KR808D Battery Adapters - Sources and Vendors in Model Specific Discussion; A thread for Availability of Adapters for KR808D Cartomizers to Various Batteries -
and for KR808D Batteries to other Models ...
-
-
-
Okay, I'll start - so first question...
Anybody know of sources for KR808D cartomizer to 510 battery adapters??
All I seem to be able to find are the reverse... but I have several totally wicked mega batteries for my 510 that I would like to be able to use on my 808 carts.
Thank you!
CSteve
-
Ummm he just posted the link above.
-
Thanks!!
Thanks randpost, you were way faster than my service provider tonight!!
-
KR-808, greencig, and 901s are all threaded the same. However, there are different issues with these three models that are all airflow related.
KR-808 airflow:
The battery of a KR-808 has holes drilled through the threads allowing air to flow from the side to the area between the threads and center button. The carto has groves milled into the center button. So in a stock 808 setup the air flows through the holes on the batt thread and then through the grooves on the carto button.
KR-808 carto to 901 battery:
1) Get the adapter from VaporCountry
2) use a staple mod to allow a gap between the batt and carto this still may not allow enough airflow, as the 901 batt threads don't have holes.
3) modify your 901 battery. Just use a dremel to carve a groove all the way across your battery (threads and button). This will allow the air to flow.
KR-808 carto to greencig battery:
Screw and go. No mod needed.
KR-808 carto to 510 battery
Get a 901 atty to 510 battery adapter from AltSmoke.com and use procedure 2 or 3 above. I think Altsmoke might be carrying KR-808 cartos to 510 batts adapters soon to.
Greencig carto to KR-808 battery
greencig cartos don't have the groove carved into the button. So you can staple mod it or carve the grove across the button on the 808 battery. Or you could groove all your greencig cartos (I chose to do the 808 batt).
Hope this helps some of the 808 (and greencig) owners out there.
Edit: Damn...I type too slow
-
Forum Supplier
ECF Veteran
One thing to mention, with the greencig atomizer, you have to unscrew it a snidge (less than a smidge ;P) to actually get the right airflow. I've never tried a greencig/KR808D on the corresponding battery so I really don't know what the air flow is like, regardless...they do work hehe.
-
901 passthrough to 808??
This is my first post and I haven't even started yet, just trying to put together an order and learn along the way....please bear with me.
OK...Health Cabin sells passthroughs and batteries that say they will work for both the 808 (which I'm getting) and the 901.
Currently they are out of the passthroughs.
They do have the passthroughs in stock for the 901 however, so my question is can I use these with the 808?
They also have an adapter called "901 Battery connecter to KR Cartomizer"
This is what the description says: [With this connecter KR Cartomizer(Atomisers with cartridge inside) can work well with DSE901 Battery!]
It doesn't say anything about passthroughs though. Wouldn't the connection be the same on a battery and passthrough?
Or do I have this all wrong?
Would I need this and would that make it work?
Highping's post leads me to believe that it would only be an airflow issue, and this adapter should fix that problem (I think)...am I even close?
Thanks in advance for any help with this issue!
-
TrueGeminii: Welcome to the forum!
You are correct. The 808 carto will screw onto the 901 passthrough. The only (posisble) issue would be with airflow. The 808 battery has a couple holes in the threads that alow the air to come in from the bottom of the carto. The 901 has a hole on the side of the atty for air, so on the passthrough they may not have those holes. I say 'may not' because all of the 901 adapters I have been seeing are now coming with those holes, so the PT may also. I'm not 100% sure on that though. If it doesn't have those holes, you can either modify very easily with a dremel (if you're into that kind of thing), or you can use a "staple mod", or you can get that adapter.
The only issue I have with the adapter is that it is not really necessary since it can be replaced with a staple that costs .0001 cents. It also adds about an inch of length, but that will probably not bother you on a passthrough.
-
Other sources for adapters (working various ways between various attys and batts) are GoodProphets, Heaven Gifts, and NHaler. BTW, AltSmoke has other adapters in addition to 510->KR808D-1 & GreenCig.
"I am, therefore I think ... differently from most apparently." – Don DaBoomVape
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks