510 usage and maintenance instructions from Joye Technology

[olderthandirt]

Hey denec, I like to top the cart just so it's moist at the top. Just barely. Then 2 drops right on the bridge. Vapes real well

[denec]

Originally Posted by olderthandirt

Hey denec, I like to top the cart just so it's moist at the top. Just barely. Then 2 drops right on the bridge. Vapes real well

gotcha thanks!

[RsL]

Originally Posted by denec

Yeah that makes sense!

I wait until the atomizer does not feel hot and then pull again usually about 20 seconds before each pull


One more question..I keep reading about using the method of dripping..which is one of the big plus of the 510 because we do not have to worry about burning out the battery, but the part i do not understand is after you put the 1-2 drops on the atomizer is do we just replace the cartridge on top of it with the filling in it? and then pull?

i looked all over the forums and only thing i can find is people say to put the original cap on, i have no idea what that means?

If we do not put back the cartridge in how else do we pull?

so the cartridge has to be empty before we can drip right?

What you have probably read is how some people just drip a couple or 3 drops directly on the atomizer and then put on the original cap which has no filling in it. When a person does this they are simply vaping off the juice which has absorbed onto the atomizer. Sure you can do this, but as Olderthandirt said, just drip on the atomizer and then top off your cart and vape away!

[denec]

Originally Posted by RsL

What you have probably read is how some people just drip a couple or 3 drops directly on the atomizer and then put on the original cap which has no filling in it. When a person does this they are simply vaping off the juice which has absorbed onto the atomizer. Sure you can do this, but as Olderthandirt said, just drip on the atomizer and then top off your cart and vape away!

I am going to do the way olderthandirt said but i still not sure what you talking about

then put on the original cap which has no filling in it.

this is the part that really confuses me lets say i wanted to try it that way in case i got a new flavor i dont know how about doing it for curioisty

I dont have an original cap? i dont remember seeing an original cap anywhere? I got mine from Widow bead work set...and there was no cap anyway except that went on the end of the cartridge itself which was little plastic covering but i took that off before inserting the cartridge into the atomizer. I am assuming that cnanot be it becuase where would i put that?


unless i am having a total mindfreeze...otherwise i will just go with the plan above and just put a fw drops in the cartrtidge and then 1-2 drops in the atomizer

[rsngfrce]

Originally Posted by denec

this is the part that really confuses me lets say i wanted to try it that way in case i got a new flavor i dont know how about doing it for curioisty

I dont have an original cap? i dont remember seeing an original cap anywhere? I got mine from Widow bead work set...and there was no cap anyway except that went on the end of the cartridge itself which was little plastic covering but i took that off before inserting the cartridge into the atomizer. I am assuming that cnanot be it becuase where would i put that?

Cap = cartridge...

[denec]

Originally Posted by rsngfrce

Cap = cartridge...

duh makes sense now thanks! =)

[denec]

can someone tell me what is purified alcohol?

i now that sounds silly but i never heard of it before?

where can i get it? i think my atomizer is getting gunked up becuase now after 2 days i am having a harder time getting a good draw it use to be a lot easier now i have to draw a lot harder

[ceejay]

Originally Posted by denec

can someone tell me what is purified alcohol?

i now that sounds silly but i never heard of it before?

where can i get it? i think my atomizer is getting gunked up becuase now after 2 days i am having a harder time getting a good draw it use to be a lot easier now i have to draw a lot harder

isopropyl rubbing alcohol. you can get it at any local drug store

[denec]

Originally Posted by ceejay

isopropyl rubbing alcohol. you can get it at any local drug store

there are two types one that is 70% and one that is 99% which is better?



I have used rubbing alcohol before the one with 99% to clean thermal paste off of my cpu...I just was not sure if it better to use?

Will it not leave some sort of aftertaste in there?

[ceejay]

Originally Posted by denec

there are two types one that is 70% and one that is 99% which is better?



I have used rubbing alcohol before the one with 99% to clean thermal paste off of my cpu...I just was not sure if it better to use?

Will it not leave some sort of aftertaste in there?

doesn't matter which one you use i think. but 99% might work better since it's a higher %. you rinse it with water after you soak it. doesn't leave any aftertaste