+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 17
Six serious/basic questions - I need Answered in The E-Cigarette; 1st When changing carts, you touch the e-liquid..is that bad for you... 2nd Should you wear gloves when changing??? 3rd ...
  1. #1
    Full Member nineguns's Avatar
    Join Date
    Apr 2009
    Location
    Former New Yorker living in Louisiana
    Posts
    26

    Smile Six serious/basic questions - I need Answered

    1st
    When changing carts, you touch the e-liquid..is that bad for you...

    2nd
    Should you wear gloves when changing???

    3rd
    When recycling the carts, can you reuse the material inside?

    4th
    Or do you take that material out and restart put in the e-liquid on what kind of material?

    5th
    The atomizer...should the inside nipple of the atomizer touch the material?

    6th
    If the atomizer is taken care of, draining nightly - keeping it upside down on a napkin - how long can the atomizer last...

    I just want basic answers - for these basic questions from a noobie of a week that can't seem to find the basic answers here...
    Thank You Thank You in advance !!!!
    8 days of not smoking...after smoking everyday for 30 years...

  2. Advertisement
  3. #2
    Full Member
    Join Date
    Apr 2009
    Location
    Texas, USA
    Posts
    57

    Default

    Watch Spikey's Vid and I think it will answer most of your questions and show you the basics

  4. Advertisement
  5. #3
    Moved On
    Join Date
    Dec 2008
    Posts
    543

    Default

    Quote Originally Posted by nineguns View Post
    1st
    When changing carts, you touch the e-liquid..is that bad for you...
    Not unless you are allergic
    2nd
    Should you wear gloves when changing???
    Not unless you are allergic or have a penchant for weirdness
    3rd
    When recycling the carts, can you reuse the material inside?
    Yes
    4th
    Or do you take that material out and restart put in the e-liquid on what kind of material?
    Remove material, fill, replace
    5th
    The atomizer...should the inside nipple of the atomizer touch the material?
    No
    6th
    If the atomizer is taken care of, draining nightly - keeping it upside down on a napkin - how long can the atomizer last...
    From a day to a year with current technology

    I just want basic answers - for these basic questions from a noobie of a week that can't seem to find the basic answers here...
    Thank You Thank You in advance !!!!
    8 days of not smoking...after smoking everyday for 30 years...

    Have a bit of patience and search this forum, you will find all the answers in greater detail.
    Alan.


  6. #4
    Super Member ECF Veteran
    Join Date
    Mar 2009
    Location
    CHAPEL HILL NC
    Posts
    534

    Default

    Do yourself a HUGE favor, along with anybody that is thinking about answering your questions

    Look at Spikey's video and look at as many of them as you can Reading an answer, will not give you the sense of what it is about
    But the most important thing, do not be afraid of this stuff, it will not kill you, ( or atleast we don't think it will) or better said, nobody has died yet, that we know of. Although I dont remember hearing from Trog in a while!! HUH watch the video's

  7. #5
    Ultra Member Verified Member
    ECF Veteran
    yvilla's Avatar
    Join Date
    Nov 2008
    Location
    Rochester, NY
    Posts
    1,815

    Default

    Nineguns and Letzin, one tiny correction with regard to question 5:

    The cart material actually must touch the mesh bridge of the atomizer; that is how the liquid gets wicked down into the atomizer coil.

    If you have the material scrunched too far inside the plastic of the cart so that it doesn't touch the mesh of the atomizer, you will soon see no vapor. So the filler material should always be right to the very edge of the cart, so that it does touch the mesh.

    _____Non-Affiliated FanGirl_____

  8. #6
    Full Member
    Join Date
    Apr 2009
    Location
    Dublin, Ireland
    Posts
    83

    Default

    Quote Originally Posted by yvilla View Post
    Nineguns and Letzin, one tiny correction with regard to question 5:

    The cart material actually must touch the mesh bridge of the atomizer; that is how the liquid gets wicked down into the atomizer coil.

    If you have the material scrunched too far inside the plastic of the cart so that it doesn't touch the mesh of the atomizer, you will soon see no vapor. So the filler material should always be right to the very edge of the cart, so that it does touch the mesh.

    I actually did not know that. I was doing the opposite - pushing the material down because I thought a nasty burning taste I was getting was the material overheating. Thanks.

  9. #7
    Full Member
    Join Date
    Feb 2009
    Location
    illinois--usa
    Posts
    54

    Default

    If we knew what kind of e-cig you have i'm sure people with that style would come up
    with some answers.

  10. #8
    PV Master ECF Veteran Vicks Vap-oh-Yeah's Avatar
    Join Date
    Mar 2009
    Location
    West Allis, WI
    Posts
    3,945
    Blog Entries
    7

    Default

    Quote Originally Posted by Rookie View Post
    Watch Spikey's Vid and I think it will answer most of your questions and show you the basics


    Just in case you are having trouble finding it - here's the link



    New, Updated, Comprehensive Intro to Vaping!

    Spikey did an AWESOME job whipping this vid up - it answers so many questions newbies have...

    A lot of this stuff will make a lot more sense once you have a unit in your hands, believe me, I lurked for about 2 weeks before I jumped on the bandwagon and bought my 901.....once it came, clarity happened....so much of what I'd been reading MADE SENSE.

    Don't panic-the PV will become your friend real soon....
    Vapefest II - St. Louis - We Came, We Saw, We VAPED!www.vapefest.com

    ONE purpose, ONE goal, ONE MILLION voices raised with ONE message! - Our right to VAPE!

  11. #9
    Full Member nineguns's Avatar
    Join Date
    Apr 2009
    Location
    Former New Yorker living in Louisiana
    Posts
    26

    Default Thank you all, for answering....I really appreciate it!!!

    Have a GREAT weekend...!!!

  12. #10
    Ultra Member Verified Member
    ECF Veteran
    yvilla's Avatar
    Join Date
    Nov 2008
    Location
    Rochester, NY
    Posts
    1,815

    Default

    Quote Originally Posted by Klimpt View Post
    I actually did not know that. I was doing the opposite - pushing the material down because I thought a nasty burning taste I was getting was the material overheating. Thanks.
    So long as you keep it moist, you'll be fine. The nasty taste is a sign you have waited too long to top off your cart.

    _____Non-Affiliated FanGirl_____

+ Reply to Thread
Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

SEO by vBSEO