Low bridge 801's

[Tone]

RenaissancePuffer...

That certainly looks quite similar to this atty here - almost identical inside. Perhaps I should just bite the bullet and order a few of them at $17 each.

I'm really alright with spending $17 on them if the 6 month warranty holds up. It's actually a better deal than spending $8 on an atty that will last me 1-2 weeks. I'd probably buy 2 of them, that way if one craps out I can have the other to use while I wait for the warranty exchange to complete. In theory, this almost seems like a sound plan.

My only concern is whether they'll be around in the mid to long term to honor the warranty. I kind of hate relying on a single vendor for something so specific and essential. =]

Thanks for taking the time to post the image, that was helpful.

If its the janty model you like, go with the Joyetech they produce models for Janty and im sure you can get it cheaper then that.

[Synthnadz]

Interesting Tone - the plot thickens.

I just went to the Joyetech website, and found this image:



I'm thinking that these are probably the 801s, but I've sent them an email to see if I can get some more specific information. I want to know for sure that these are in fact the Kissbox attys before buying a pile of them. Their website doesn't exactly get into much detail.

Thanks again!

[Hellen A. Handbasket]

I recently got some of the 302 from Joye. Really, they are great atomizer. Wish I would have picked up 50 of them!!

They are slightly shorter than an 801 atomizer in length, 2 holes at the threads and a good draw. The 801 cartridge doesn't work on them very well (buy carts if you get them or use the old hard tip RN4072 cartridges).

[Sun Vaporer]

Tone...

From what I've read, the RN4072 attys are out of production. This is the reason I suspect that the Vaprlife attys may be something else, even if the description is so similar.

What an exhausting puzzle this has become.

Synthadz--the RN4072 is still alive and kicking--the real problem is that many Suppilers have stopped selling them for what ever reason which is a shame

See electronic cigarette Manufacturer exporting direct from Guangdong China

Sun

[Synthnadz]

Interesting, Sun Vaporer....

I really wish I actually *knew* which atty I was looking for though. I'm kind of conceptually stranded right now, in all truth.

Is it a low bridge 801? A Joye 302? An RN4072? I don't really know. I just know that I've hated the BE112 as well as the high bridge 801 I tested from Rocky Mountain Vapor. Both of them were like sucking a golf ball through a garden hose, and the small surface area of the actual bridge in both seemed to promote nothing but flooding. I had a wretched experience with each of them.

I'm looking for a smooth, easy draw and a low, flat, rounded bridge that's great for dripping - that's about the extent of my knowledge right now.

I have 10 low bridge 801s coming from Totally Wicked, and 7 low bridge 801s coming from Eastmall, but I'm not certain that either of these is going to give me what I'm looking for.

So, I'm considering hunting down these RN4072s as well as trying a Joye 302 (which I think is the same as the Jany Kissbox atty). What way to turn?

[Sun Vaporer]

Interesting, Sun Vaporer....

I really wish I actually *knew* which atty I was looking for though. I'm kind of conceptually stranded right now, in all truth.

Is it a low bridge 801? A Joye 302? An RN4072? I don't really know. I just know that I've hated the BE112 as well as the high bridge 801 I tested from Rocky Mountain Vapor. Both of them were like sucking a golf ball through a garden hose, and the small surface area of the actual bridge in both seemed to promote nothing but flooding. I had a wretched experience with each of them.

I'm looking for a smooth, easy draw and a low, flat, rounded bridge - that's about the extent of my knowledge right now.

I have 10 low bridge 801s coming from Totally Wicked, and 7 low bridge 801s coming from Eastmall, but I'm not certain that either of these is going to give me what I'm looking for.

So, I'm considering hunting down these RN4072s as well as trying a Joye 302 (which I think is the same as the Jany Kissbox atty). What way to turn?

Synthnadz--the low bridge that you are looking for is the RN4072---it has an arch shaped, very low profile bridge that is also very thick. All the rest of the 801 styles have a triangle shaped bridge---some sticking up way higher then others.


Sun

[Synthnadz]

Thanks Sun...

One question though: The Janty Kissbox atomizer (there's actually a picture of one in this thread) seems to have the low, thick, 'rounded' bridge that I'm looking for as well, but this is a Joye 302, right?

[Sun Vaporer]

Thanks Sun...

One question though: The Janty Kissbox atomizer (there's actually a picture of one in this thread) seems to have the low, thick, 'rounded' bridge that I'm looking for as well, but this is a Joye 302, right?

Synthnadz--that is as close to an RN4072 as you are going to find absent ordering them from China. The 302 is still a little high and pointy compared to an RN4072, but it is as close as you are going to get.

Sun

[Synthnadz]

Sun,

I'd be happy to order from China, but I still haven't found a straight-forward source to buy them from. Hell, I already have 7 801s coming from Eastmall that I probably don't want - so I'm not at all opposed to 'ordering in'. Show me a shopping cart and I'll happily fill it with RN4072's.

[Sun Vaporer]

Sun,

I'd be happy to order from China, but I still haven't found a straight-forward source to buy them from. Hell, I already have 7 801s coming from Eastmall that I probably don't want - so I'm not at all opposed to 'ordering in'. Show me a shopping cart and I'll happily fill it with RN4072's.

Synthnadz--Just hit the contact button with First Union on the link provided and request a quote---I did it.

Sun