eBaron Dripper Spiral RBA
Page 1 of 10 12345 ... LastLast
Results 1 to 10 of 91
Like Tree93Likes

Thread: eBaron Dripper Spiral RBA

  1. #1
    PV Master Verified Member
    ECF Veteran
    Technonut's Avatar
    Join Date
    Oct 2010
    Location
    East Coast, USA
    Posts
    3,957

    Default eBaron Dripper Spiral RBA

    Anyone else get the eBaron Dripper Spiral RBA while they were in stock?

    eBaron Dripper Spiral

    It combines amazing performance with the taste output of a 306. It can take 12-15 drops of liquid when dry and 5-10 thereafter without any "flooding", leaks or mess. This extraordinary little tank is without any doubt a step ahead from any other "Dripping" device on the market.
    It takes pre-made coils set on ceramic base that are small powerhouses and require less than a minute to be fitted....
    I read a couple of reviews / posts on other forums that discussed successfully feeding the eBaron Dripper Spiral on a Grand, and another bottom-fed mod.

    I have one on the way, and figure I'll be able to vape awhile in-between squonks with this one... I also like the ceramic cup setup.. I found a vid on DIY coil rebuilding for this, and also found Cisco's pre-wound wick / coils which should work at only $6.99 for 5 of them... Rebuildable Atomizer Coils With Non-Resistance Leads - Avid Vaper



    EDIT: Here's A Review:

    REVIEW OF THE eBARRON DRIPPING ATOMISER FOR ELECTRONIC CIGARETTES - YouTube

    Last edited by Technonut; 12-08-2012 at 02:17 PM.
    FeistyAlice and 4mudski like this.


    "Dream as if you'll live forever. Live as if you'll die today"

  2. #2
    Ultra Member Verified Member
    ECF Veteran
    hildicat's Avatar
    Join Date
    Dec 2011
    Location
    SoCal
    Posts
    1,295

    Default

    Beat me to the punch! I saw this as well and was about to post about it. Seems like it should work well and allow for the familiar blind squonk, thought it looks like it will only fit the Grand.

    I was on the site and about to pull the trigger, then I realized it was gonna cost me about $75. Glad you took the plunge first. Let us know how you like it. If its great I might have to try one as well, but right now I have more RBA's than REO's...
    Its getting a little crazy!
    JC Okie and FeistyAlice like this.

    Reos/RM2's/Cotton/DIY

  3. #3
    PV Master Verified Member
    ECF Veteran
    Technonut's Avatar
    Join Date
    Oct 2010
    Location
    East Coast, USA
    Posts
    3,957

    Default

    Quote Originally Posted by hildicat View Post
    Beat me to the punch! I saw this as well and was about to post about it. Seems like it should work well and allow for the familiar blind squonk, thought it looks like it will only fit the Grand.

    I was on the site and about to pull the trigger, then I realized it was gonna cost me about $75. Glad you took the plunge first. Let us know how you like it. If its great I might have to try one as well, but right now I have more RBA's than REO's...
    Its getting a little crazy!

    Sure thing.... I'll post my experience after it arrives. I've read where folks are using only Kanthal for rebuilds instead of no-resistance / resistance wires, and are having good results.

    I think the Dripper Spiral is going to be a very nice RBA due to it's design, and will work well for the Grand / VVG...
    FeistyAlice likes this.


    "Dream as if you'll live forever. Live as if you'll die today"

  4. #4
    REOnaut Forever Verified Member
    ECF Veteran
    Supporting Member
    FeistyAlice's Avatar
    Join Date
    Aug 2010
    Location
    Near Dallas Texas
    Posts
    11,550

    Default

    Anxiously awaiting your experience. I left a comment on the Youtube video asking for outside diameter measurement of base. It would be incredible if it would fit the REO Mini. Nice and short.

    Hugs, Feisty Alice
    Sterno and Technonut like this.
    Yes, women do suffer from PMS; Patriarchy, Misogyny, and Sexism.



  5. #5
    Forum Supplier ECF Veteran redeyedancer's Avatar
    Join Date
    Feb 2010
    Location
    Maine
    Posts
    13,957

    Default

    I to am curious awaiting your feed back
    Sterno, FeistyAlice and Technonut like this.

  6. #6
    Super Member Verified Member
    ECF Veteran
    4mudski's Avatar
    Join Date
    Feb 2012
    Location
    Ohio
    Posts
    361

    Default

    Will this ever end???
    FeistyAlice likes this.

  7. #7
    Forum Supplier ECF Veteran redeyedancer's Avatar
    Join Date
    Feb 2010
    Location
    Maine
    Posts
    13,957

    Default

    Quote Originally Posted by 4mudski View Post
    Will this ever end???
    Nope rbas are here the market will be flooded with them I seen it coming
    Sterno, JC Okie and FeistyAlice like this.

  8. #8
    Ultra Member Verified Member
    ECF Veteran
    hildicat's Avatar
    Join Date
    Dec 2011
    Location
    SoCal
    Posts
    1,295

    Default

    Wondering if you've gotten your Spiral yet? Looks like they're in stock...

    Quote Originally Posted by Technonut View Post
    Anyone else get the eBaron Dripper Spiral RBA while they were in stock?

    eBaron Dripper Spiral

    Wondering if you've gotten your Spiral yet? Looks like they're in stock

    I read a couple of reviews / posts on other forums that discussed successfully feeding the eBaron Dripper Spiral on a Grand, and another bottom-fed mod.

    I have one on the way, and figure I'll be able to vape awhile in-between squonks with this one... I also like the ceramic cup setup.. I found a vid on DIY coil rebuilding for this, and also found Cisco's pre-wound wick / coils which should work at only $6.99 for 5 of them... Rebuildable Atomizer Coils With Non-Resistance Leads - Avid Vaper



    EDIT: Here's A Review:

    REVIEW OF THE eBARRON DRIPPING ATOMISER FOR ELECTRONIC CIGARETTES - YouTube


    Reos/RM2's/Cotton/DIY

  9. #9
    PV Master Verified Member
    ECF Veteran
    Technonut's Avatar
    Join Date
    Oct 2010
    Location
    East Coast, USA
    Posts
    3,957

    Default

    Quote Originally Posted by hildicat View Post
    Wondering if you've gotten your Spiral yet? Looks like they're in stock...

    Still waiting on it to be delivered... Hopefully, (If no problem with Customs) this week sometime.
    Sterno likes this.


    "Dream as if you'll live forever. Live as if you'll die today"

  10. #10
    Double Guru Verified Member
    ECF Veteran
    Sterno's Avatar
    Join Date
    May 2010
    Location
    Tornado Alley
    Posts
    22,187

    Default

    hey lee have you got any of the A7s ?

    A Prohibition law strikes a blow at the very principles upon
    which our government was founded
    . Abraham Lincoln

Page 1 of 10 12345 ... LastLast

Bookmarks