Need help with M401 Cart Dimensions and/or Compatibility issues...

[Sykkelspruce]

So I got my first E-Cig a few days back and it's not the best but it's working great for me so far.

It is a M-401 clone under the brand Health E-Cigarettes

The carts suck & tend to crack and also have no stuffing inside.

I want to get some carts that will fit onto this e-cig so I can try out the blue foam mod and stuff.

Does anybody know the M-401 Pilot cart Specs?

My cart dimensions are 9mm X 29mm ( I Think)

I also looked at the compatibility wiki and got the model: WT E002

any help?

[tbl35]

The carts suck & tend to crack and also have no stuffing inside.

Cannot fathom how this would work!

If it's an M401 clone (and it looks like it is), you should be able to put any M401 carts on it. Intellicig (Evolution) has M401 carts with a larger inner cart that has good capacity, but any M401 cart will fit.

Sorry no rulers in this house so I can't measure mine, but hope that helps a little.

[Sykkelspruce]

[quote=tbl35;943440] Cannot fathom how this would work!

They are little capsules inside the Cart that have liquid in them and a foil top. The atomizer breakes the foil seal and the liquid drips onto the atty.

I'm going to look for a place to order some cheap 401 carts so if they don't work oddly I wont blow a bunch of cash.


Last night after I posted this thread I decided to cut the end off the capsules and put polyfill stuffing in them to see how that would work.

So far so good, no juice hits and the atty isn't burning it or anything but they are quite small so the 401 carts will still be needed...

If i can I will post some pics if there is any interest.

[vapinarlington]

never expericence a cart with a foil over the top of them....interesting. You can find the M401 carts virtually anywhere for cheap....i know nosmoke4u has them for 3.50 a pack of 5 (empty); dietsmokes has them for the same price as well but you can buy filled ones there, and i believe trusmoker has them too

[Raenon]

I'm guessing the attys you have with that kit are also the "pointy" bridge ones as well. Authentic Smoore attys have very rounded bridges, but the clones look different. That would also give it the ability to pierce the foil, I suppose...

The only problem might be in that your atty might not be able to fit into a smoore cart without some crushing...
I suggest checking the fit before you blow a lot of cash on a bunch of them!

[Houdini]

The 401 cartridge comes with that same little capsule inside except it has the stuffing in it and is not covered with foil. You can try the blue foam in the one you have.

[tbl35]

They are little capsules inside the Cart that have liquid in them and a foil top. The atomizer breakes the foil seal and the liquid drips onto the atty.

OK, I can see how this would work now! Interesting

I'm going to look for a place to order some cheap 401 carts so if they don't work oddly I wont blow a bunch of cash.

Yeah they are really cheap so it's worth getting a few to try. What Houdini posted above are the standard M401 carts that I've gotten from a few places.

[Sykkelspruce]

Yeah I'll try that the stuffing made it taste burnny

[rtbob]

DISCLAIMER: I'am no way connected or affiliated with any vendors mentioned in my posts. I have never received any free stuff from any vendor. I mention the vendors only because I have ordered things from them and it arrives promptly, the cost is right and their stuff works! END DISCLAMIER.
I have been using 401/2/3 exclusivley since starting to vape back in 10/09. The only difference in the "4" series of PV's is the length of the batteries. I prefer the 401 because it is the longest lasting (also the longest in size). Intelicig-usa.com sells pre-filled carts with the larger insert that will fit your PV. For attys and extra batteries order from Midwestvapor.com. Genuine smoore with the rounded mesh for half the price of the intellicig brand. They only sell the manual batteries (they have a button). The manual battery allows you to "preheat" before inhaling creating more vapor and TH (IMHO).
The atty's that are pointed are called SLB. I have no idea what that stands for. They seem to work fine at 5 volts/ 1 Amp. With the battery at 3.7 volts they do not produce as much vapor or throat hit (TH) as the genuine smoore atty, in my experience. Midwest also has a USB pass-through for the 401/2/3 which allows you to vape at a constant voltage with out using a battery. Just plug it into a port on your puter. Better yet go buy a powered 4 port USB hub. Then no puter is needed and you can charge batts and vape at the same time!

[rtbob]

I could be wrong on the 402. It might actually be a 403. The inner cart on the left holds more juice so it lasts longer. All the parts are interchangable between the 401/2/3 except for the PCC. If you order a PCC make sure you get the one for the type of "4" series you have, otherwise it won't work right.