OK,I Am Nuts!!!!

[Liberate_Yourself]

I would commission you to do a battery for me except for the fact that I would cry when it finally died.

Great work!

There is always the flashlight mod.. haha. That would be insane!!

Great work Silver, those flames are bad a**!

[SilverEagleBW]

Thanx all

Dusty i am in Pa,you betcha,flashlights,screwdrivers,pipes,and i will do one of the 1000 batteries cause they are supposed to last longer,be fun,ill get to painting an E-cg part here soon,,,,,,,

[Illuminus007]

This makes me think, there could well be a niche market for 'skins' or stickers made especially for e-cigs.

Hrmm....

There actually is a store that sells e-cig skins... *wonders off for a few mins to find a link* here we are! E-Cig Skinz : Tasdad Design

By the way, those are some amazing flames. If do choose to have those printed to make into skins, that would probably be the most realistic way to sell your art here. Painting mods could also be great. I was going to make myself a flashlight mod, but it just would be so damn awesome if it had some of those purple flames!

[SilverEagleBW]

Illuminus;

No way i can do those pearl purple flames small enough to work on an e-cig.The smallest needle i can use on an airbrush to shoot them is a 3.0,the pearl particles clog any needle smaller than that.I can however airbrush a larger panel with the pearls and photograph it then reduce then make a wrap,wont ever be as shimmering as the real paintjob with the reflections of the pearl catching light,but would be a way cool look.I can print the wraps out on vinyl film to size,there will be a samll overlap and again ,problem there,impossible to get a perfect match with the flames on the overlay,just kep the overlay on the bottom side of the battery if there is such a thing,lol.I have to do some research etc.,i have a ton of ideas for artwork,on wraps for these e-cgs,,

[cekte]

Very nice artwork Silver! I would also be very interested in seeing some batteries painted. Please keep us posted. You've got some good ideas.

[Lika]

@ Silver...

*Bump*

Done anything more on this yet? I'd love to see some photos of decked out ecigs

[Wildsky]

I have seen skins for e-cigs, but they apparently make the batteries etc.. too fat/thick to get into the charger!

[taukimada]

I have seen skins for e-cigs, but they apparently make the batteries etc.. too fat/thick to get into the charger!

Tasdad sells them.. but last i heard he was still trying to figure a way around the charger fitting... maybe cut them a slight bit shorter

[Vince1]

The chargers are just plastic, It seems like you could just make the battery hole a little bigger with a blade or drill bit. When in dought, Dremel it out!

[taukimada]

The chargers are just plastic, It seems like you could just make the battery hole a little bigger with a blade or drill bit. When in dought, Dremel it out!

we can't do that here in TN... our motto is more of the "if you cant duct it... ...... it" philosophy