Protank RB w/Micro Coils
Results 1 to 10 of 10
Like Tree3Likes
  • 1 Post By KlonedAspect
  • 1 Post By gotalotgoingon
  • 1 Post By KlonedAspect

Thread: Protank RB w/Micro Coils

  1. #1
    Full Member Verified Member
    Join Date
    Jul 2013
    Location
    Pocatello, ID, 83201
    Posts
    21

    Default Protank RB w/Micro Coils

    Interested in starting to re-build my protank heads and I am interested in using Micro Coils. have some ?'s for you RB pros...

    I have not re-built anything as of yet so bare with me...

    1. Can I use the Evod heads to re-build with micro coils or should I stick with the original heads?

    2. I am assuming that the process would be the same as re-building with a normal sized coil just micro scale... The videos show the process of how...

    3. Anyone have pictures of their protank micro coil re-builds?

    4. As for wick on the micro size. Is there a silica small enough or would I use a cotton ball style wick?

    I am sure I will think of more questions and will be ordering the gear soon.

    Appreciate all your info!

    Kloned
    Last edited by KlonedAspect; 07-19-2013 at 10:27 PM. Reason: Another ?

  2. #2
    Moved On Verified Member
    Join Date
    Jan 2013
    Location
    Minnesota
    Posts
    286

    Default

    either head will work for micro coils they are the same size so it doesnt matter. you want the inner diameter of the coils to be less than or equal to 1/16" i believe some 1mm silica could fit in. but i prefer cotton anyways. it would be easier to slide cotton through it. other than that its pretty simple there is youtube vids all over about rebuilding the protank so just make really tiny really close coils on it and you got yourself an excellent vape

  3. #3
    PV Master Verified Member
    ECF Veteran
    Supporting Member
    Thunderball's Avatar
    Join Date
    May 2013
    Location
    Grayson, Georgia
    Posts
    3,008

    Default

    .......
    Keep Calm and Vape On !


  4. #4
    Full Member Verified Member
    Join Date
    Jul 2013
    Location
    Pocatello, ID, 83201
    Posts
    21

    Default

    Sounds good. I have my kanthol ordered.. When I get it in I'll post how it works. See how well I can do. Appreciate your info!

    Kloned
    REOfanatic likes this.

  5. #5
    Moved On Verified Member
    Join Date
    Jan 2013
    Location
    Minnesota
    Posts
    286

    Default

    yeah keep us updated

  6. #6
    Ultra Member* Verified Member
    ECF Veteran
    gotalotgoingon's Avatar
    Join Date
    Mar 2013
    Location
    Nebraska/Dutch Harbor, AK
    Posts
    1,831

    Default

    I rebuilt a coil stock protank heads yesterday using micro coils and cotton. My lowest resistance build was .2ohms. Hit hard and the cotton held up without a burnt taste or a dry hit.
    REOfanatic likes this.

  7. #7
    Moved On Verified Member
    Join Date
    Jan 2013
    Location
    Minnesota
    Posts
    286

    Default

    cotton is the most amazing wick ever!

  8. #8
    Full Member Verified Member
    Join Date
    Jul 2013
    Location
    Pocatello, ID, 83201
    Posts
    21

    Default

    Quote Originally Posted by gotalotgoingon View Post
    I rebuilt a coil stock protank heads yesterday using micro coils and cotton. My lowest resistance build was .2ohms. Hit hard and the cotton held up without a burnt taste or a dry hit.
    I'm trying to stay out of the sub ohm area.. I have not even scratched that surface or began to look at mechanicals.. I use an ego-t and an eVic as of now. From what I have read the eVic won't fire sub ohm coils.. Hoping to get around 1.8 ohms or around there.

    I have a phoenix style dropper that I'm going to build up as well.

    Also going to get the igo-l off of fasttech and the dual post as well (I think it's the v5?)

    Interested in setting up a dual micro coil and see what it does..

    Kloned

  9. #9
    Moved On Verified Member
    Join Date
    Jan 2013
    Location
    Minnesota
    Posts
    286

    Default

    the v5 is a nimbus clone its triple post so its pretty nice have like 10 of my own

  10. #10
    Full Member Verified Member
    Join Date
    Jul 2013
    Location
    Pocatello, ID, 83201
    Posts
    21

    Default

    Decided to grab the igo-l, the v5 three hole and the v9, see what I can do with them to start.
    REOfanatic likes this.

Tags for this Thread

Bookmarks