801 Ats Don't Work With Passthrough?

[Oceaneco]

I purchased 801 ats from MVS and the 801 Passthrough from them as well.

The Atomizers work with regular batteries, but not with the passthrough that they sold me or with the David Yang Passthrough.

According to other post that I have read, they are indeed RN4072's and not DSE801's as advertised!

I know that I am not the only person this has happened to.

I would like to return them, as I only use the Passthrough and they will not respond to my emails!

I am really getting tired of these companies that are happy to take you money, but do not want to deal with any issues! Not good business!

My apologies MyVaporStore the email went to my AOL Spam, I did recieve a response!!

[Cellmeister]

Hi Ocean,

I Don't Know Exactly What You Did In Fact Purchase But This may Help U:

Please Check The Posts On the USB Pass Throughs Issues.

The USB Pass Through Is Most Likely Not Defective & Just Not Be Making Contact and Should be an Easy Fix & or To Check If Not Defective (it would have to be tested 1st).

Also You Should Designate Separate Atomizers With Use For Batteries Or USB, I don't Suggest To Mix & Match, That May Create The Problem You Are Having.

I Have Not Ordered From This Store Yet, I Have Read Several Positive Posts.

Just My Opinion.

Keep Vapin!

[Sun Vaporer]

Ocean--Cell is right here--it is a contact issue. The treading is somtimes will not allow the atomizer to make contact with the usb passthough center peg which is the + terminal. About 1 out of every 5 of my 801's will not work on a passthough---Sun

[Oceaneco]

Ocean--Cell is right here--it is a contact issue. The treading is somtimes will not allow the atomizer to make contact with the usb passthough center peg which is the + terminal. About 1 out of every 5 of my 801's will not work on a passthough---Sun

Hi Sun, you and I had a similar conversation about this. The DSE801 ats with the fat post work great with the passthrough, but not the RN4072 with the skinny post. They do not get the connection. I have 5 of these ats and not one will work on either passthrough.

[Sun Vaporer]

Hi Sun, you and I had a similar conversation about this. The DSE801 ats with the fat post work great with the passthrough, but not the RN4072 with the skinny post. They do not get the connection. I have 5 of these ats and not one will work on either passthrough.

Ocean--I am telling you to never buy an RN4072 again. The treading is too long, the burn to hot, waste e-liquid, and have a very short lifespan.

Like we spoke of, you can try with a tweezer to pull the center peg up buy prying under the hole in the atomizer, but I have only had minimal success in doing this---like maybe 3 times total out of many---so do what I did and throw in the towel on the RN4072--they are out of control and stick with the 801's----Sun

[teardrop88]

Ocean--Cell is right here--it is a contact issue. The treading is somtimes will not allow the atomizer to make contact with the usb passthough center peg which is the + terminal. About 1 out of every 5 of my 801's will not work on a passthough---Sun

Ditto. As long as my atomizers were on tight, it seemed to work for me.

[aasupplyny]

I am only posting this because MyVaporStore is not responding to my emails after a week!

I purchased 801 ats from MVS and the 801 Passthrough from them as well.

The Atomizers work with regular batteries, but not with the passthrough that they sold me or with the David Yang Passthrough.

According to other post that I have read, they are indeed RN4072's and not DSE801's as advertised!

I know that I am not the only person this has happened to.

I would like to return them, as I only use the Passthrough and they will not respond to my emails!

I am really getting tired of these companies that are happy to take you money, but do not want to deal with any issues! Not good business!

Hi,

We are truly sorry to hear about the trouble you're having ... but

The only email in which we received from you was dated Tue, April 7, 2009 10:12 pm. (Last night) Which I did respond to this morning. Did you get this email?

I have included the return/exchange info and address.

The longest we've ever taken to reply to an email is 18 hours but the avg. is about 2 hours. I'm sure other customers can attest to this.

We also respond to PM's, a bit slower but we do.

All of our 801's are stamped SLB and they are all from one manufacturer so I'm 100% certain they are 801's as advertised and not RN's.

Regards,

myvaporstore

[Sun Vaporer]

Hi,

We are truly sorry to hear about the trouble you're having ... but

The only email in which we received from you was dated Tue, April 7, 2009 10:12 pm. (Last night) Which I did respond to this morning. Did you get this email?

I have included the return/exchange info and address.

The longest we've ever taken to reply to an email is 18 hours but the avg. is about 2 hours. I'm sure other customers can attest to this.

We also respond to PM's, a bit slower but we do.

All of our 801's are stamped SLB and they are all from one manufacturer so I'm 100% certain they are 801's as advertised and not RN's.

Regards,

myvaporstore

Hi aasupplyny--Could you please tell us where the SLB stamp is located on the atomizer? I have seen that on Batteries, but of the many atomizers I have taken apart, I can find no markings. So a heads up on where yours is would be appreciated---Thanks--Sun

[aasupplyny]

Hi Sun,

The stamp on the atomizers are located in the same place they are located in for the batteries.

I took a pic of a 901 atty if that helps.

[Sun Vaporer]

Hi Sun,

The stamp on the atomizers are located in the same place they are located in for the batteries.

I took a pic of a 901 atty if that helps.

I do know and have scene the 901--but would you be kind enough to post an 801 for all of us!!! Greatfully appreciated--and Thanks--Sun