Cigar rebuild - PICS (Bling v2)

**kinabaloo** · 03-25-2009, 07:16 AM

RjG - same power if thicker but longer - with greater area.

When one thinks about it, much of the juice drawn towards the coil will actually miss it in the present design.

What if the coil wick joined the outer metal wick - would be too much juice, or vaping heaven? (i think i know the answer but someone should try it!)

I will be experimenting along these lines soon and was hoping for some pointers - or perhaps just some ideas ... Anyone ? The only fixed factor is that i will use nichrome wire, but how much, what shape, core or no core, layout, ... everything else is open

I'm not looking for an atomiser mod, but something new, a revolutionary design advance (i can dream ...)

**RjG** · 03-25-2009, 05:59 PM

kinabaloo - same power if thicker but longer - with greater area.
maybe... my thoughts on thicker wire is, it would need to be a lot longer to equal the correct resistance, since you have to make the resistance the same to continue drawing 1 amp. If the current would be the same, it would be colder since heat is conversion of watts consumed and the available heat would be spread out across a lot more surface area of the coil.
To get the proper temp would require more power... since you can't change the voltage, that would be hard to do without adding batteries. Or you could cut the resistance to get it hotter. But then it would draw more amps, hurt the battery life (or the batteries). I could be wrong, that's just my thoughts

When one thinks about it, much of the juice drawn towards the coil will actually miss it in the present design.

No... in the current design, liquid is wicked into the metal mesh, saturating it to equal the cart filling by surface tension/capillary action. When you inhale, a bit of liquid comes up from a hole (or 2 or 3) directly under the atomizer, kinda like a vacuum/venturi effect, bubbles of liquid come up through there, hitting the bottom of the coil directly.

What if the coil wick joined the outer metal wick - would be too much juice, or vaping heaven? (i think i know the answer but someone should try it!)

tried that, that was the wick with "tails"

It works, but not right away. I still have that cigar. It works GREAT when it's hot. Real hot, it keeps going like a train smokestack. It takes many puffs to get it hot though... like my other "too much wick" experiments.... there's a fine balance between the available liquid, and the size of the coil to vaporize it... move too far from the default and it gets too hot, or too cold, or runs out of gas, or takes to long to "prime up". I'm guessing the tailed wick is too wet

I will be experimenting along these lines soon and was hoping for some pointers - or perhaps just some ideas ... Anyone ? The only fixed factor is that i will use nichrome wire, but how much, what shape, core or no core, layout, ... everything else is open I'm not looking for an atomiser mod, but something new, a revolutionary design advance (i can dream ...)

I hope you succeed :-) I'll participate

**kinabaloo** · 03-25-2009, 06:51 PM

RjG - "When you inhale, a bit of liquid comes up from a hole (or 2 or 3) directly under the atomizer, kinda like a vacuum/venturi effect, bubbles of liquid come up through there, hitting the bottom of the coil directly." Yes, hopefully

That was my meaning, from the mesh under the atomiser; at prsent, it's quite a small target that needs to well aligned.

How about using mica? It seems perfect in every way to use as a former for the wire. I am imagining a circular disk. Vinegar can clean the wire but not the firewick inside the coil. So perhaps change the coil into something flat - better target too.

I think it would be best to replace the juice delivery system at the same time. Do pipes and cigars do anything much different wrt cartridges (juice storage) and wicking? And those produce more vapor simply because the coil draws more current on the basis that the battery is bigger, right? In other words, to begin with it makes sense to start with an existing atomiser coil that is about the best. Assume a powerful battery; what would you choose - the atomiser from a ... ?

The present design involves a kind-of nozzle. I am thinking to employ a real nozzle, driven by an electrical pump or something that can can have a pump-like action - pushing out a tiny amount of juice on each draw. The juice reservoir can then be effectively sealed (while in use, still refillable) and the delivery made consistent. It could be located between the battery and atomiser. An alternative to a nozzle with the juice 'behind' the atmiser is a thin firewick that leads all the way from the juice holder to inside the coil.

**RjG** · 03-26-2009, 12:40 AM

kinabaloo, you want a Wizard Stick: Zero Toys Online Store

... battery powered... a 1/8th inch socket for an optional six volt AC adapter, for industrial-level smoke production ...Reservoir...has two little smoke fluid reservoirs. One of them you fill with the supplied fluid. The other one's for overflow, from overenthusiastic use of the pump-trigger. You can ...recycle fluid that ends up in the overflow reservoir.... uses glycol smoke fluid

**combovan** · 03-26-2009, 02:55 AM

wow do you think that thing would actually work with our juice it looks really cool and cheap !

Originally Posted by RjG

kinabaloo, you want a Wizard Stick: Zero Toys Online
Store

... battery powered... a 1/8th inch socket for an optional six volt AC adapter, for industrial-level smoke production ...Reservoir...has two little smoke fluid reservoirs. One of them you fill with the supplied fluid. The other one's for overflow, from overenthusiastic use of the pump-trigger. You can ...recycle fluid that ends up in the overflow reservoir.... uses glycol smoke fluid

**RjG** · 03-26-2009, 03:41 AM

it would definitely work, it's a glycerin atomizer, same as your e-cig !

If they sold them in Canada, I'd order one, just for fun, LOL

**kinabaloo** · 03-26-2009, 06:15 AM

RjG - looks like a fun thing to investigate, thanks for the tip!

But what about standard atomizers. Any recommndation there of a cigar or pipe atomizer that rocks?

**combovan** · 03-26-2009, 03:06 PM

Originally Posted by RjG

it would definitely work, it's a glycerin atomizer, same as your e-cig !

If they sold them in Canada, I'd order one, just for fun, LOL

well hmm i wonder if it heats it up like a cig too that would be awesome for home consumption and at 16.95 a pop the best deal on the internet ....if it doesnt heat it up though cold vapor sounds rather poor to me :P