Nemesis vs k100
Results 1 to 8 of 8

Thread: Nemesis vs k100

  1. #1
    Member
    Join Date
    Sep 2013
    Location
    Kennesaw
    Posts
    11

    Default Nemesis vs k100

    I'm just getting into mech. Mods. I ordered a k100, but I came across the nemesis today, and I was just wondering if anyone has used both of them and could tell me which they prefer? Maybe pros and cons? Thanks, guys !

  2. #2
    Super Member Verified Member
    ECF Veteran
    jarreddizzle's Avatar
    Join Date
    Aug 2013
    Location
    Oxnard, CA, USA
    Posts
    310

    Default

    My first mechanical mod was the K-100. Great starter-mod, simple and easy to use with a relatively low MSRP. Performance wise, you get what you pay for.
    Now, I have 3 Nemesis, one of which is a Clone. Not ashamed to admit it, I bought it to see the difference between the Legit and Clone. Now see, this is where the line get fuzzy, they both (legit and clones) are solid performers. However, there are minute details to which the legit ones are better. small things, but aesthetic and functional. The legit Nemesis are ready to go, "perfect" in my opinion to use the second you get them. The clones on the other hand, well they need some work with pliers, and maybe sandpaper. I fully support the original mod designer and continually buy directly from Atmomixani, and as I said the clone was only a tester, and now a beater setup.
    Quote Originally Posted by blowingclouds View Post
    Too those lazy people who don't want to read, you might learn something if you read.

  3. #3
    Senior Member Verified Member sigtausteve's Avatar
    Join Date
    Sep 2013
    Location
    Lawton, OK, USA
    Posts
    169

    Default

    depends on if the Nemesis is a clone or now. there are small, yet slight differences. The nemesis clone is a really good mod and an extremely cheap price compared the the real nemesis mod. (if it is under $100, its a clone). The K100 is also a clone of the Empire mod. The difference between the clones and the real ones is the quality of the work. The REAL mods are meticulously designed for practical and most efficient use. The tubes and threads are usually handmachined by an "expert?" machinist and you can tell that by how they are crafted. They are stand alone works of art (serial numbered as well). The clones are just that, massed produced for profit. The more they can put out the more profit they will get. Because they are massed produced they are cheaper. And the quality control is not as high. Bottom line is you get what you pay for. It you by it and it works for you, go for it. There are those purists out there that would not by a clone for the reasons stated above. up to you.

    Real- By Atmomixani : Nemesis matte
    Clone- $29.08 Nemesis Mod / E-Cigarette Battery Compartment - stainless steel / with telescopic pin at FastTech - Worldwide Free Shipping
    Real- The Empire PV Mod
    Clone- Kamry K100 Body - Mt Baker Vapor - Electronic Cigarettes
    "The tree of liberty must be refreshed from time to time, with the blood of patriots and tyrants." -Thomas Jefferson

  4. #4
    Super Member Verified Member
    ECF Veteran
    jarreddizzle's Avatar
    Join Date
    Aug 2013
    Location
    Oxnard, CA, USA
    Posts
    310

    Default

    Quote Originally Posted by sigtausteve View Post
    depends on if the Nemesis is a clone or now. there are small, yet slight differences. The nemesis clone is a really good mod and an extremely cheap price compared the the real nemesis mod. (if it is under $100, its a clone). The K100 is also a clone of the Empire mod. The difference between the clones and the real ones is the quality of the work. The REAL mods are meticulously designed for practical and most efficient use. The tubes and threads are usually handmachined by an "expert?" machinist and you can tell that by how they are crafted. They are stand alone works of art (serial numbered as well). The clones are just that, massed produced for profit. The more they can put out the more profit they will get. Because they are massed produced they are cheaper. And the quality control is not as high. Bottom line is you get what you pay for. It you by it and it works for you, go for it. There are those purists out there that would not by a clone for the reasons stated above. up to you.

    Real- By Atmomixani : Nemesis matte
    Clone- $29.08 Nemesis Mod / E-Cigarette Battery Compartment - stainless steel / with telescopic pin at FastTech - Worldwide Free Shipping
    Real- The Empire PV Mod
    Clone- Kamry K100 Body - Mt Baker Vapor - Electronic Cigarettes
    I'm not a purist lol I was tricked into buying an Oni and then I ended up with a rebranded clone!
    Quote Originally Posted by blowingclouds View Post
    Too those lazy people who don't want to read, you might learn something if you read.

  5. #5
    Full Member Verified Member
    Join Date
    Sep 2013
    Location
    Orange County, CA, USA
    Posts
    23

    Default

    go with a legit all brass nemesis!!! you will not regret it at all!

  6. #6
    Super Member Team ECF (folding@home)
    Verified Member
    Supporting Member
    Texaslimo's Avatar
    Join Date
    Sep 2013
    Location
    TX
    Posts
    753

    Default

    I personally prefer the Nemesis just because it is an exceptionally well designed piece. I particularly enjoy the adjustable pin and ease of kick installation and removal of the Nemesis. The K100 has the advantage of being a telescoping device so you can use any size battery without having to carry any extra parts. The Neme has great support. I would also like to point out that both mods perform very well!

    Vaping will save you money. In other news, record sales of beachfront property propel Arizona economy to new heights

  7. #7
    Member
    Join Date
    Sep 2013
    Location
    Kennesaw
    Posts
    11

    Default

    Quote Originally Posted by sigtausteve View Post
    depends on if the Nemesis is a clone or now. there are small, yet slight differences. The nemesis clone is a really good mod and an extremely cheap price compared the the real nemesis mod. (if it is under $100, its a clone). The K100 is also a clone of the Empire mod. The difference between the clones and the real ones is the quality of the work. The REAL mods are meticulously designed for practical and most efficient use. The tubes and threads are usually handmachined by an "expert?" machinist and you can tell that by how they are crafted. They are stand alone works of art (serial numbered as well). The clones are just that, massed produced for profit. The more they can put out the more profit they will get. Because they are massed produced they are cheaper. And the quality control is not as high. Bottom line is you get what you pay for. It you by it and it works for you, go for it. There are those purists out there that would not by a clone for the reasons stated above. up to you.

    Real- By Atmomixani : Nemesis matte
    Clone- $29.08 Nemesis Mod / E-Cigarette Battery Compartment - stainless steel / with telescopic pin at FastTech - Worldwide Free Shipping
    Real- The Empire PV Mod
    Clone- Kamry K100 Body - Mt Baker Vapor - Electronic Cigarettes

    Indeed, I am not a purist. Haha. I like to think that if A clone can have a product that will vape and perform even ALMOST as good as the real thing, then the real deal may not be as high line as it comes off. Haha. Ie: I have had a real Trident and a Clone trident. I sold the real thing because it wasn't any substantial difference, they were both equivalent.

    I think I'm going to end up buying the k100 AND the nemesis clone. For kiks and giggles !

  8. #8
    Member
    Join Date
    Sep 2013
    Location
    Kennesaw
    Posts
    11

    Default

    Thanks, lots of info to consider!

Bookmarks