Problem with kanger protank II and provari
Page 1 of 3 123 LastLast
Results 1 to 10 of 23
Like Tree6Likes

Thread: Problem with kanger protank II and provari

  1. #1
    Ultra Member Verified Member
    ECF Veteran
    KurrptSenate's Avatar
    Join Date
    Oct 2013
    Location
    PA
    Posts
    2,184

    Default Problem with kanger protank II and provari

    I was ecstatic to receive my provari and SVD yesterday in the mail. Naturally, this means I vaped a bit more than usual. After enjoying my mtbakervapors root beer float for a while I started to get a Lo warning from the provari. The tank kept flooding. I cleaned out everything multiple times but the problem persisted.

    I decided to call it quits till I could get some new heads.

    Today I purchased 5 replacement heads and an additional pro tank II. I changed the head on the old tank and fired up the provari. Shortly after, a persistent E1 warning popped up. I tried the same tank on the SVD and had no problems at all. I put the new tank on the provari with no problems.

    I'm not sure why the old tank won't work on the provari any more but will work on the SVD. Anyone know what I should do?

  2. #2
    Super Member ECF Veteran Kuma79's Avatar
    Join Date
    Aug 2013
    Location
    United States
    Posts
    315

    Default

    What is the old tank reading on the Ao setting?
    Provarinati Ursus


  3. #3
    PV Master ECF Veteran stevegmu's Avatar
    Join Date
    May 2013
    Location
    mistake by the lake
    Posts
    5,028

    Default

    Lo isn't a fault. It is the menu option to turn on or off the light. The ProVari has certain protection circuitry to prevent a shorted atomizer from firing and causing a massive explosion. Apparently the SVD does not.

  4. #4
    Ultra Member Verified Member
    ECF Veteran
    KurrptSenate's Avatar
    Join Date
    Oct 2013
    Location
    PA
    Posts
    2,184

    Default

    The old tank was reading all over the place. Normally 2.6

  5. #5
    Super Member ECF Veteran Kuma79's Avatar
    Join Date
    Aug 2013
    Location
    United States
    Posts
    315

    Default

    Unless you have the volts cranked all the way up i cant see where that would be the problem. Maybe its a bad ground?
    Provarinati Ursus


  6. #6
    Ultra Member Verified Member
    ECF Veteran
    KurrptSenate's Avatar
    Join Date
    Oct 2013
    Location
    PA
    Posts
    2,184

    Default

    Yesterday it was flooding and wouldn't allow me to take a cape unless I switched to the ego twist. The flavor was over the top to a ridiculous extent that I gave up for the rest of the night.

  7. #7
    Ultra Member Verified Member
    ECF Veteran
    Supporting Member
    Preloader's Avatar
    Join Date
    Sep 2013
    Location
    Oakland, CA
    Posts
    1,038

    Default

    Lo is also a reading you get when you go to Ao to read the resistance of an atomizer that has a short. Lo meaning "low" resistance, or short.


  8. #8
    Super Member ECF Veteran Kuma79's Avatar
    Join Date
    Aug 2013
    Location
    United States
    Posts
    315

    Default

    Quote Originally Posted by Preloader View Post
    Lo is also a reading you get when you go to Ao to read the resistance of an atomizer that has a short. Lo meaning "low" resistance, or short.
    This is what I originally thought too but considering he said that he used two different heads it seems unlikely. Possible but unlikely.
    Provarinati Ursus


  9. #9
    Ultra Member Verified Member
    ECF Veteran
    KurrptSenate's Avatar
    Join Date
    Oct 2013
    Location
    PA
    Posts
    2,184

    Default

    It was spitting out Lo when checking Ao. Looked weird to me too. If I tried to cape after that I'd get an E1

  10. #10
    Ultra Member Verified Member
    ECF Veteran
    KurrptSenate's Avatar
    Join Date
    Oct 2013
    Location
    PA
    Posts
    2,184

    Default

    Lo for short makes sense in that respect but I bought a blister pack of heads and had the same effect. I can get it to cape now but the tank is so loose.

Page 1 of 3 123 LastLast

Tags for this Thread

Bookmarks