Low bridge 801's

[Synthnadz]

Thanks Sun...

I already did just that when you first posted the link. Let's see if I get a reply.

All the best,

...D

[Synthnadz]

The best low bridge 801's I've found - and I've tried almost all of them - are from Eastmall.com. The bridges look almost identical to a Joye 302 or a Kissbox, but they have 4 holes and a really smooth draw.

2nd place is the BE112 from Bestecig. These perform very much like the Eastmall 801's, but the bridge is not quite as wide.

The TW 801's (which are RN4072's) and the RMV high bridge 801's were horrible for me. Total flooding machines - not recommended.

After spending a few hundred bucks and countless hours of testing, I've finally found good performing 801's. Now let's see how they hold up.

[ainako]

I would like to add again that in my experience, the best ones are the 302 atomizers from myvaporstore or the eastmall/ecigmall 4-hole. The only difference between them is that the the 4 hole has an easier draw. Personally I like the draw of the 2-hole 302. The ones from totallywicked would be fine if only they didn't constantly flood and leak, this happened to me constantly and is VERY annoying when you reach in your pocket to grab the sucker and you are greeted with a hand full of juice and a stain on your pocket. Never had issues of flooding or leaking with the first 2 atomizers mentioned though. Live and learn I suppose =\

[jboze]

I'm so glad that I found this thread. My high bridge DSE801s were giving me headaches to say the least! You guys are an excellent source of knowledge.

Too bad Eastmall has that stupid $50 minimum order requirement.

[deewal]

My two Janty Kissbox Classics have only 3 threads. They also use Carts that have little vertical ridges around the bottom of the black mouthpiece. Unfortunately these Janty Carts tend to lose their shape after the first use so refilling is often a no go as the cart won't go back in the atty. All the 801's and RN4072'S I've got have 4 threads.
The TW 801's do not have a warranty because they usually die very quickly and leak. I don't have a good camera or i would take pictures of all my atty's inside and out. None of mine apart from the Janty's have anything written on them at all.
Also i've found that an 801 or RN4072 will work in a Janty Stick but once used in it they will not work with any other Battery. That includes the Janty Passthrough. I would like the Original 1 hole RN4072 but they seem to have gone. Their now all 2 hole.
Let's face it, their all hit and miss.

[ainako]

It seems that myvaporstore stocks low-bridge atomizers now. Anyone know how they compare to the 302s? Can you use the 302 cartridges with them?

[jncallahan]

I think these might actually be RN4072's. They have a low bridge and no markings on the atomisers (801's all have SLB and some other numbers etched onto them). The cartridge on RN4072's is a bit longer than the 801's. I've found the RN4072 does a good job of draining cartridges if you use the right ones, unlike the high bridge 801's. For me the 801's are very good for dripping, no good for carts..

I'm finding there is a lot of (sometimes confusing) info on the various iterations of the dse801 attys and carts.. I received my kit about a week ago and contrary to all of the wonderful reviews I read about this thing, It rather sucks compared to my 510 and even my 901. With a full cart I got maybe 3 or 4 good hits then nothing! The attys that came with the kit appear to be low bridge and I think that is the problem. It appears that the bridge is just not penetrating the filler enough to promote proper wicking. Rather than give up completely(as I had also sunk substantial $ into 3 extra batts and a butt ton of carts) I ordered 2 more attys from a different supplier. One was a supposedly new and improved low bridge 801, and the other was a Joye302 atty. I got the same results with the new 801 atty - pretty much nothing! The 302 atty at least works I think due to the fact that it is about 1/8 inch shorter, thus allowing the cart to get farther into the atty. But the vapor and throat hit are still inferior to my 510 and 901. At this point I don't know whether I should keep experimenting with attys and carts or not. I have already ordered thread adapters so I can use my 801 batts with my other e-cigs, so not all is lost. Also I read a post on here somewhere that there are different length carts for the high and low bridge attys. Is this true? I have not found any suppliers that make any differentiation as to what style atty their carts are for. At this point if I try anything I think I will try a high bridge and see if I get any better results.

[JDSupreme]

I looooooovvvvvvvve low bridge 801attys on 510 PT. Great hit

[Raven1]

It seems that myvaporstore stocks low-bridge atomizers now. Anyone know how they compare to the 302s? Can you use the 302 cartridges with them?

Yup, that is where I get my low-bridge 801 atties: myvaporstore. They ship in 2 or 3 days and have good prices as well. Great liquid too! I highly recommend them.

[JDSupreme]

I get mine from litecig usa. like 7.99 and at my door in 3 days. Liquid is not the best tho.