Results 1 to 6 of 6
Like Tree5Likes
  • 1 Post By Steam Turbine
  • 3 Post By madqatter
  • 1 Post By Vapoor eyes er

Thread: Two very noobish questions!

  1. #1
    Full Member
    Join Date
    Oct 2013
    Location
    NY, USA
    Posts
    26

    Default Two very noobish questions!

    Hello folks, still very new to vaping and these forums as well, so forgive me if these questions seem very noobish or if they have already been answered (a search didn't turn up anything).

    First Question: Is it possible to over-charge and thus damage or destroy e-cig batteries? Specifically, I have 2 650 mah Halo Triton batteries (ego style) and I have several AW IMR 18650 and 18350 batteries that I can charge on an XTAR WP2. Just wondering if these batteries or ones like them have overcharge protection. The only time I ever seem to get to charge this stuff is at night when I go to sleep, so they will sit there for a good 7 hours on most nights.

    Second Question: I just got my first dripping atomizers (3.0 ohm from Volcano for my new Lavatube 2.5) and I have more coming in from smartvapes.com with are 3.0 and 1.8 ohm I believe. I've never used these before, so I want to know how I can clean these to get rid of the primer fluid and also in case I want to use a different juice on the same atomizer. Is there a special cleaning method or can I run these under water and then gently towel dry? Do I just dry burn them until everything is burned off (seems like the wrong thing to do)

    Thanks for any help!

  2. Advertisement
  3. #2
    Ultra Member ECF Veteran Steam Turbine's Avatar
    Join Date
    May 2013
    Location
    Montreal Quebec Canada
    Posts
    1,136
    Blog Entries
    5

    Default

    Question #1: The AW IRM battery themselves do not have any form of protection whatsoever but your XTAR charger does. The XTAR will stop charging them when they reach 4.2 volts. It is always a good idea to check if they are indeed at 4.2 volts when they come out of the charger, if they are lower or higher, your batteries could be damaged or there is something wrong with the charger. Same thing with your "eGo's" (although I think that they actually contain electronic protection) use them with the proper charger and the charge will stop once they reach 4.2 volts.

    Avoid cheap "dumb" chargers as you can seriously damage your batteries and/or charger.

    Question #2: As for your dripping atty's, I'll leave that for somebody who are familiar with them. I am not.

    EDIT: It is not a good idea to leave your battery unatended while they are being charged (although everybody does it)
    Last edited by Steam Turbine; 10-31-2013 at 01:42 AM.
    Enoch777 likes this.

    Because Smoke, is a Bad Vape!


  4. Advertisement
  5. #3
    Super Member Verified Member Enoch777's Avatar
    Join Date
    Sep 2013
    Location
    Midwest, USA
    Posts
    570

    Default

    Quote Originally Posted by Steve0311 View Post
    Do I just dry burn them until everything is burned off (seems like the wrong thing to do)
    You can remove the primer fluid by wadding up a tissue and blowing (hard) through the open end with tissue around the threads. Do this several times until it no longer leaves wet spots on the napkin.

    Here's an in-depth guide: How to fix the bad taste of new atomizers

    I've used the centrifuge method for cleaning liquid out of a cartomizer and it works surprisingly well.



    Cleaning is a bit different. I think the best way to do this would be to put them in a shot glass/container and pour in vodka or PGA. You want cheap stuff that is straight alcohol, no flavor or added sugar. Let it sit for 1 to 6 hours, then set them upside down with battery connection up on some towels and let air dry for 24 hours or so.

    Dry burning is great, I use this method on my RDA to clean the coil and it works very well. However I can visually see the coil and confirm that no liquid is collected on the deck by cleaning it by hand. The pre-built drippers are down in there and you can't exactly confirm that everything is gone, so you may not get a perfect clean. I don't see any reason why dry burning wouldn't work, though, but removing any excess liquid caught in the bottom is another story.

    Just make sure you can visually see the coil while you dry burn. It helps to gauge how hot the coil is getting because you *can* pop an atty by liberally applying this technique. Pulse fire until it gets red, then stop. If you keep pressing it while it's red hot you run the risk of breaking it.
    Last edited by Enoch777; 10-31-2013 at 02:19 AM.

  6. #4
    Ultra Member madqatter's Avatar
    Join Date
    Sep 2013
    Location
    Virginia
    Posts
    1,374

    Default

    Quote Originally Posted by Steve0311 View Post
    Is it possible to over-charge and thus damage or destroy e-cig batteries?
    This was ably answered above, but just to reiterate: Even with a good charger, it's a good practice to personally check your batteries for overcharge after you've taken them off the charger and rested them. Even a good charger could fail. I think all mod owners, not just mech owners, should have a multicharger and use it.

    Quote Originally Posted by Steve0311 View Post
    The only time I ever seem to get to charge this stuff is at night when I go to sleep, so they will sit there for a good 7 hours on most nights.
    This is, practically speaking, charging unattended. I would never recommend charging batteries unattended.

    Here are some good resources for info about mod batteries:
    http://www.e-cigarette-forum.com/for...es-part-i.html
    http://www.e-cigarette-forum.com/for...s-part-ii.html
    Rechargeable Batteries

    Quote Originally Posted by Steve0311 View Post
    I just got my first dripping atomizers.... I've never used these before, so I want to know how I can clean these to get rid of the primer fluid and also in case I want to use a different juice on the same atomizer.
    Check out the Ocelot's guide to dripping!

  7. #5
    Full Member
    Join Date
    Oct 2013
    Location
    NY, USA
    Posts
    26

    Default

    Awesome answers everyone, thanks a lot. This will help.

  8. #6
    ECF Guru* ECF Veteran Vapoor eyes er's Avatar
    Join Date
    Sep 2011
    Location
    Toronto, Ont.
    Posts
    11,001

    Default

    First Question: Is it possible to over-charge and thus damage or destroy e-cig batteries? Specifically, I have 2 650 mah Halo Triton batteries (ego style) and I have several AW IMR 18650 and 18350 batteries that I can charge on an XTAR WP2. Just wondering if these batteries or ones like them have overcharge protection. The only time I ever seem to get to charge this stuff is at night when I go to sleep, so they will sit there for a good 7 hours on most nights.
    You can buy the very best batteries and chargers and there's still no full proof guarantee they won't fail. Best to never overcharge or leave batteries charging unattended. Bad's batt Blogs posted by madqatter are an excellent read.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •