ZFM Zero Filler Mod

[SCOTTYBALLS]

OK here it is No filler! No polly! No foam! No Shopping! No Spring! No more making plugs 100% reusable! How dose it work? the bridge is in the resivor of juice and takes it when it needs it with out any flooding..

What you need

Place the cap that comes with your carts firmliy on the cart till you see a black outline of the cart threw the cap

Cut along the black line

You should end up with somthing like this..

Now you need to make a decission either cut a x or * in the center of the rubber plug or punch a 2mm hole in the center both work really well!
When using the X or star it will open up when the atty's bridge makes contact with it..
Now cut a straw to 15mm give or take 1mm I just eyeball it.. so you can make a shelf for the plug to rest on..
Insert the straw all the way to the bottom and fill with juice to the top of the straw.. if you desire you can cut vents into the straw for more juice room up to you.
Insert rubber plug down till it hits the straw ENJOY! if you get it right you will know it and will not have to make another plug again.. if you feel your atty is not getting enough juice make the X or star bigger or try the hole.. I relize this takes some skill to get it right if there is a demand for them pm me and ill make packs of 5 for small fee..

[eclypse]

Dont get it? You did not explain the last part where you inserted the plug? I thought you said no plug?

I'm guessing the plastic is touching the atty?

Here i thought this was going to be my new mod i came up with last night.

[SCOTTYBALLS]

Dont get it? You did not explain the last part where you inserted the plug? I thought you said no plug?

I'm guessing the plastic is touching the atty?

Here i thought this was going to be my new mod i came up with last night.

I said no more making plugs.. In other words when you are done with it you will not need to make anymore.

I fixed the last step sorry I thought it was self expalanatory.

[eclypse]

Ok.. I'll wait and see if someone melts the plastic.. If not i'll try it ofcourse. Me thinks the juice will stick inside the cart and you'll melt the plastic.

Hope it works.

[SCOTTYBALLS]

Ok.. I'll wait and see if someone melts the plastic.. If not i'll try it ofcourse. Me thinks the juice will stick inside the cart and you'll melt the plastic.

Hope it works.

Actually I had my barleby in my pocket at work yesterday and forgot to turn the switch off and it melted the plastic cart all the way around the plug totally destroyed the cart however I pulled the plug out and it was still perfect.. so after seeing that Im going to say no it will not melt

[Scottbee]

The cart caps aren't plastic. They're silicone if I'm not mistaken. Melting shouldn't be an issue.

[eclypse]

Actually I had my barleby in my pocket at work yesterday and forgot to turn the switch off and it melted the plastic cart all the way around the plug totally destroyed the cart however I pulled the plug out and it was still perfect.. so after seeing that Im going to say no it will not melt

Well in that case.. Sweet!

[firechick]

Any leaking issues? This is a great concept, I'm just a little concerned about dumping a ml of fluid if it leaks. I carry a Janty stick at work.

[Cherice]

I just tried this and it works. Refilling will of course need to be done with a syringe, but other than that, so far...so good.

[smonomo]

Scottyballs, I would say you slipped up big time with this mod..















IF...


















You didn't take out a patent on it before posting.


Testing on my 801 as I type..

Home run so far!!! ...using the + cut.