Some evic mod questions
Results 1 to 9 of 9
Like Tree1Likes
  • 1 Post By sdennislee

Thread: Some evic mod questions

  1. #1
    Full Member
    Join Date
    May 2013
    Location
    NEPA
    Posts
    60

    Default Some evic mod questions

    Couple of questions for you guys.

    Can the top piece above the head be screwed off so something like a kayfun can be screwed on and mounted flush?

    Also where can I get a smaller body tube that will fit the 18350 battery?

    Anybody mod theirs like this?

    Jason

  2. #2
    Ultra Member Verified Member
    ECF Veteran
    Supporting Member
    Bill's Magic Vapor's Avatar
    Join Date
    Feb 2013
    Location
    USA
    Posts
    2,862
    Blog Entries
    2

    Default

    You can get different cones for the evic, but you should be able to screw a kayfun on and have it fairly flush, if not perfectly flush. The 510 connection and the top of the cone are almost in sync. Some Kayfun allow you to control the connection and may be perfectly flush for good looks. Also, the evic has many after market tubes and cones. Mine have Kir Fanis tubes and look very nice. I'm not crazy about the slope of the cone on the evic, but it's ok. There are flat top wide cones, though, that don't taper, if you can find them in stock. The evic is a nice APV, though at only 5 volts, a little under powered. Best display around, I think. My two cents. YMMV. Good luck!
    Three were given to the Elves, immortal, wisest, and fairest of all beings. Seven to the Dwarf lords, great miners and craftsmen of the mountain halls. And nine, nine Rings were gifted to the race of Men, who above all else, desire variable power.

  3. #3
    Super Member Verified Member
    ECF Veteran
    Supporting Member
    sdennislee's Avatar
    Join Date
    Nov 2012
    Location
    Alaska
    Posts
    650

    Default

    Here is what the eVic looks like without the end cap
    photo evic.jpg

    Here is a link to square end caps for the eVic
    https://www.cignot.com/product_p/evc-acy-all.htm
    US Navy Vet, Liberty Tree Member of Oath Keepers, NRA & VFW Life Member, Alaska EMT.
    http://www.casaa.org/Become_a_Member.html


  4. #4
    Super Member Verified Member
    ECF Veteran
    Supporting Member
    sdennislee's Avatar
    Join Date
    Nov 2012
    Location
    Alaska
    Posts
    650

    Default

    Here are a couple other add ons that work with the eVic
    510 to eGo Adapter with Well This has a floating center pin and will help protect the 510 threads on the eVic.
    Tank Airflow Controller

    This how they look on my eVic
    photoevic5.jpg
    US Navy Vet, Liberty Tree Member of Oath Keepers, NRA & VFW Life Member, Alaska EMT.
    http://www.casaa.org/Become_a_Member.html


  5. #5
    Ultra Member Verified Member humpstyles's Avatar
    Join Date
    Dec 2013
    Location
    Pennsylvania
    Posts
    1,475

    Default

    Which one of these would match the standard factory chrome tube that the eVic comes with?

    https://www.cignot.com/product_p/evc-acy-all.htm

    I just bought one off of eBay from someone who bought it directly from Joyetech, and when I got it, it was a much lighter silver color than the factory tube. It also seemed much more 'brushed' compared to my tube.

    I feel as if the "Stainless Brushed" looks like it would match it, but then again, the one I currently have is more brushed than the factory tube...Would it be the "Stainless Bright"?
    ...cooler than a polar bear's toes...





  6. #6
    Super Member Verified Member
    ECF Veteran
    Supporting Member
    sdennislee's Avatar
    Join Date
    Nov 2012
    Location
    Alaska
    Posts
    650

    Default

    Quote Originally Posted by humpstyles View Post
    Which one of these would match the standard factory chrome tube that the eVic comes with?

    https://www.cignot.com/product_p/evc-acy-all.htm

    I just bought one off of eBay from someone who bought it directly from Joyetech, and when I got it, it was a much lighter silver color than the factory tube. It also seemed much more 'brushed' compared to my tube.

    I feel as if the "Stainless Brushed" looks like it would match it, but then again, the one I currently have is more brushed than the factory tube...Would it be the "Stainless Bright"?
    The Stainless Bright is a chrome like finish, the Stainless Brushed is is more of a silver brushed.

    I've never seen the chrome battery tube from Joyetech so I can't compare it for you. I have 2 eVic one is black from Ovale and the other is a silver with a brushed/satin finish from Joyetech.

    The Joyetech website shows black and silver tubes but not chrome so I couldn't compare there either.

    I did buy and after market tube set in chrome and the stainless bright end cap from cignot matches it nicely.

    Sorry I couldn't be of more help
    dv13 likes this.
    US Navy Vet, Liberty Tree Member of Oath Keepers, NRA & VFW Life Member, Alaska EMT.
    http://www.casaa.org/Become_a_Member.html


  7. #7
    Member joshneedham's Avatar
    Join Date
    Feb 2014
    Location
    Chicago, IL
    Posts
    14

    Default

    I bought the joyetech 'brushed' straight evic top piece from the cignot b&m in my town for $4, and a green 18350 body tube online. I found a great deal on the tubes; actually they are 18350 tubes for the smoktech sid, but they are COMPLETELY interchangeable with the evic head. Picked it up from hoosierecig.com for $8.49 and that includes the battery cap. Most site do NOT include this piece. They have black, pink, purple, blue, orange, silver, and green in 18650, 18500, and 18350 sizes. I'll be ordering more colors, the fit is perfect and there is no gap by the control ring like on some other aftermarket tubes. Here's a pic of my current setup: image-5.jpg

    Quote Originally Posted by dropped9 View Post
    Couple of questions for you guys.

    Can the top piece above the head be screwed off so something like a kayfun can be screwed on and mounted flush?

    Also where can I get a smaller body tube that will fit the 18350 battery?

    Anybody mod theirs like this?

    Jason

  8. #8
    Member
    Join Date
    Feb 2014
    Location
    FL
    Posts
    9

    Default

    For the top caps I recently bought a matte silver one from myfreedomsmokes.com for 4usd.

    As for the tubes, I'm currently eyeing the kir fanis telescoping mod. They have the polished ss in stock atm on gr-mods.com, waiting for the brushed ss. Another one is BoD by Leo, also a telescoping tube.
    Last edited by vaquino41981; 02-21-2014 at 08:15 AM.

  9. #9
    PV Master Verified Member
    ECF Veteran
    Supporting Member
    Rickajho's Avatar
    Join Date
    Apr 2011
    Location
    Boston MA
    Posts
    8,148

    Default

    Good Prophets has the 18350 battery tubes with end cap.

    eGo-T/eVic MOD Tube 18350

    Matte black or silver $7.99

Tags for this Thread

Bookmarks