MAKO FAMILY available now....

[smokindeuce]

Here's one of the banners I mentioned:

[PlanetScribbles]

I am interested in these 5v batts too, for my SB, so dimensions would be cool.

[smokindeuce]

Hi Planet Scribbles!

The battery is only 14mm diameter, but the length should be fine although you may require some spacers....

[PlanetScribbles]

I'll have to order some of the DX 1mm rare earth magnets then

[smokindeuce]

I'll have to order some of the DX 1mm rare earth magnets then

The problem is that these 5V batteries vary by up to 1mm in length so it's difficult to say for sure. If you let me know the exact length of the 18650's you use in your SB, I'll try and match some up as close as possible.

We also sell the spacers in our mod shop FYI.....

[PlanetScribbles]

My Ultrafire silver LC18650s are 18mm x 68.5mm end to end

[smokindeuce]

My Ultrafire silver LC18650s are 18mm x 68.5mm end to end

Okay, I've just measured one of the batteries around 65.5, so will have to source out the longest possible for you (maybe 67mm need to check stock tomorrow).

That being said, if you have any extra play on the SB spring, you might be alright without the need for spacers....

[PlanetScribbles]

Great, i'll keep a watch. I'm sure that a mere 1.5mm will get covered by free play in the spring, there is a fair bit left to work with on closing up the battery compartment.

[PlanetScribbles]

Any word on the 5v batteries Tim?

[smokindeuce]

The longest I can find are a little over 66mm....