Lovin' this M401

[Sludge Van Diesel]

What sort of adaptors?

[mickeyxxx]

What sort of adaptors?

I have a mini-pipe and would love to use my evo atomisers with it.

Also I have a Creator/901 PCC I can use with an adapter.

Having said all this the Evo batteries last so long the PCC would only be used for long

trips out,etc.

Evo rules anyway but nice to have a change with the manual pipe.

[Houdini]

And all you had to do was to solder at a few points? No wires?

There is one wire inside from positive to positive.

[emus]

M401/M402/M403 tailpipe direct drip is my favorite.
A nice light weight ecig.
Mine have lasted about 4 months so far.

[Shadowdr]

I used a dead 510 atty for a Nickostick boxmod connector for my 401, the dead 401's will in turn make 510 connectors. If you have a 510 mod, a 306 will fit the threads and is very much like the 401.

[hecknaw]

M401/M402/M403 tailpipe direct drip is my favorite.
A nice light weight ecig.
Mine have lasted about 4 months so far.

Yep! dats what i'ma say'n dattle works!!!

[ZorbaTheGreek]

510 Battery -> 401 atomizer adapters. I bought one when planning my mod, thought I'd use a 510 battery thread since they seem so common, then I could just use adapters for my 401. And if I wanted to try a 801/901 or anything else I can just adapt it to the 510.

[Acroma]

510 Battery -> 401 atomizer adapters. I bought one when planning my mod, thought I'd use a 510 battery thread since they seem so common, then I could just use adapters for my 401. And if I wanted to try a 801/901 or anything else I can just adapt it to the 510.

I just got a VP/PT and chose the 801 to 510. I went to altsmoke and picked up the 510 to 401 just so I could use both on the VP.

[sentrarob]

The newer inner EVO carts hold much more liquid so less refilling and more vaping. I really love the Intellicig i have.