Itaste SVD - Only with Tanks? - Page 2
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22

Thread: Itaste SVD - Only with Tanks?

  1. #11
    Member
    Join Date
    Oct 2013
    Location
    Prescott, AZ
    Posts
    9

    Default

    Quote Originally Posted by Recon Number 54 View Post
    I only have limited hands-on experience (a buddy was nice enough to let me try his), but if memory serves, it has both 510 and eGo threading. That should connect to nearly anything/everything out there (with very few exceptions).
    Does that mean I have to purchase something to screw onto the SVD to put the coil/wicks on?

  2. #12
    Full Member Verified Member
    Join Date
    Oct 2013
    Location
    San Diego, CA
    Posts
    46

    Default

    Quote Originally Posted by deimos319 View Post
    I vape at 3.6V (anything much higher and the Protank II burns the juice. As for wattage, I'm not sure.
    I tried using voltage on my SVD, but I found it just much easier to vape using wattage. I have no idea why but it just seems I have more control over my mod and flavor when I use wattage. I vaped at 7w and couldn't pull much, then someone showed me that I should be around 13 (almost double!) and that really opened stuff up for me. Hope that helps.

  3. #13
    Super Member ECF Veteran
    Join Date
    Nov 2012
    Location
    Missouri, USA
    Posts
    409
    Blog Entries
    1

    Default

    Quote Originally Posted by deimos319 View Post
    Does that mean I have to purchase something to screw onto the SVD to put the coil/wicks on?
    The SVD is only a power delivery device. Your kanger protank II would go on it.
    Since it's the protank you want to get away from, you should try a different delivery device.
    I been using The Vision Vivi Nova (2ml) for about 6 months with no problems. It comes with 2 replacement heads, I'm on the second. Not bad for $8 + shipping. It will work with your battery, but upgrading to a twist or SVD would be better. 1.8 ohm heads for a fixed battery or twist, 2.8ohm for a twist or SVD.
    http://altsmoke.com/vision-vivi-repl...-tank-kit.html

  4. #14
    Full Member Verified Member
    Join Date
    Oct 2013
    Location
    NOTTINGHAM ENGLAND
    Posts
    92

    Default

    try these euro vapes they do some good deals you 6% discount from the start then a further 20% at checkout if you spend over 30 I got this EURO VAPEZ - INNOKIN - iTaste MVP 2.0 UK and I also had a vamo from them

  5. #15
    Ultra Member ECF Veteran Chas F.'s Avatar
    Join Date
    Sep 2013
    Location
    Colorado
    Posts
    1,078

    Default

    Quote Originally Posted by deimos319 View Post
    Thank you! Good to know. Jvapes is in Prescott! They have the BEST juice, but the staff is very elitist and not very helpful. They contradict themselves a lot and don't seem to really care about their customers much.
    Sorry to hear that Deimos. I don't have that problem with the new store in Colo. Spgs.
    "The sexiest part of a woman is between her ears and the prettiest thing she can wear is a smile".



  6. #16
    Member
    Join Date
    Oct 2013
    Location
    Prescott, AZ
    Posts
    9

    Default

    Thank you all for your help! Agavehound, that's okay. I've just kind of resigned myself to it and I don't go to them for help anymore. Just enjoy their juice. Here is what I ordered from fasttech.com -

    1 x INNOKIN iTaste SVD Telescoping Variable Voltage E-Cigarette Mod / Battery Compartment
    1 x Authentic Samsung ICR18650-26F 18650 3.7V 2600mAh Protected Rechargeable Lithium Batteries 2-pack / with carrying case
    1 x Trustfire TR-006 3.0V/4.2V Li-ion Battery Charger for 25500 / 26650 / 26700 / 18650 / 16340
    1 x RDA Mini Rebuildable Dripping Atomizer (1.5ml) stainless steel / 3-airhole / 2.4O

    Hope it works out! I just want to live in "Vape Heaven!"

  7. #17
    Member
    Join Date
    Mar 2014
    Location
    Keller tx
    Posts
    1

    Default

    It depends what ohm resistance the coil is on the drip tank your thinking about getting also the protank 1 2 and 3 have that problem because of where they get their airflow from try getting a tank with adjustable airflow and if the coil is a 1.8 run it at 1.8 if it is a 2.2 don't run it past 4.0 if it a 2.5 don't run it past 4.2

  8. #18
    Full Member
    Join Date
    Aug 2013
    Location
    Truckin' across America
    Posts
    124

    Default

    You will actually want unprotected batteries as the SVD is a regulated mod.

  9. #19
    Super Member* Verified Member
    ECF Veteran
    bcollier9253's Avatar
    Join Date
    Nov 2013
    Location
    Indianapolis, Indiana
    Posts
    565
    Blog Entries
    5

    Default

    Quote Originally Posted by HughDaHand View Post
    Any mod or ego is really just a power source, it doesn't really care what kind of delivery device you put on it. You just need to keep in mind what resistance you are going to be running on it. The SVD won't fire anything below 1.5ohm so building a coil lower than that on a dripper won't work on it, but that gets risky anyways.
    I beg to differ. I was firing a 28ga.1.1ohmn nano microcoil in a PT2 on on my SVD with no problems. And that was at 14 watts. Huge vapor and flavor to boot!
    Would I recommend it, probably not since the SVD is not really designed for sub ohmn or near sub ohmn. That stuff is a whole nother realm.
    Last edited by bcollier9253; 03-14-2014 at 12:18 PM.

  10. #20
    Super Member ECF Veteran KenD's Avatar
    Join Date
    Aug 2013
    Location
    Stockholm, Sweden
    Posts
    926

    Default

    Quote Originally Posted by HughDaHand View Post
    Any mod or ego is really just a power source, it doesn't really care what kind of delivery device you put on it. You just need to keep in mind what resistance you are going to be running on it. The SVD won't fire anything below 1.5ohm so building a coil lower than that on a dripper won't work on it, but that gets risky anyways.
    Officially the SVD won't fire coils below 1.2 ohms (or was it 1.1?). Both of mine, however, will fire 0.9 ohm coils (at 0.8 it won't fire anymore). The device is still limited to 15 watts, so with a 0.9 ohm coil it will only use 3.7 volts even if you've set it higher. A 0.9 ohm coil is no riskier than a coil above 1 ohm.

    Sent from my GT-I9100 using Tapatalk

Page 2 of 3 FirstFirst 123 LastLast

Tags for this Thread

Bookmarks