The Buzz Varivolt , support and Talk

[Wharf Rat]

Nah, you can't fool me........ I know better !!!!

[Ruppy]

Well after 3 buzzes and two infinitys I finally broke the wire off of one LOL. Some solder and shrinkwrap fixed it right up. Hits better than it has in ages. Considering I am not very kind to my PVs its amazing it took this long to break one.

Carry on!

[Chris Braddock]

what is the cu off time on the original buzz?like lavatube shuts down after 10sec provari 16 sec?
whats the buzz/

[908Tracy]

No cut off time on the Buzz!!!! That makes me, and alot of others very happy buzzards!

[Chris Braddock]

yes that will make me happy to as i will vape my first buz tonight

[908Tracy]

Awesome Chris! Be sure to let us know what you think ok?

[Chris Braddock]

just got a used buzz last nih and having trouble as in the 510 connection thier is a screw which i think is doing something to not let me vape if i tighten down the carto the light turns red and wont vape if i unscrew it it will start to vape but it to loose i dont like it that way any idea how i can fix this problem

[Bovinia]

Chris, the screw needs to be snug in order to help protect juice from getting under the cap, and to complete the connection to get power to your carto. You might need a plastic spacer or tiny o-ring to put under the screw. You would need to follow the instructions on the sticky " Replacing the top cap" to make sure the wire under the cap doesn't come loose.

Alternatively you could get a 510 to 510 sealed extender like this one V2 510 Shorty Extension Sealed

[markfm]

If a top cap is a bit loose, this might be effective:

A small piece of standard plumbing teflon tape, cut to half width, covering a fraction of the tc threads. There is still more than enough contact for the ground to pass cleanly, honestly it could probably be a full wrap since the thread will bite through the tape.

My 801 tc is now snug, but can definitely be removed without a problem.

As when replacing a tc, remove the batteries and slightly loosen the tc screw before unscrewing the tc to do this.

Hopefully someone else will find this useful

[Bovinia]

Thank you Mark