The Mini Juice Machine Mk 3

[petercro]

Mini Juice Machine Mk3


Hello All.

The http://www.e-cigarette-forum.com/for...e-machine.html thread is not over, I think everybody who participated may use it as a reference thread.

The Mini J M. Mk1 is at home with me working 24/7.
The Mk2 has had problems with the push switch, battery connections and feed tube.
(It is on it's way back to me for a postmortem)

The Mk3 is on the build bench and progressing.
I was hoping to use the silver tactile switch from madvapes, with a mosfet.
But I was unable to contact Mark at madvapes. I know there site is being updated and my emails may have been overlooked. This is not a bad comment for madvapes as I also know they are setting up a UK outlet. (I can't wait).
So instead I decided to go with a miniature microswitch with roller actuator.
Great smooth action and rated 3A @ 240v

Ordered 2 18650 2600mA, When they arrived I was surprised to find that they were 4mm shorter than the 3000mA version.
Surprised but happy, as it allowed me to add a -ve battery spring within the box.

Main slide switch as usual, but this time I've added a main power ON LED.

At the bottom of the mod are 2 chrome studs, which are a direct link to the +ve & -ve of the battery for a charging stand..

WhatAClumsyGirl was good enough to find me a UK supplier of 3ml eyedropper bottles, which I ordered with some 7.5ml bottles.
Delivered within 24hrs, great site Clumsy.
The 3ml bottles are very small and I will use them in the Mk 4.
But the 7.5ml bottles are a perfect size and shape.

Have a look for yourself
Atty and tubing not installed yet......

The light material supporting the battery is epoxy putty (great stuff)
Even though I sanded the inside of the box prior to installing the epoxy putty. It still detached from the box after curing, a little liquid glue sorted it.


You can clearly sea the power on LED and the charging studs.






The bottle still has to have the screw lid cut and the tube added.



If you can see, I took the green sleeve off a length of the wire an slipped
it of one of the LED legs. Saved a little time and soldering.
Good close-up of the microswitch.

More to follow.

Petercro.............

[MrPuff]

Looking good, should get a lot of battery life out of that beast.

[nicotime]

Looking good!! Keep us updated.

[MastiffMike]

I know I'm probably jumping the gun with questions as I'm sure they'll be answered in time but:
1. Pics of button? Specs on button?
2. What slide switch are you using?
3. Charging contacts - B/c the contacts are both on the bottom is there any fear of them possibly being shorted (by any metal surface, like a key in the pocket)? Are you planning anything to prevent this? Maybe something as simple as a raised "bump" between the two to prevent flat metal from being able to connect with both at the same time?

Looking great! I'm sadden by the closing of the old thread but look forward to this one being just as good!

[Guineahill]

I really like it! The epoxy putty dam is a great concept. I love that stuff.

I agree about putting a short ridge between the charging nubs to avoid a possible incidental short. Or, in the future, perhaps a three option master switch with one dedicated to charging.

Isn't it amazing how much difference 4 mm can make? I look forward to watching the progress of this model!

[clyde2801]

Hey, Peter, here's my review of the Tardis, MkII:

http://www.e-cigarette-forum.com/for...ml#post1096245

Are you putting the bottle directly under the atty in the mk III?

[MastiffMike]

Yeah, I think it was Highping who thought of the idea of putting the contacts on opposite sides, thus minimizing short possiblities. I could totally envision a tapered charging stand where the sides slope down such that a simple drop of the unit into the charger guarantees proper contact.

[petercro]

I was keeping the best to last.
But you are too quick off the mark.
The positive stud is connected via a reed switch, and the charging stand has a magnet within it. (Not built the stand yet but thats the plan).

Link to microswitch Miniature Microswitch : Micro Switches : Maplin

Link to slideswitch Single Pole Sub-Miniature : Slide Switches : Maplin

[Guineahill]

LOL - You got me! I love the idea.

[Ralph T]

Nice work Petercro!

I would have a very good look at your battery. It may be shorter because there is no protection PCB on the negative end. I have this battery. Notice that there is a ridge around the positive end and the negative one. The PCB is on the negative end and is shaped like a button battery. I think they just heat shrink it in there with the plastic sleeving. I am not seeing that ridge on the negative end of your battery.