so I have just recieved my 901 starter kit!! in The E-Cigarette; the "cotton wool" holds the liquid mate...you cant refill without it...essentially the wool is the cartridge...the plastic bit just holds ...
-
Ultra Member
ECF Veteran
the "cotton wool" holds the liquid mate...you cant refill without it...essentially the wool is the cartridge...the plastic bit just holds it...
so you need to wait until it dries,and put it back in...then fill it with the liquid...
-
For now, while you get the hang of it you are better off using the filler. Dripping onto the atomiser is a bit more advanced and can cause overdrying or flooding problems.
EDIT
You beat me to it again Darcy 
The filler can be dried faster with some tissue if required.
-
Ultra Member
ECF Veteran

Originally Posted by
Kate
EDIT
You beat me to it again Darcy
we must be equally bored Kate...
-
Ultra Member
ECF Veteran
man , are you in for a treat with the screwdriver...this thing just goes on and on and on and on and on ...........
oh and pillboxes french pipe...e-smoking heaven....
-
Yes Darcy, I reckon. I don't like it so much when it's quiet here, I like to be talking or reading new stuff.
Did you get the prototype device Trog said he'd send you a while back? How is it, does it use a 901 atomiser?
-
thanks guys, ok, so I have washed out my cart and the cotton wool, the wool is now on the radiator drying and I will use a match and some tissue to make sure the inside of the cart is clean and dry, am I getting it now??
dude - I am prayin to have the SD by the weekend, I really am!!
-
Ultra Member
ECF Veteran
you can dry the polyester wool by squeezing it in some kitchen paper till no more water squeezes out.
I normally just blow out the water from the plastic cart.
This is where some tweezers come in handy or a syringe , but syringe isnt really required.
What i do is , drip about 5 or 6 drops of juice into the empty plastic cart, then take the polyester filling and carfully replace it back into the plastic cart, it should absorb the juice thats in there ( this is easier with tweezers).
Once the polyester is back in , top up the cart with more juice untill it's nice and wet. not too wet as to have a little puddle on the top mind. then pop the whole cart back into your e-cig and puff away.
Top the cart up ( 2 or 3 drop into the polyester ) as required.
-
Make sure you watch Dusty's tutorial videos: Helpful links and videos for a new user.
They're very useful.
-
Ultra Member
ECF Veteran

Originally Posted by
Kate
Yes Darcy, I reckon. I don't like it so much when it's quiet here, I like to be talking or reading new stuff.
Did you get the prototype device Trog said he'd send you a while back? How is it, does it use a 901 atomiser?
yeah...i used to be pretty full on with this site...problem is,i think i know just about everything there is to know about ecigs at this stage...im getting impatient for some evolution...but arent we all...
anyway,yes i got the prototype Trog kindly sent me...nice to have a unique device...it uses a 901 atomiser,and works well...its bigger than a screwdriver...but uses smaller cigar batteries,so it wouldnt be quite as impressive as a screwdriver...
drysmoking,its quite similar to a kiss vapour-wise...unfortunately,all my cigar batteries are a bit worn out,so i need to order new ones,but so far so good...
i must add that Trogs workmanship is excellent-this thing looks bulletproof...
-
It sounds handy Darcy. Those batteries are pretty cheap and then you only need to buy atomisers to keep it going. I guess it has a manual switch, that is a really good thing to have with an ecig. If you can cope with the size it sounds like a decent device, quality performance without expensive batteries.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks