Avatar
    Join Date
    Nov 2013
    Location
    Union City, California
    Posts
    275

    Default

    Quote Originally Posted by Ozwald View Post
    Email Isaac. Include your order number to make it a little easier for him.
    Thank you - This was done.
    Bovinia likes this.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •