Tasteless cotton wick?
Page 1 of 2 12 LastLast
Results 1 to 10 of 15
Like Tree5Likes

Thread: Tasteless cotton wick?

  1. #1
    Full Member Verified Member
    ECF Veteran

    Join Date
    Jan 2013
    Location
    CA, San Jose
    Posts
    90

    Default Tasteless cotton wick?

    Hello all,
    Today I was playing around with my Kanger T3, I found that there are 2 pieces of wick, 1 with coil wrap around and 1 just lay on top. Now, I have been having some small issue with T3 due to burn taste (may be because I use 50/50 juice?) Anyway, I took out the top wick and replace it with a 100% wick I made from a cotton ball. After 10 min, i took a drag, 1st drag was nothing, no vapor, no flavor. Then I took a 2nd drag, long drag, there's some vapor but absolutely no taste. After like 5 drags, I gave up and put back the original wick. Am I doing something wrong?

  2. #2
    PV Master Team ECF (folding@home)
    Verified Member
    ECF Veteran
    Thrasher's Avatar
    Join Date
    Oct 2012
    Location
    Madeira beach, Fla
    Posts
    7,774

    Default

    i notice this in a few attys now once removed the taste and vapor improves, i dont know who thought laying a wick on top of the coil was a good idea but it doesnt work this way lol

    i bought these Excalibur tanks and they had zero flavor and lame vapor production, opened the head and a wick fell out once removed they vaped like monsters.
    might have to thin the juice just a little bit also for 50/50
    Last edited by Thrasher; 02-03-2013 at 02:22 PM.

    Semovar - Provari - Roller - Poldiac - Megatron - Nemesis


  3. #3
    PV Master Verified Member
    ECF Veteran
    donnah's Avatar
    Join Date
    Aug 2010
    Location
    Albemarle, North Carolina
    Posts
    4,331
    Blog Entries
    14

    Default

    I once tried laying an extra piece of cotton over the coil and it didn't work either, from what I've seen others do, I gather that you have to lay the extra strips on top of the wick that's in the coil, leading up to the coil but not on top of it. This is for extra wicking, but I've found that cotton wicks really well for me and doesn't need any help.

    Also, cotton needs a little more time to soak and saturate. I've found that cotton gives me (in my Drunker tank) just as much flavor as SS mesh in my other rbas. Don't write it off, give it another try.

  4. #4
    Ultra Member ECF Veteran JuniorNA's Avatar
    Join Date
    Feb 2010
    Location
    NJ
    Posts
    1,134
    Blog Entries
    1

    Default

    I actually had the same results with a cotton wick - from a cotton ball. I didn't boil it or anything and I thought maybe that was the problem. I even soaked the cotton with juice and still no flavor. Maybe someone here can tell us if we didn't wait long enough for the cotton to soak the juice ? Maybe we had to wait an hour ? I only waited 2 min lol


    Connected via T-A-Talk


  5. #5
    Ultra Member Verified Member
    ECF Veteran

    Join Date
    Nov 2010
    Location
    Cary, NC
    Posts
    1,732

    Default

    Quote Originally Posted by JuniorNA View Post
    I actually had the same results with a cotton wick - from a cotton ball. I didn't boil it or anything and I thought maybe that was the problem. I even soaked the cotton with juice and still no flavor. Maybe someone here can tell us if we didn't wait long enough for the cotton to soak the juice ? Maybe we had to wait an hour ? I only waited 2 min lol


    Connected via T-A-Talk
    Cotton needs a bit more time to soak and absorb the juice. Cotton ball wicks are some of the fastest cotton wick to soak, but it's still recommended to soak for an hour -- or three. The longer the better. Otherwise you're just going to burn the cotton, and quickly.

  6. #6
    Full Member Verified Member
    ECF Veteran

    Join Date
    Jan 2013
    Location
    CA, San Jose
    Posts
    90

    Default

    After 4 hour of soak, it's still tasteless. What am I doing wrong?

  7. #7
    Ultra Member ECF Veteran JuniorNA's Avatar
    Join Date
    Feb 2010
    Location
    NJ
    Posts
    1,134
    Blog Entries
    1

    Default

    Quote Originally Posted by Ejuice4cig View Post
    After 4 hour of soak, it's still tasteless. What am I doing wrong?

    Dude, the same thing is happening to me. Let me tell you what i did so you can see if we are doing the same thing.

    I pulled out a piece of cotton from a brand new/clean cotton ball - I rolled it into a wick the size of 2 toothpicks (not good with MM sizes).
    I boiled that cotton wick for 30 minutes, and changed out the water at the 15 min mark. after i took it out, i used a sewing needle, and i wrapped 4/5 of 32 gauge nichrome 60. I then installed into my VIVI tank atty head and filled my chamber. filled 2.5 mil of PG juice, and let it soak for 30 minutes, i also dropped 4 drops directly on the coil, and when i fired it up, all looked good.

    I then took some hits and it was tasteless, well i tasted cotton but nothing else. i didnt taste anything but cotton. Not burned cotton, but just botton (it was a very dry starchy/cottony hit).
    I then let it soak on its side for 6 hours, and standing up for 6 hours - and after 12 hours, it still tastes horrible .

    I gave up and ordered 100 feet of 2.5 mm silica and i will just stick with that. It's not "that" bad, and it's been working for me all this time, so i'm not going to bother messing around with Cotton if it's just going to give me a headache and annoy me. unless perhaps i'll try cotton yarn size #1/0


  8. #8
    Super Member Verified Member
    ECF Veteran
    Supporting Member
    PepNYC's Avatar
    Join Date
    Dec 2010
    Location
    Charlotte, NC
    Posts
    760

    Default

    Quote Originally Posted by JuniorNA View Post
    Dude, the same thing is happening to me. Let me tell you what i did so you can see if we are doing the same thing.

    I pulled out a piece of cotton from a brand new/clean cotton ball - I rolled it into a wick the size of 2 toothpicks (not good with MM sizes).
    I boiled that cotton wick for 30 minutes, and changed out the water at the 15 min mark. after i took it out, i used a sewing needle, and i wrapped 4/5 of 32 gauge nichrome 60. I then installed into my VIVI tank atty head and filled my chamber. filled 2.5 mil of PG juice, and let it soak for 30 minutes, i also dropped 4 drops directly on the coil, and when i fired it up, all looked good.

    I then took some hits and it was tasteless, well i tasted cotton but nothing else. i didnt taste anything but cotton. Not burned cotton, but just botton (it was a very dry starchy/cottony hit).
    I then let it soak on its side for 6 hours, and standing up for 6 hours - and after 12 hours, it still tastes horrible .

    I gave up and ordered 100 feet of 2.5 mm silica and i will just stick with that. It's not "that" bad, and it's been working for me all this time, so i'm not going to bother messing around with Cotton if it's just going to give me a headache and annoy me. unless perhaps i'll try cotton yarn size #1/0

    Have you tried 100% Cotton Braided wick? Not cotton balls, not cotton pads, not any type of cotton you can buy at a drug store. It's actually candle wick. I use the 2mm size for my ViVi's and Kangers and it works great. Just fluff it up a bit after you build the coil or add the flavor wick and you're good to go. It's cheap. You can get about 10 yards for $3. Just make sure it's pure cotton and you may want to boil it for a bit before ya use it. Oh..and don't dry burn it. Yuck. Good luck guys.

  9. #9
    Full Member Verified Member
    ECF Veteran

    Join Date
    Jan 2013
    Location
    CA, San Jose
    Posts
    90

    Default

    Hi JuniorNA,
    I did very similar to you, but the cooking is a lot less.

    Hi PepNYC,
    I will try the 100% cotton braided wick.

    Thank you,
    ANdy

  10. #10
    Ultra Member ECF Veteran JuniorNA's Avatar
    Join Date
    Feb 2010
    Location
    NJ
    Posts
    1,134
    Blog Entries
    1

    Default

    Quote Originally Posted by PepNYC View Post
    Have you tried 100% Cotton Braided wick? Not cotton balls, not cotton pads, not any type of cotton you can buy at a drug store. It's actually candle wick. I use the 2mm size for my ViVi's and Kangers and it works great. Just fluff it up a bit after you build the coil or add the flavor wick and you're good to go. It's cheap. You can get about 10 yards for $3. Just make sure it's pure cotton and you may want to boil it for a bit before ya use it. Oh..and don't dry burn it. Yuck. Good luck guys.
    Hi Pep, i have not tried 100% cotton wick. I just tried the cotton balls, and cotton yarn. where can I get the cotton braided wick? like a Michaels ? arts and crafts store?
    PepNYC likes this.


Page 1 of 2 12 LastLast