New Version 510 C-E2 Ceramic Cartomizer

[Pheisty]

Debb, do you have any leaking issues or anything with those cartos? Do you have the newest version? Really interested in these myself, but still a bit skeptical. I just don't want a mil of liquid spilling out into my pocket. What if you turn it upside down, does it leak then?

I am having issues with leaking, but I've modded them a bit by removing the third plug for easy filling purposes. That third plug is a PITA to remove and I have zero patience.

Anyway, yes, even when I lie it down flat attached to my Joye510 it gurgles quite a bit when I fire it up.

[Pheisty]

there is a newer version weeks away called the c-e2 R4-FV(final version)
No leaking, no primer,new inner plug and something i cant discuss that will help with the wicking , i prefer the ptb mod myself but if what they did for the slits helps the wicking even further then great.

I'm almost peeing my pants with excitement. For real. I want them. Now. These things are already a dream come true for me, but if they can improve by fixing the leaking, no primer, and wicking performance??? OMG, I'll be buying them by the crate.

[badkolo]

if you do the ptb mod, even with the wick in place, you can fold up ptb and just place it behind the slits, that will stop the leak, just place the center plug or the inner plug backwards and it wont leak even upside down.
YouTube - Edition 2, E2 cartomizer R3 ceramic PTB MOD HOW-TO instructional &lt;<<<<<< ptb mod with wick in place, you dont have to make the ptb as wide or long as i did.

then when you want to step up, then follow the newest one which uses no wick pass the cup slits.
http://www.youtube.com/user/DJbizzum.../3/rbdtLTXSvYg

also the newest versions r3v2 and the new r4 does not leak, that has been fixed and primer has been removed.

[sonnetjie]

Mine should be here Tuesday. Can't wait.

[B4DJ1N64N]

The original Joye510 cartomizer are better than these Edition 2 Carto (I'm using 510 C-E2 Release 3) IMHO, but then again maybe it's just my personal taste. For me, Edition 2 Carto wicking aren't fast enough and leaks. I have no problem found in my Joye510 carto, no leaks, consistent vapor till the last drop.
I bought my Joye510 carto from heavengifts.

[badkolo]

The original Joye510 cartomizer are better than these Edition 2 Carto (I'm using 510 C-E2 Release 3) IMHO, but then again maybe it's just my personal taste. For me, Edition 2 Carto wicking aren't fast enough and leaks. I have no problem found in my Joye510 carto, no leaks, consistent vapor till the last drop.
I bought my Joye510 carto from heavengifts.

yes the r3 leaked until now, that has been solved, i have the newer ones and they dont leak and the new inner cap helps with wicking., the new R4 also removes the primer and some other stuff was done to help with wicking. but it also could be that your using a low ohm e2 at to high of a voltage.

the issue with the joye carto is that its still using filler. also i heard the joye one lasts 30 minutes at best before a refill, i can get hours of use on one fill on the e2

[Pheisty]

The original Joye510 cartomizer are better than these Edition 2 Carto (I'm using 510 C-E2 Release 3) IMHO, but then again maybe it's just my personal taste. For me, Edition 2 Carto wicking aren't fast enough and leaks. I have no problem found in my Joye510 carto, no leaks, consistent vapor till the last drop.
I bought my Joye510 carto from heavengifts.

Filler sucks. It interferes with the true flavor of the juice. If you're simply vaping to get nicotine in a way that is similar to smoking and flavor isn't an issue, no big deal. But if you're like me and want exquisite flavor without having to drip, you take the leaking issue in stride and simply wait for the 4th release. (I'm not having any trouble with the R2 wicking, btw.)

Right now I'm keeping my Joye510 upright in a cup when I'm not using it to prevent leakage. I'll deal with it until the 4th release is available, since I can't find any Lipton ptb's (for badkolo's mod) anywhere in my neck of the woods--or maybe I'll order some online. Otherwise, I'll make do with my KR808 model when I'm traveling (although it's freakin' hard to go back now that I've been spoiled with the awesome flavor of the C-E2), or will just keep an empty cup in my cupholder in my car for when I need to put my Joye510 down.

Any hints on when the R4 will be released, badkolo?

[badkolo]

well right now the r3 version 2 is being shipped out to people, the r4 samples are being sent out this week for testing and if all is well they should be released in 2weeks I would say. it could happen earlier though
you can enlarge the hole on the inner plug or center plug with a cuticle cutter, this gives better airflow and then you can place it on top of the cup and it will stop it form leaking.

now if oyu have the ones that leak becuase of the slit area then without ptb you can pull out the wick on each side, there will be a looped wick and one single strand on each side
you can cut the single strand of wick right at the cup leaving the looped wick in place and tuck that back into the cup, then you make a small loose knot in the strand of wick cutting off any excess and placing that back behind the slits like the ptm method , this will stop the leaking into the cup until the r4 is released or until you get ptb for these
you could also take the strand that you cut and place it over the coil and into the slits on each end to get more wicking action.
.

[MrJoseph]

if you do the ptb mod, even with the wick in place, you can fold up ptb and just place it behind the slits, that will stop the leak, just place the center plug or the inner plug backwards and it wont leak even upside down.
YouTube - Edition 2, E2 cartomizer R3 ceramic PTB MOD HOW-TO instructional <<<<<<< ptb mod with wick in place, you dont have to make the ptb as wide or long as i did.

then when you want to step up, then follow the newest one which uses no wick pass the cup slits.
YouTube - DJbizzum's Channel

also the newest versions r3v2 and the new r4 does not leak, that has been fixed and primer has been removed.

also the newest versions r3v2 and the new r4 does not leak, that has been fixed and primer has been removed.

HELP PLEASE, I haven't watched any of your Video yet, just wanted to catch you before you go, ... despite your explanation about which ohm is best for what voltage, i am still confused ( i am still a newbie btw), i think part of my confusion is that you referred to the ego as a 3.3 V and i always thought that my ego was a 3.7V, the help i am seeking is " what is the best ohm i should order for my ego?, i was about to make an order for [C-E2 R4 XL-Cartromizers for 510 EGO], but couldn't decide on weather to go for 2.4 to 2.6 or 2.6 to 2.8 or the 3.0 to 3.2, my bet was on the middle one, but it is one and only order i am going to make for a looong time, so i wanna make sure that i got the absolute right ones, and i hope they just work the way they advertise them out of the box, i really really hope to avoid any moding, another quick Q, sorry if it sound too stupid, but what is the advantages the mega xl have over the reg ones, anything other they are bigger and maybe hold more juice?
also, is the C-E2 R4 for 808D-1 a good carto for the ego, and will it fit, i read before that people likedthose over the 510 carto and suggested to use them with an adopter, but that was before those new ceramic ones came out ( i guess), do you think that they are a good buy for the ego too, i can add those as well to my order of the xl or the not xl( depend on your advice)

[Stoked!]

PTB ROCKS!!!!!!! YOU MUST TRY IT!!!

E2s are the best thing I have ever tried including almost everything at this point including all cartos and attys at low and high ohms....WITH THE PTB!!!

They are so easy to clean that I actually clean them...ha ha. I pour some cheap vodka into the carto (where the juice would go) with all of the center rings removed (ceramic cup displayed)...shake...dump...repeat once...dry burn until coils are bright orange and wick btwn coils is white again...and thats it.... Fill and vape. Tastes perfect to me after a cleaning unlike former cartos....sometimes they would taste clean and sometimes I would chuck them after cleaning.

So far not with these.

Poking holes in the wick with a needle or pin between the coil is also necessary with the original ceramics at least...but I hear people still do it. 10 pokes every now and always makes me smile.

I learned all of this from reading the very long technical discussion thread and watching Bad's videos. You really need to check all of the above out...the videos are the fastest way to learn of course.

So far my E2 experience: 3.7 volts (various batts and mods) with 808 E2 ceramic R1 2.5ohm.

I'm about to get a shipment of all higher ohms due to my 3.7 volt habit.

Vape on!!!