The Weller Dual Heat Mod

[Hangtime]

http://www.youtube.com/watch?v=ExmXJUXDJhIMove over Coldheat and make room for the Dualheat. Probably the easiest dual power mod you can make.

I could not find my multi-meter but I can tell from the vapor how well this thing works. It is a 6-volt soldering iron that is switchable from low to hi. The low setting hit just like my 510 and the high setting packs a punch.

Set the switch on "I"(8 watts), press the button and the green light goes on. Nice flavor, 'smooth' thick vapor.

Set the switch to "II"(11 watts), press the button and the red light goes on. Not as much flavor but hits hard,MASSIVE vapor. If your not ready for it, it might choke you.

To build this all you need to do is open it up and remove the oversized 'rca' adaptor and replace it with a normal RCA socket. If you don't use warp's awsome RCA mod, attatch a battery connector of your choice for your favorite atty.

[warp1900]

Awesomeness!

hehehe, thanks for the pix, I'm still waiting for mine to arrive.

So how long do you think it took you to mod it?



____

[Hangtime]

Awesomeness!

hehehe, thanks for the pix, I'm still waiting for mine to arrive.

So how long do you think it took you to mod it?



____

My rca socket had threads on it that i had to remove, so i took the connector to work today an took the threads off with the bench grinder, if it wasnt for that little snag, i would say 10 min+ 2hrs for the glue to dry. It works like the coldheat but I can vape it like my 510 bat with the flip of a switch, i love it!!

[Carlos49]

Great job.. I have so many ideas and no time to make them ...LOL can't wait to get a hold of mine and do some modding with it

[Hangtime]

Another forum member named it the 'Hungwell'.... lmao
Name fits, thanks bold.

[sattec]

WOW! That is sharp! Way to go! The perfect mod imo, has the atty tube buried in the mod body with shark gills on the side for air circulation. The tip would be the only thing breaking the smooth lines of the mod body...the atty and tip/cart just stuck on the end is not very cosmetic....imo, it makes it look too long on the front end...but I do want one!

[surbitonPete]

Woohooo.......fantastic my Weller should arrive in todays post. These soldering Irons have to be the easiest possible way to make a mod.

[DaMulta]

HAHA Another mod like mine with the Spot Light!!! I love the spot light in the dark waching all the vapor!

How many AA batteries does it hold?

Because your on RCA you should try Dual RCA into MONO plug.

[surbitonPete]

HAHA Another mod like mine with the Spot Light!!! I love the spot light in the dark waching all the vapor!

How many AA batteries does it hold?

Because your on RCA you should try Dual RCA into MONO plug.

The weller takes four AA size batteries. ..it can be a torch, a duel heat soldering Iron and a dual power e-cig all at the same time absolutely brilliant.

[Hangtime]

The weller takes four AA size batteries. ..it can be a torch, a duel heat soldering Iron and a dual power e-cig all at the same time absolutely brilliant.

Unfortunately the soldering tip 'RCA' had to be removed and replaced with the standard size RCA. If you could find a larger style RCA to attach a bat connector, then the Weller would not need any mod whatsoever but unless you outfitted all of your mods with a bigger style RCA(If you can find one in the first place, or use the soldering tip to mod the connector)The RCA mod would not be so universal.
Hope that made sense.

By the way Pete, If I didn't see your coldheat mod thread, I wouldn't be vapeing on these 2 mods right now.