Provari v2 w/ boge 2.0?

[Rudy956]

Well yesterday I received my provari v2 from provape (very solid mod btw). Is the amp limit on the provari v2 3.5 amps? The reason I ask is because I swear I can not get my boge lr past 5 v and even at 5v I sometimes get an e2 error and I have to lower the voltages. I have had to bring the voltages down to 4.7 and even then it gives me the same error e2. I have tried other cartomizers and I still get the e2 error.. Did I get a lemon or?

Edit: I also get an e1 error as well

[speedemon]

Are you juiceing up your cartos well? Also check your cartos with your vari see what the true ohms are.Sometimes if you don't have enough juice in them it can do that.Also i would not run a carto that hot at 1st let them break in a little.I can run 2.0 dc cartos at 5 volts and higher without issue on v2 varis.Not sure on boge though i only have 1 left suppose to be 2.0 ohm but meters out at 1.8 so can't crank it up to 5v thats to much.

[jkmtwo]

5v on a 2.0 is going to be hot as all get out, but I find it burns the juice. But I can crank my 1.5 dccs up to 5v, so I would say 2 should crank up to 5v.

[mwa102464]

The answer to your question is = YES the V2 has a 3.5Amp limit switch Nocashflow,, I would also think that around 3.7v - 4.6 would be the sweeter spot I would take a Boge 2ohm Carto, there really not meant to be ran @ 5v but the 3ohm Boge Carto is a much better one to use @ 5v

[jkmtwo]

3 ohm SC Boges perform spectacular at 5v, I'm vaping one right now, quite enjoyable....

[Rudy956]

The answer to your question is = YES the V2 has a 3.5Amp limit switch Nocashflow,, I would also think that around 3.7v - 4.6 would be the sweeter spot I would take a Boge 2ohm Carto, there really not meant to be ran @ 5v but the 3ohm Boge Carto is a much better one to use @ 5v

I vape my reo grand at 27 watts and I like the warmth of the vapor. Now I know the provari is not gonna give me 27 watts as it does not state it. But I should be able to get 6 volts on a boge 2.0 cartomizer since 6/2 is still 3 amps and its not even giving me 3 amps. Now I dont mean to bash on this pv by any means but I thought I would be able to vape @ 18 watts all day without any problems but I guess I was wrong .

[EricHill78]

2.0 boges are great on the v2 in a pinch. It tastes great to me at like 4.2 there is no reason to go high on them.

[Rudy956]

2.0 boges are great on the v2 in a pinch. It tastes great to me at like 4.2 there is no reason to go high on them.

There is a reason for me like I said I would prefer to be vaping at 18 watts . The only reason I didnt get a 6v pv was because some juices taste better at lower wattage.

[jkmtwo]

Most pvs I've seen of this sort are capable of no more than 15 watts, I'm thinking buzz pro, and some box mods.

[AaronY]

Thanks for pointing that out. I am a 50 watts or higher vaper. That sucks that you can't even get 5v on a boge LR. That sucks Guess I am glad I had second thoughts about the provari.