Page 4 of 16 FirstFirst 1234567814 ... LastLast
Results 31 to 40 of 151
Like Tree118Likes

Thread: Fogger v2 performance upgrades

  1. #31
    Super Member Verified Member
    ECF Veteran
    adrkaushal's Avatar
    Join Date
    Dec 2012
    Location
    India
    Posts
    426
    Blog Entries
    2

    Default

    Quote Originally Posted by BJ43 View Post
    Do you have a multimeter? Check it for continuity. If you don't have a meter take it apart a check all the positive insulation points.
    I do not have a multimeter. So I guess, I will open it up and see what happened lol.

    Quote Originally Posted by Arvidx View Post
    I can almost guarantee, your positive post screw was too low when you fastened it to the mod, and it shorted out in the AFC chamber. That can kill the battery and cause the bump you mentioned. You really need to be careful on the bottom post adjustment on this one it WILL short if you leave it too long when you screw it down onto a mod.
    Actually, its my fault, nothing wrong with the post. I removed the old coil that came with it and used a thinner wire. On first ignition, the coil got burnt. I thought, lets double the wire and then form a coil (I must've been high lol). I think the double wire coil shorted not only the fogger but also the battery. Lesson to learn, don't f around with a badass


    *Note to merchants: Please keep Ceramic Ropes in your store*

  2. #32
    PV Master Verified Member
    ECF Veteran
    Supporting Member
    BJ43's Avatar
    Join Date
    Nov 2008
    Posts
    5,550

    Default

    Quote Originally Posted by Abracastabya View Post
    Any video tutorials on this? Since the cotton/hemp is on the outside of the coil (like a filler material) does that mean that you leave the center of the coil void?
    Yes this is a hollow coil, just like a carto with filler around the outside and all the air goes thru the coil. Thermodynamically more efficient than a wick thru coil.

    More info: Just hemp
    Last edited by BJ43; 10-25-2013 at 12:54 PM.
    DrMA likes this.

  3. #33
    Senior Member* Verified Member
    ECF Veteran
    Abracastabya's Avatar
    Join Date
    Jul 2011
    Location
    Corona, CA
    Posts
    150
    Blog Entries
    2

    Default

    Quote Originally Posted by BJ43 View Post
    Yes this is a hollow coil, just like a carto with filler around the outside and all the air goes thru the coil. Thermodynamically more efficient than a wick thru coil.

    More info: Just hemp
    Excellent! Thanks!

    69 Mod - Cobra Atty - 28 GA Kanthal - 5/4 Wrap - 325 Mesh

  4. #34
    Member
    Join Date
    Aug 2013
    Location
    Puerto Rico
    Posts
    8

    Default

    This is my setup.. 29 gage Kanthal with cotton wick @ 1.4ohms

    e-cigarette-forum.com/forum/attachment.php?s=d2421a499b8c5b41280980c49d5fd891&attachmentid=266118&d=1382801189" id="attachment266118" rel="Lightbox_11097199" >Fogger v2 performance upgrades-856603_319036771571144_325526875_o.jpgFogger v2 performance upgrades-882243_319036884904466_512672318_o.jpgFogger v2 performance upgrades-1147538_319036964904458_714872616_o.jpgFogger v2 performance upgrades-1400666_319036848237803_1482323392_o.jpgFogger v2 performance upgrades-1403078_319036791571142_48156587_o.jpg
    BJ43, jac1766 and Phone Guy like this.

  5. #35
    Super Member Verified Member
    ECF Veteran
    adrkaushal's Avatar
    Join Date
    Dec 2012
    Location
    India
    Posts
    426
    Blog Entries
    2

    Default

    The question is, how long will that cotton wick survive? I guess, 2 days at the most. And then, another round of pulling the wick out and inserting another through the coil .. that's a painful job lol


    *Note to merchants: Please keep Ceramic Ropes in your store*

  6. #36
    Full Member Verified Member jhev's Avatar
    Join Date
    Jul 2013
    Location
    Panama City Beach, FL, USA
    Posts
    94

    Default

    My cotton wicks last about a week in the fogger unless I want to change up juice then I switch the wick out but only takes about ten minutes
    adrkaushal likes this.

  7. #37
    PV Master Verified Member
    ECF Veteran
    Supporting Member
    BJ43's Avatar
    Join Date
    Nov 2008
    Posts
    5,550

    Default

    My hemp with a vertical is lasting a good 10 days.

  8. #38
    Super Member Verified Member
    Join Date
    Jul 2013
    Location
    New York NY
    Posts
    535

    Default

    Quote Originally Posted by BJ43 View Post
    My hemp with a vertical is lasting a good 10 days.
    Lovin the hemp, but how long it lasts depends on your juice, the gunkier it is the less it lasts, the hemp fiber doesn't burn up but has to be cleaned

  9. #39
    Full Member Verified Member
    Join Date
    Oct 2013
    Location
    UK
    Posts
    53

    Default

    Top thread thanks bud!

  10. #40
    Senior Member Verified Member
    ECF Veteran
    StillMaticc's Avatar
    Join Date
    Apr 2013
    Location
    Brooklyn, New York
    Posts
    237

    Default

    I'm now at that dreadful day. Must change the wick.

    So far, two weeks in on my first wick/coil in my fogger and its been great, but now I've gotta swap the cotton. I'm contemplating doing some of the safety modifications to it too, but my biggest concern is putting another piece of cotton in there and getting it to work flawlessly like the first did. No leaks, no dry hits.

    Two weeks on cotton, I can't even use my other devices, they taste like crap compared to this.
    jubiare likes this.

Page 4 of 16 FirstFirst 1234567814 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •