New M401

[judasburrito]

Thanks Shawn, I'm going to watch it for a few more days--it seems alright.

As for topping off carts, here's what I've found capacity-wise with my two superminis:
RN4081/NPRO: Topping off/no more vapor: about 6 drops, Empty dry cart: about 8 or 9.
M401: Topping off/no more vapor: about 4-5 drops, Empty dry cart: about 6 or 7.

I think the trick is accuracy: make sure your drops are hitting the foam square on, you don't want it dripping down the sides of the inner cartridge (this is when it gets in your mouth.) Also, make very sure that each drop is soaked in completely before putting another in. I had a bit of liquid get into my mouth with the 401, but only with a brand new filled cart, never after topping off.

One further note on the 401: This thing has taught me to vape a bit differently. With my NPRO I just hit as hard as I want, but with this, the massive vapor comes from pulling just hard enough to make the led light up, and continuing this as long as you can. Be careful, though, especially with high nic liquid--this will give you a monster hit.
-Matt

[shawnp1]

u got the way to get a good hit from 401 down. it does produce a nice amount of vape doesnt it? pretty consistently too.

[frazzledglispa]

I will have to try topping off with the syringe. I also just noticed that if you blow through the cartridge (after removing it from the atomizer of course) the inner cart pops out. I just wiped all of the excess juice off of the outside and topping of the cart I pushed it back in and it is now smoking nicely with no juice in the mouth. Perhaps this will be my new method.

As far as my off center LED goes, it is only a little off, and I like it that way. It makes it look a little more "real"

[shawnp1]

frazzle as long as u are happy so am i

[PeteMcArthur]

I will have to try topping off with the syringe. I also just noticed that if you blow through the cartridge (after removing it from the atomizer of course) the inner cart pops out. I just wiped all of the excess juice off of the outside and topping of the cart I pushed it back in and it is now smoking nicely with no juice in the mouth. Perhaps this will be my new method.

As far as my off center LED goes, it is only a little off, and I like it that way. It makes it look a little more "real"

Great discovery!! That will stop me faffing about with syringes

[shawnp1]

u can also u use a paper clip to push the cart out of the mouthpiece as well works very nicely for me.

[Dart Vapor]

Hi!
I'm using two M401 "gold edition" for 2 month now.
As a chain smoker,they get tortured 14 hours a day,they still do their job.
After 2 days,the golden color on the atomizer vanished,it's now silver.
After 3 weeks,the atomizers got clogged.
I boiled them in water , steamed them, they work fantastic again.
I noticed:The on-and off screwing of the battery to the charger,leaves metallic dust on the screw of the battery.This clog's the atomizer.
After charging,wipe the screw with a cloth.

I use the paper-clip-method too.
Here my trick:
Push out the capsule with paper clip.
Take out the white foam and place 4 drops into the EMPTY capsule.
Put foam in and one drop on top of the foam.

[Fedor]

While litecigusa replenishes their stock on the M401, you guys can try ordering direct from manufacturer at

Welcome to Absolutely eCigs! Buy e-Cigarettes/ Electronic Cigarettes Online Direct from Manufacturer! - Home

I got my M201s and M402s there. M401 will be next on my list.