Laser Pointer mod Guide

[Carlos49]

Cisco,
Great job!!!! I might have missed the post but how long does the battery last?
Looks like a pretty simple mod... again great job

[olderthandirt]

OK I am going to try and do the best I can to do a step by step build on modding this laser pointer with a 901 atomizer. ...

Thanks for the step by step Cisco. Among the best I've come across so far!

Contributions such as this really make for a great forum. Modders sharing info like this is truly appreciated.

Thanks again Cisco

[kinabaloo]

Very nicely done Cisco

Perhaps worth saying to remove the battery before peering into the nose cone looking for the brass ring.

And a question: do you think it would be possible to leave off the end cone and fit in a dc jack type 901 connector right into the main body?

[mars_mcc]

Thanks so much Cisco for the great instructions! I had ordered one of these from the same ebay vendor you did when I saw your other post. You can't go wrong with $4.99 with free shipping. Cheap!

[warp1900]

WOW Cisco, i bet it was a lot more work to do the step by step guide than the actual mod itself.
I love the way it looks, too bad its not for me, that lil battery would last me about 15 minutes lol.
You should have used an RCA jack instead of the battery connector for versatility, but i guess it was done even before i posted the idea.
Great mod and excellent execution, thank you Cisco.

[Cisco]

Very nicely done Cisco

Perhaps worth saying to remove the battery before peering into the nose cone looking for the brass ring.

And a question: do you think it would be possible to leave off the end cone and fit in a dc jack type 901 connector right into the main body?

The first step in disassemble is removing the end cap....

The PCB actually threads up inside the nose cone so I done think you could remove it completely, you need the space.


Cisco...

[Cisco]

WOW Cisco, i bet it was a lot more work to do the step by step guide than the actual mod itself.
I love the way it looks, too bad its not for me, that lil battery would last me about 15 minutes lol.
You should have used an RCA jack instead of the battery connector for versatility, but i guess it was done even before i posted the idea.
Great mod and excellent execution, thank you Cisco.

Thanks for the comments Warp,

Yea it was way more work to get this post together but I felt posting this information was well worth it.

Cisco...

[jimmieu]

Great mod. Super pictures. This project is beyond my sad modding skills, but I learned alot. Thanks for sharing Your sweet mod.

[kinabaloo]

The first setep in disassmebly is remove the end cap....

The PCB actually threads up inside the nose cone so I done think you could remove it completely, you need the space.


Cisco...

i see - that end ...

i imagine that a dc jack leg could replace the board as contact point. Would make the construction a bit easier and the unit a bit shorter; though the cone does look quite nice.

[Tom09]

Very nice mod! Thanks for writing the guide and making the highly instructional images available. Super!