+ Reply to Thread
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 32
How bout this design for a cartridge... in Modding Forum; Originally Posted by Somoney PuffnStuff, you diagram is great. it would be most effective if you had a way for ...
  1. #21
    Senior Member
    Join Date
    Apr 2008
    Location
    Netherlands
    Posts
    178

    Default

    Quote Originally Posted by Somoney View Post
    PuffnStuff, you diagram is great. it would be most effective if you had a way for the liquid to touch the atomizer directly though. this desgn can drip along the walls, or if upsode down, through the mouth piece. Is it is now, you still need a sponge to transfer your drip to the atomizer.
    Then you don't need the pump anymore.
    I made a cartridge with a very small piece of cotton months ago. The liquid goes into the back of the cartridge and because there's only a small hole it doesn't drip out but gets sucked out by the cotton. So not really a cottonless cartridge but the liquid gets used up much better and the cotton is always wet.








  2. Advertisement
  3. #22
    Full Member
    Join Date
    Oct 2008
    Location
    La Verne, California (US)
    Posts
    27

    Default

    my original plan for the tank design was actually for the drippers out there. So many people have gone to dripping cause the carts don't work as well as they like. If the switch on the tank just put out a drop of liquid you could drip withough having to pull the cart and dripp every few puffs.

    You could simply hold the cig upright, hit the drip button a couple times then start puffing, repeat as needed.

    although I like the seperated compartment idea where the cotten draws liquid out.

    what the hell is that fuzzy white stuff actually made of anyways?

  4. #23
    Super Member ECF Veteran
    Join Date
    Oct 2008
    Posts
    301

    Default

    Hehe just wanted to say I'm glad to see that my thread is still going Hopefully something will come of it someday!!

  5. #24
    Super Member ECF Veteran
    Join Date
    Aug 2008
    Location
    Sparta, Greece
    Posts
    331

    Default

    Alternative cartridge design . Been using it on my pen style ever since. Not really sure how suitable normal cigarette filter and packaging plastic are in sense of chemicals that they give off over time.

  6. #25
    Ultra Member ECF Veteran K-Sound Krew's Avatar
    Join Date
    Nov 2008
    Location
    Worcester
    Posts
    1,020

    Default

    Pens are so much better, but can't we get a round cart?
    I feel like Mimi Vandoren, whoever that is

  7. #26
    Super Member ECF Veteran Dr. Russell Fell's Avatar
    Join Date
    Oct 2008
    Location
    Florida
    Posts
    526

    Default

    Quote Originally Posted by yo han View Post
    Then you don't need the pump anymore.
    I made a cartridge with a very small piece of cotton months ago. The liquid goes into the back of the cartridge and because there's only a small hole it doesn't drip out but gets sucked out by the cotton. So not really a cottonless cartridge but the liquid gets used up much better and the cotton is always wet.







    I think I get what your picture is illustrating - did you cut off the end of the cart and push it into another so that the fibers are inside a little "capsule" created by the cart and the cart end that was cut off and pushed into it?
    I hate phantom spaceman.

  8. #27
    Senior Member
    Join Date
    Apr 2008
    Location
    Netherlands
    Posts
    178

    Default

    I cut off the end of one cart and made a hole in that part (can be seen in the bottom picture) and glued it into the other cart. The cart can be filled through the hole so the lower part of the cart contains pure liquid, no cotton. Finally you put a small piece of cotton inside the top part of the cart which transfers the liquid to the atomizer.

  9. #28
    Inactive Supplier ECF Veteran
    Join Date
    Nov 2008
    Location
    U.S.
    Posts
    360

    Default

    Wow.. you guys are creative. I am glad to see that everyone has such good ideas. It just proves that we are in a primitive stage, and I get excited to think of what the future is going to bring!

    I was thinking of a pressurized system myself.. Maybe one that would release liquid onto an atomizer with an improved wick system, operated by the vacuum of someone inhaling from the mouthpiece. Kinda hard to put into words.. hopefully you guys get the general picture, if not, then sorry for being horrible at describing things. haha

  10. #29
    Member
    Join Date
    Dec 2008
    Location
    Portland, Oregon
    Posts
    8

    Default

    Hey Everyone!,
    First post here.. I just got my NPRO last night, charged 'er up, and started enjoying it immensly. Today, I'm at work and there's almost no "pull" or moister coming out through the NPRO..? I've briefly been reading some other posts, but haven't found my answer.

    The website, njoy.com, says these cartridges last up to 2 packs worth. Well, it's only lasted maybe a couple cigarettes worth.

    Do I need to buy liquid or something? I've been seeing that a lot. I just need to know why I'm not getting anymore more vapor after only a limited amount of use. Thank you - I'm trying not to light up a smoke, it's been 24 hours since my last cigarette, but my NPRO isn't working!!! HELP!

  11. #30
    Forum Supplier ECF Veteran Jaaxx's Avatar
    Join Date
    Oct 2008
    Location
    Atlanta, GA
    Posts
    514

    Default

    yo han,

    Your idea is almost exactly what I've been thinking about. A resevoir with liquid underneath a small bit of wadding.

    I wondering how to make it easier to fill. And wondering if a small piece of wick in the resevoir's hole would make it more efficient.

    hmmm....... still waiting on my kevlar "rope" to arrive.

+ Reply to Thread
Page 3 of 4 FirstFirst 1234 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

SEO by vBSEO