Nerf's OFFICIAL OEM 401/510/801/901 connector thread V2.1

[wampumhunter]

Sorry wamp, but the MoQ on brand new designs is prohibitively high, your best bet on that would be to find a tap/die set for the connector and thread the backend youself, then tap the threads into a nut.

Do you have any pictures of a 901 to 801 adapter? This may work for my needs as it would have threads on both sides. Also what would be the cost of those....

Thanks
Scott "Wampum Hunter"

[Charged]

Hi nerf, nice job on finding these. How is the connection made on the positive center pin of the connectors? Is there a solder tab or something to solder to without blocking air flow through the center connection? The pics only show the atomizer side so I can't see what the other side looks like. TIA

[Kewtsquirrel]

The 901s I've got on hand already have a 3/4" or so wire soldered onto the outer edge of the center pin on the bottom side. You could either splice that if you need longer, or just replace it altogether. I wouldn't worry about airflow though - I personally always seal the center connection so liquid doesn't get inside of my mod, the change in airflow is minimal but will result in a slightly better throat hit.

[Some Guy]

Sent $ for 2-510 batt connectors and 2-801 batt connectors.
Thanks for the service. And hope you are starting to break even.
Let me know if I messed up the math.

[ZorbaTheGreek]

How many of these can the center hole be plugged on? And what do you use to plug it nerf? I'm thinking of using the 510 on the mod I'm working on (I have a 510 kit in the mail) but as of now I've only tried the 401. since you said the 401-> 510 is huge I'm thinking the 510 in my mod is the best call. I can adapter it up then if I want to try others. It's going to be a 3.7v mod.

[Sun Vaporer]

How many of these can the center hole be plugged on? And what do you use to plug it nerf? I'm thinking of using the 510 on the mod I'm working on (I have a 510 kit in the mail) but as of now I've only tried the 401. since you said the 401-> 510 is huge I'm thinking the 510 in my mod is the best call. I can adapter it up then if I want to try others. It's going to be a 3.7v mod.

Zorba--they all can be pluged with solider --takes two seconds.


Sun!!

[ZorbaTheGreek]

Wouldn't it restrict airflow completely on some models? 401 comes to mind.

[Kewtsquirrel]

My 510 connectors are actually sealed from the factory, there is no center hole. I've had no issues with airflow thus far and run plugged on everything.

[xybe]

Since there might be someone else interested on this I am posting this request on your thread instead of sending a PM, I hop it is appropriate.

Would you consider selling RCA adapters (male RCA to battery thread) for the 510 and other popular attys? I would really like to get a custom RCA mod and a member has agreed to build one but I haven't found anyone that sells the adapters.

Thanks!

[Kewtsquirrel]

I might consider it, if I get a chance I'll run by fry's this weekend and give them a look. They'd run about $20 tho, I don't have much time to make stuff these days so anything that needs actual assembly comes at a premium.