boiling atomizers, what to expect?

[ainako]

I boiled my first atomizer for the second time today and it somewhat worked, easier draw, better vapor output, etc. However I noticed I still noticed that there is black gunk looking stuff on the coil. My method of boiling is leaving it in boiling water for about 5 mins then running the atomizer through cold water just to cool it down enough so I can blow on it, I did this once. The first time I boiled it I set it in the boiling water for 3 mins, ran under a cool tap and blew on it. Did that 3 times and again nothing ever came out except water. I have read some people blowing out the atomizer after boiling it and they get the gunk out. I too would like to get that gunk off there.

[MuddyBears]

You could try a mild acid solution to loosen up said "gunk".. Any soda will work, just let it sit for about 10 mins then blow, rinse, blow!

[316lvm]

Or you could use the dry burn method.

[Shaka]

I don't boil, use chemicals, mouthwash, denture cleaner, etc. I just use Highping's method on an as need basis (not routinely).

My Atty Resurrection Method